Used Hirzt F8 for sale (354)

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment Csdpfezwg Tijx Abtohb - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Year of construction: 2009, condition: excellent (used), I sell the throughfeed CNC drilling machine HIRZT Livra/B, Year 2009. Working width up to 820mm Configuration: 14 + 6 + 2 pcs. drilling units Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Total area covered: 2000 x 2000 (+800 +800mm) Total weight: 1350 kg. Chodpfx Aenxqdwsbtob With full documentation and CE. Very good condition. Available immediately.

Condition: good (used), Code: 0316 Brand: HIRZT - ITALY Model: MIREA - CE Standard Chodpfx Aoypm Tuebteb Automatic edge bander with hot melt glue for panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture and various - CE Standard Technical data: Glue application on the panel Panel height 10/50 mm Max edge thickness 1 mm Minimum panel dimensions 70 x 140 mm Automatic feed with belt drive - Feed speed 4 mt/min Power consumption 4 Kw Copying trimming unit: cutters mm 70 x 14 x 12 Z4 15 degrees Knife end trimming unit Extendable front support - Inlet extension - Worktable height 900 mm Overall dimensions mm 1900 x 1100 x 1250 h Weight kg 300

Condition: good (used), Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Cjdpfxey Hlaps Abtjhb Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420

Condition: used, Year of construction: 2014, functionality: fully functional, power: 3.8 kW (5.17 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece width (max.): 800 mm, number of axes: 3, overall weight: 1,100 kg, Equipment: CE marking, Horizontal drilling Vertical drilling Grooving Chjdpfxey Sh H Nj Abtjb Panel width up to 80 cm

Condition: excellent (used), mileage: 5,73,415 km, power: 206 kW (280.08 HP), first registration: 01/1979, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, Year of construction: 1979, Front axle: Steering Rear axle: Double wheels Number of cylinders: 6 Technical condition: very good Visual appearance: very good Chodpjzhxmvjfx Abteb Registration number: 1BRK466 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Chedjzl Rqhopfx Abtob Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-20-8714, functionality: fully functional, Equipment: CE marking, documentation/manual, KDF 860 Edition, serial no. 0-261-20-8714, year 2016 Feed speed 8–20 m/min, rounding 20 m/min, Csdpfx Abjzuxh Hjtehb workpiece width 70 mm, (8–22), minimum workpiece length 140 mm, CONFIGURATION: - Pre-milling - Spray separator - EVA adhesive application with QUICKMELT top preheating, Second glue pot A12 EVA (white glue) - Infrared workpiece heating - Side pressure (4 rollers; The first pneumatical) - Trimming with SOFTTOUCH function (smooth unit start-up); straight/angle trimming, exact/with overlap - Multifunctional multi-profile milling unit (R1 + R2 + chamfer); servo-adjustment - 2-motor SERVOTRIM rounding unit—controlled by linear motors on both axes, feed rate up to 20 m/min, soft-touch function for gentle contact of the unit with the workpiece, 4x servo-adjustment - Profile scraper unit – 4x servo-adjustment, dual-profile (R1 + R2) profiling guides with 0.01 mm step - Flat scraper unit, - Spray cleaner - Brushes, - Motorized beam lift, - Motorized infeed fence, - Full automation, - POWERTOUCH control system, - moveable workpiece support, - loading guide for narrow parts - upper belt pressure

Condition: defective spare-parts repository (used), functionality: not functional, power: 5.2 kW (7.07 HP), gearing type: mechanical, fuel type: gasoline, Year of construction: 1980, We are offering a Honda F800 single-axle vehicle with an attached sweeper attachment. Unfortunately, the engine has suffered a piston seizure and can therefore only be used as a source of spare parts. Chodpfx Abozw Awqjtjb

Condition: good (used), Code: 0125 Brand: OMEC - ITALY Model: F8 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard Cedpfx Abswl Iv Rstohb The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights. Technical data: No. 8 spindles Spindle revolutions /min 17,000 Maximum working width mm 400 Distance between centres of indents mm 25 Drawers production 120 / hour Power Kw 7,5 Working pressure 6 atm Overall dimensions: mm 1500 x 1000 x 1200 h Weight kg 1100

Condition: used, Year of construction: 1989, power: 7.5 kW (10.20 HP), input voltage: 380 V, input current: 15 A, input frequency: 50 Hz, Equipment: documentation/manual, Sale of woodworking equipment: 3 sawing lines (in working condition) We offer for sale 3 complete sawing lines for a woodworking enterprise. The equipment is used but fully operational – the lines are running and actively working right now, so you can inspect them under real-world conditions. Each line is self-contained, equipped with its own dust extraction system, and is sold only as a complete set (without disassembling the machines). 🛠 LINE #1 Productivity: 30–35 m³ per shift. Log length: from 1200 mm to 2500 mm. Configuration: Loading ramp, edger, crosscut saw, 2-arbor multi-blade saw A.Costa, resaw, dust extraction system. Power consumption: Total power – 170 kW (of which, the multi-blade saw itself – 40 kW). 🛠 LINE #2 (High power) Productivity: 60 m³ per 10 hours of operation. Log length: specifically for 2500 mm (crosscut saw installed). Configuration: Loading ramp, edger, crosscut saw, multi-blade saw A.Costa, resaw, dust extraction system. Power consumption: Total peak power – 430 kW. 🛠 LINE #3 (For long logs) Productivity: 35–40 m³ per shift. Cjdpfxozxzuds Abtjhb Log length: from 2500 mm to 4000 mm (4 meters). Configuration: Loading ramp, edger Walter, multi-blade saw Raimann, trimming saw, dust extraction system. Power consumption: Total power – 200 kW. 📍 Location and terms of sale: Terms of sale: Each line is sold separately and only as a complete set. Disassembling the machines within the lines is not considered. Purchase of the entire complex (all 3 lines) is possible. Price: Available upon request. Location: Volyn region, Kovel (20 km from the city). We invite you to inspect the lines in operation.

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Chodpfx Ajzwudcsbtsb Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: used, mileage: 1,30,556 km, first registration: 01/1991, fuel type: diesel, overall weight: 17,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, emission class: euro1, Equipment: all wheel drive, * Snow plough * Tank body * All-wheel drive 4x4 * Drum brakes Chodpfjxy Ehqex Abtob * Manual gearbox ----Internal vehicle number: N395-----Errors & prior sale excepted WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp.

Condition: used, mileage: 19,000 km, power: 100 kW (135.96 HP), first registration: 05/2000, overall weight: 7,495 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2027, gearing type: mechanical, emission class: euro2, loading space width: 2,290 mm, loading space length: 2,870 mm, loading space height: 1,600 mm, Year of construction: 2000, total length: 6,430 mm, total width: 2,400 mm, total height: 2,960 mm, number of seats: 9, Equipment: ABS, parking heater, First owner. Small volunteer fire department; it will remain fully operational at the fire station until the new vehicle is delivered in the summer of 2026. Originally driven only just under 19,000 kilometers. The vehicle passed its technical inspection (TÜV) without any issues on September 1, 2026, and was immediately approved for continued use. Valid until 09/2027. Last service at 18,138 km, with "no defects found." Maintenance was always performed exclusively at the local Iveco/Fiat authorized workshop, and this was consistently done until recently. 9 seats. WEBASTO AirTop 32 S auxiliary heating system. Fire engine LF 8/6 with a MAGIRUS superstructure, manufactured in 2000. 600-liter water tank. Equipped with a tank heating system. Rear pump FP 8/8 with 118 operating hours. Lighting mast located between the superstructure and the cabin. 24-volt and compressed air connection on the driver's side step. Engine: Iveco 4-cylinder inline diesel engine with 3908 ccm, Euro 2 emission standard; it starts and runs perfectly. 6-speed manual transmission. Differential lock on the rear axle. Maximum speed of 86 km/h, according to the vehicle registration documents. Robust truck chassis with leaf spring suspension. Power steering. ABS and ASR (Anti-Slip Regulation). Radio. Electrically adjustable exterior mirrors. Unladen weight according to vehicle registration documents: 5035 kg. Permissible total weight: 7495 kg. Overall vehicle dimensions: Length: 6430 mm / Width 2400 mm / Height 2960 mm. The box body has a main compartment measuring approximately 2.87 m long / 2.29 m wide / 1.60 m high. Chsdpfx Aezpgphsbtsb The roof is walkable, with a large storage box on the left side; the box lid is easy to open and close thanks to gas-filled struts. Interchangeable tow hitch with a 2000 kg braked trailer load or 1500 kg unbraked trailer load (ball and pintle hitch). Tires: MICHELIN with snow flake symbol, DOT code 2020. Size: 205/75R17.5. Condition: 6 tires are almost new. Batteries: 2x NEW in 2025. Prepared for digital radio communication. The special warning lights with front flashers are functional. The Martin horn has been removed and is no longer available. The fire engine has minor signs of wear and is generally well-maintained. The vehicle was handed over to us in a ready-to-use condition after being taken out of service. The Iveco with MAGIRUS-Weisweil superstructure is immediately available here. The necessary manuals with wiring diagrams and some documents are included; the service booklet was only filled out at the beginning, but all essential original documents from Iveco are available. There are 2 original Iveco vehicle keys that operate smoothly and identically in all 4 doors and also in the ignition lock. The compartment door locks and flaps are all easy to open and close. The Iveco has recently received several new parts. According to the mayor, this vehicle has not been involved in any accidents. The vehicle is explicitly offered here as an "operational vehicle." If the vehicle is not put back into service as an operational vehicle in the future, the special warning lights must be completely removed, and all vehicle markings must be removed. This offer is only valid for commercial enterprises and freelancers of all kinds, as well as for authorities and emergency services (BOS) of all kinds. Sales to purely private end consumers are excluded. Subject to prior sale and erroneous information. The offer is subject to §25

Condition: excellent (used), mileage: 1,43,109 km, first registration: 01/1979, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 6,550 mm, total width: 2,550 mm, total height: 3,150 mm, Year of construction: 1979, = Additional options and accessories = - PTO = Further information = Suspension: Leaf suspension Cedpfx Ajy Siawjbtshb Front axle: Steered; Reduction: Outer planetary axles Rear axle: Twin tires; Reduction: Outer planetary axles Number of cylinders: 6 Engine displacement: 11,334 cc Gross vehicle weight: 19,000 kg Technical condition: Very good Optical condition: Very good Please contact Thierry Leemans for further information.

Condition: ready for operation (used), Manufacturer: Handtmann / Stiller Model: VF830 Year: 2020 Chedpszxrx Hofx Abtob Condition: Used Serial number: 44613 Stock number: 3427P Filling pressure: up to 25 Bar Pump capacity: max 6000 kg/h Power: 3 x 400V, 50Hz, 6kW Dimensions: 2300 x 1500 x 2150 mm Weight: 1550 kg Infeed rotary table for empty cans Diameter: 1200 mm Handtmann / Verbufa filling machine for cans Type: 52088-A-0084 Serial number: 261960 Year of manufacture: 2020 Can diameter: 73 & 99 mm Power: 3 x 400V, 50Hz, 1.6kW Weight: 400 kg Double-head filling machine with Handtmann FST547 waterwheel With filling station and conveyor belt of 3200 x 2000 x 2200 mm Stiller can seaming machine Type: STA2000 Serial number: 20012 Year of manufacture: 2020 Capacity: up to 2000 cans/h Can diameter: 73 & 99 mm Can height: 30 - 300 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 3.6kW Dimensions: 2600 x 1100 x 2000 mm Weight: 570 kg Including conveyor belts and a rotary table with a diameter of 1200 mm.

Condition: excellent (used), Year of construction: 2021, operating hours: 632 h, lifting height: 4,800 mm, fuel type: electric, mast type: triplex, total height: 2,460 mm, total length: 5,500 mm, total width: 1,550 mm, color: other, Empty weight: 8.080 kg Lifting capacity: 5.000 kg Csdpfsy R Rr Esx Abtehb CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Freelift - LED-lighting - Non marking tires - Side shift - Work lamp(s) = Remarks = General Country of production: China Condition CE type: CE Fork positioner and side shift, lithium battery with charger, closed cabin

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp Chodpfoztbutsx Abtob - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 12,000 rpm, travel distance X-axis: 3,500 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 800 mm, table length: 4,000 mm, number of axes: 5, This 5-axis DOOSAN VCF850 was manufactured in 2018. It features a substantial X-axis travel of 3500 mm, Y-axis travel of 950 mm, and Z-axis travel of 800 mm. The machine operates at a maximum rotational speed of 12000 rpm and includes a BT40 tool holder type. If you are looking to get high-quality milling capabilities, consider the DOOSAN VCF850 vertical machining center we have for sale. Contact us for further details. • Operating hours: 4,500 h • Functionality: Fully functional • Capability: Continuous 5-axis operation Additional equipment • Rotary table Csdpfx Abjzw D Rxetehb Technical Specification Taper Size BT 40

Condition: used, Year of construction: 1998, total width: 1,100 mm, total length: 1,700 mm, total height: 1,150 mm, Colour: White Empty weight: 1.100 kg Chodpfx Abozvx N Hotjb - Year: 1998 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 980223 - Table length [mm]: 245 - Table width [mm]: 735 - Number of spindles [pcs]: 8 - Spindle diameter [mm]: 16 - Max. spindle speed [rpm]: 17000 - Distance between spindles [mm]: 50 - Workpiece clamps [pcs]: 2 - Workpiece support/Guide: Table - Drills included: Yes - Voltage [V]: 415 - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 1700mm x 1100mm x 1150mm (l x w x h) - Transport weight [kg]: 1100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 8220, Hermle UWF 801 Universal Tool Milling Machine with extensive accessories Manufacturer: Hermle Model: UWF 801 Year of manufacture: approx. 1986 Tool holder: SK40 Digital display: Heidenhain 3-axis digital display Description For sale is a Hermle UWF 801 universal tool milling machine from the in-house mold-making department of a medium-sized company specializing in plastic-bonded magnetic materials. The machine was used in production until the site was closed, for the manufacturing, processing, and maintenance of injection molds. It operated precisely and reliably until the very end and comes from a production environment with high requirements for accuracy and quality. Equipment ● Universal swiveling milling head ● Horizontal milling attachment ● Heidenhain 3-axis digital display Chodpfx Abozd Tbasteb ● Automatic feeds ● Coolant system ● Central lubrication ● Machine lighting ● Tool holder SK40 Scope of accessories The scope of delivery includes an extensive accessories package, including: ● numerous SK40 tool holders ● collet chucks ● collet sets ● milling arbors ● machine vice ● dividing head / rotary table accessories ● other tools and clamping accessories, as shown in the pictures Condition: The machine is in good, age-appropriate condition. It was used until the site was closed and then stored. This offer is a private sale. No guarantee is given. Inspection by appointment is highly recommended. Location Bergisch Gladbach near Cologne Loading Loading possible by arrangement. Price €5,900

Condition: like new (used), Year of construction: 2024, For sale: 8-colour offset printing press RMGT 970PF-8, configuration 8/0 or 4/4, with convertible perfecting unit. The machine is designed for high-quality industrial printing and is equipped with an extensive range of automation systems, including presetting, register control, cleaning systems, and colour measurement. Main technical specifications: Maximum paper size: 650 × 965 mm Minimum sheet size: 290 × 410 mm Minimum sheet size in perfecting mode: 370 × 410 mm Maximum printing area: 640 × 930 mm Maximum printing area in perfecting mode: 630 × 930 mm Maximum printing speed: 15,000 sheets/hour Stock thickness: 0.04–0.5 mm Plate size: 700 × 945 × 0.30 mm Feeder pile capacity: 1,100 mm Delivery pile capacity: 1,100 mm Machine dimensions L × W × H: 12,960 × 3,453 × 2,011 mm Equipment and features: PCS-G Printing Control System Rotary stream feeder Static eliminator on delivery Mechanical double-sheet detector Vacuum suction-type feeder board Paper size preset system Registration device Vertical and lateral image micro-adjustment Ultrasonic double-sheet detector Slewed sheet detector Side lay detector Front-lay Bernoulli device Side lay preset Printing, inking and dampening units: Straight edge plate clamp with positioning pins Infed lower swing gripper feed drum Gripper margin: 10 mm Remote control for vertical, lateral and diagonal register 19 inking rollers, including form rollers 4 dampening rollers R-matic dampening system Oscillating bridge roller Double-double-single perfecting cylinder configuration Chsdpfsy S S Azsx Abtob Delivery section: Static eliminator Chain gripper delivery Delivery jam detector De-curler device Board insertion device Powder sprayer High pile delivery Delivery area sensor Paper size preset system Paper guide under the first delivery drum Delivery belt guide Belt-type vacuum slow-down wheels Additional options: Automatic feeder pile lateral alignment function Blower guide under the swing Pneumatic pull side guide Feeder air preset Impression pressure preset Impression cylinder cleaning function Feed drum fan-out adjustment mechanism Automatic blanket cleaning device Automatic ink roller cleaning device Smart-FPC plate changing device Ink form rollers 1st–3rd oscillating Hollow rollers for ink roller temperature control system R-matic_D remote ON/OFF Technotrans alpha.c chiller with alcohol density control Photo-type delivery pile lowering sensor Delivery fan antistatic eliminator PPC Server III for CIP-4 file transfer Press information display LithoFlash® Inline RMGT 970 Recto Verso automatic inline measurement system LithoFlash software package: LithoDyn ADR, LithoDyn JobChange, LithoFlash OneShot Machine raised by 200 mm The machine has CE marking, safety covers, tools, and documentation in English. The machine is sold in its current condition and at its current location — “as is, where is”. Inspection is possible by prior arrangement. An excellent solution for printing companies requiring a modern, high-performance 8-colour offset press with 8/0 and 4/4 printing capability and advanced process automation.

Condition: good (used), Year of construction: 2010, conveyor belt length: 900 mm, conveyor belt width: 1,300 mm, Length: 900 mm Width: 1300 mm Csdjzd T Iaopfx Abtohb

Condition: used, Year of construction: 2007, Format: 360 x 360 mm Codsy Dufpopfx Abtshb Equipment: mobile envelope feeder format from 100 x 100 mm to 360 x 360 mm speed 15000 per/hours senor controlled for automatic speed adjustmend

Condition: used, functionality: fully functional, machine/vehicle number: A60200305, Year of construction: 2013, operating hours: 32,530 h, load capacity: 8,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: simplex, construction height: 4,050 mm, fork length: 1,800 mm, empty load weight: 10,200 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: A60200305 Fork width: 250 mm Fork thickness: 80 mm Mast type: Standard Technical condition: good Front tire type: Superelastic Front tire size: 8.25-15 Chsdozw R Epepfx Abteb Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 8.25-15 Rear tire condition: 0 - 20% Battery voltage: 80V Battery capacity: 1680Ah Battery year of manufacture: 2019 Description: good running condition Side shift, fork positioner Front work lights, full cabin