Used Hegla Lg 30 L for sale (76,665)

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2039691, overall weight: 330 kg, Hegla Gripper Model: LG 30L Load capacity: 3000 kg Maximum lifting height: 3210 mm Year: 2006 Own weight: 330 kg Nlodpezq Rrpofx Ahnsf

Condition: good (used), Year of construction: 2011, Glass loading fork for jumbo sizes and oversized items Device for oversized glass with safety display. Max. glass size: Width: 8000 mm, height: 3400 mm. Load capacity: 5800 kg. Nledpexw Hrfofx Ahnsf External dimensions: Width: 5900 mm. Height: 4220 mm. Depth: 600 mm. Weight: 780 kg. Condition: very good, second-hand.

Condition: good (used), Year of construction: 2001, Loading fork for split dimensions. Max. Loading height: 2550 mm. Lifting capacity: 3000 kg. Height: approx. 3300 mm to hook eye, Nlsdpfjvc D S Rsx Ahnsf Length: approx. 2700 mm, Depth: approx. 600 mm.

Condition: good (used), Year of construction: 1996, Max. glass size: Width: 6000 mm, height: 3210 mm. Load capacity: 5000 kg. External dimensions: Nedpfx Ajxw Hr Sehnolf Width: 3800 mm. Height: 4070 mm. Depth: 700 mm. Condition: good, second-hand.

Condition: good (used), Year of construction: 1995, Load capacity: 3000 kg. Width: 2700 mm. Height: 3700 mm. Depth: 470 mm. Weight: approx. 490 kg. Nedjxpnn Ejpfx Ahnslf Condition: good, second-hand

Condition: good (used), Year of construction: 1994, Crane with mobile double bridge and additional single bridge. System length approx. 21000 mm System width approx. 7000 mm Max. column height: 4000 mm Transport rail lower edge 3800 mm Nlsdpfx Ahoxawkdonsf Incl. suction lifter Hegla MK10 Lifting capacity: 200 kg/rotation and tilt

Condition: good (used), Year of construction: 2012, functionality: fully functional, Matec 30 L, Year of manufacture 2012, Heidenhain iTNC 530 control, X/Y/Z travel 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63-A spindle mount, Electric handwheel, 20 bar internal coolant supply, Paper belt filter, Nledjzlc Hnspfx Ahnjf 80-way water coolant supply, Fully enclosed work area, Direct measuring systems, Chip conveyor, Bellows with steel blades, 3D measuring probe, Laser measuring device

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, year of manufacture 2010, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-position tool magazine, full enclosure of work area, direct measuring systems, chip conveyor, bellows with steel lamellae, 3D measuring probe, laser measuring device. Nedpfx Aszdqk Eshnjlf

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input current: 125 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Bystronic / Hegla laminated glass (VSG) cutting system Speedcut and ProLam 3700, comprising of following components: Nodezu Ayyjpfx Ahnelf - Speedcut float glass cutting table with tool changer and second cutting oil circuit, flat belt conveyor and air cushion, with 2 special cutting heads for laminated glass cutting (lower cutting head can be deactivated for float glass cutting) - Hegla conveyor belt TW 7833 RW - Hegla cross-cutting station STB I 33 - Hegla laminated glass cutting bridge ProLam 37 , including a traverne rotation device, remote maintenance via the internet using VPN, including software - Hegla air cushion table LTR 3034, with 4 support arms The entire plant is in excellent condition and will be available EXW from its current location from the end of December 2026.

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables Nsdpjzuy A Sofx Ahnslf - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Column width: 2650 mm Press force: 100 tons CNC control: AMADA AMNC PC 3D-graphic 15-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Dual speed of the X, R, and Z axes Automatic crowning Motorized adjustable backgauge Thrust: 550 mm Stroke: 350 mm Njdsv I Sp Iopfx Ahnelf Working height: 960 mm Laser monitoring: FIESSLER Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2002, operating hours: 16,767 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Year of manufacture: 2002 Empty weight: 5.530 kg Lifting capacity: 3.000 kg Number of valves: 3 CE mark: yes General condition: average Technical condition: average Nsdpfszv N Akjx Ahnslf Visual appearance: average Mast type: triplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - Free lift - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Reconditioned: Yes Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 Njdezubtljpfx Ahnelf • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: ready for operation (used), Year of construction: 2015, overall weight: 700 kg, load capacity: 16 kg, arm reach: 3,102 mm, number of axes: 6, This 6-axis KUKA KR 30 L 16-2 robot arm was manufactured in 2015. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. With 4 units available, each comes with a optional teach panel, KR C4 control unit, and cable set. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30 L 16-2 machine we have for sale. Contact us for further details. • 4 units available • Application Type: Robotic Handling / Material Handling Robot Nsdpfx Aozd Tgpehnslf • Controller: KRC 4 • Payload Capacity: 16 kg • Max Handling Weight: 16 kg • Reach: 3,102 mm • Weight: 700 kg • With teach panel, KR C4 control unit, cable set (optional)

Condition: used, Year of construction: 2006, Offer in progress! Nedpfxswftufo Ahnslf

Condition: good (used), functionality: fully functional, used dough divider rounder Record Erika Automat Classic Q2 30 tlg, checked, with moulding plates, for 30 pieces, weight range from 25 to 120 g, machine no. A110311, 1.5 kW, 3,8 A, 380 V, 50 Hz Nledpfx Aoy I A Rnehnjf

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: BOSCH, controller model: OSA3, number of axes: 4, This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Nledpfezvybdex Ahnsf Machine Benefits Technical Machine Benefits • Internal coolant supply

Condition: excellent (used), Year of construction: 2002, Complete system with support/transport table with edge delamination and storage rack for laminated safety glass. Automatic glass stop and glass-rotating device. Nodpfexap Axjx Ahnjlf

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, turning length: 600 mm, turning diameter: 300 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 670 mm, spindle motor power: 11 W, rotational speed (min.): 3,500 rpm, total length: 2,620 mm, total width: 1,480 mm, overall weight: 4,000 kg, bar passage: 65 mm, spindle nose: MT-NO.7, Equipment: documentation/manual, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine features a rigid construction, hydraulic chucking, and automatic tool changing, making it suitable for both small and medium production runs. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS Nlodpfezwdqrex Ahnof CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Chip conveyor *Specifications to be confirmed according to the individual machine configuration. ADVANTAGES DAINICHI, Japanese machine construction Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT IS NOT FUNCTIONAL. IT CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3-JAW CHUCK.

Condition: good (used), Year of construction: 1999, The system is electrically adjustable and has a total of 24 compartments. 2 compartments with a 210 mm shelf height and 22 compartments with a 150 mm shelf height. External dimensions: Height: 3520 mm Width: 8630 mm Nlodpfxezn U Ats Ahnsf Depth: 3520 mm Condition: good, second-hand

Condition: used, machine/vehicle number: 007905, Max. panel width: 1200 mm Max. panel length: 2500 mm Nlodpfxsy Nkrps Ahnof Length of conveyor: 13800 mm

Year of construction: 2018, condition: excellent (used), bestehend aus zwei Stück Zahnriemenachsen EGC-80-1300-BS-10P-KF-0H-ML-GK und vier Stück Linearführungsschienen HGR 20C 1705V9-10A00 mit HIWIM Linearblock HGW CCC 170 3W3-10200 Nledpfx Ahog Ixumonjf Zwei Unimotore 075E3C300BACAA075140 mit Zwei EMERSON UNIDRIVE M 701-3200050A

Condition: used, machine/vehicle number: 006467, Max. panel width: 1200 mm Max. panel length: 2500 mm Nledoyhbk Espfx Ahnof 90 degree transfer system: yes

Condition: good (used), Year of construction: 1995, Rack for split dimensions. Glass support depth per side: 505 mm Height from glass support: 2160 mm Nlodozcm Hnepfx Ahnjf Load capacity: 12,000 kg Max. loading height: 2550 mm Depth: 1410 mm Height: 2320 mm Width: 3000 mm Condition: good, second-hand

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts - laminated glass cutting module with cutting length : 4600 mm 4 unloading arms new heating element from december 2025 min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Njdpfx Aoyh T Rujhnjlf Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos