Used Iijima (Japan) Efc-1600 for sale (2,728)

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Prodpfxsv Nzpge Alweb Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min Prjdpjx Ndu Dofx Alwob --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Year of construction: 2022, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: OWD/492/2022, Equipment: CE marking, For sale is a used Metal Technika OWD-1600 4m optimizer with very low operating hours, approximately 2500 hours. The machine is connected and ready for trials and tests. Net price. TECHNICAL SPECIFICATIONS Performance Prjdpfx Aszdf Tpolwjb From 3,200 to 8,250 m/8 hours. Electronics: Controller with a color touchscreen display "MITSHUBISHI". Functions - Full optimization of 30 dimensions in two quality classes, - Creation of cutting programs for different customers, - Cutting at the marked location using a fluorescent pencil, - Trimming the margin (beginning and end of the input material) - Cutting in batches (several pieces at once) - Meters counters: total, change, operator, monthly, - Cutting accuracy ±0.3 mm. Engine: 7.5 KW (saw Ø500 – 140 teeth) Width of input material 12 - 250 mm max. width/height (250 / 50 mm) Height of input material 12 - 120 mm max. height/width (120 / 120 mm) Length of input material up to 4,200 mm. Lubrication: Oil-based central lubrication system. Output automation Connection for a conveyor belt and a sorting table.

Condition: excellent (used), functionality: fully functional, Maximum material height: 80 mm Table dimensions: 2000 x 1000 mm Prsdpfxezxpwye Alwjb Arm clearance: 1600 mm Motor power: 0.75 kW

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, saw drive: 380 W, PRIMULTINII SIF 1600 band saw, in very good working condition. Pedpfsyha A Tjx Alwerb

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Podpfxev Nv Taj Alwsrb Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Pedpfx Aszq Tzajlwerb Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Year of construction: 2001, condition: excellent (used), functionality: fully functional, CNC mandrel bending machine including O-ring assembly Fully automatic, high-precision production cell for the series production of pipework systems (e.g. brake, fuel or hydraulic lines), including a robot, feeding system, dual O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology sectors. Technical data 1. CNC mandrel bending machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Podpezz Hmqjfx Alwerb Year of manufacture: 2001 Control system: Multi-axis CNC control with operator panel Special features: Collet head movable in X / Y / Z, equipped with 3 bending planes for highly complex three-dimensional shapes without tool changes. 2. Loading and unloading robot Manufacturer: Motoman (Yaskawa) Model: ERCS-UP6-A00 Year of manufacture: 2000 Robot control: XRC including original teach-in terminal (handheld control unit) 3. Automatic O-ring assembly stations Manufacturer: ASM HASEMO GmbH Type: MOSA-800 / MOSA-1100 Year of manufacture: 2010 (high-quality upgrade/retrofit) Function: 2 O-ring assembly stations including a complete bulk material feed system (vibration hoppers/spiral conveyors) for twist-free and gentle external assembly of sealing rings. 4. Quality assurance & peripherals Measuring computer / leak tester: Innomatec, type: LT-C602 (for direct in-line testing) Blow-off station: Integrated for cleaning

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Psdpfx Alozr Ha Eowjrb Year of manufacture: 2007

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on time: 12,577 hours Laser on time: 68,745 hours including Sheetmaster Prsdpsznir Ajfx Alwsb

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 Predpezqhgdjfx Alwsb * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: like new (used), Year of construction: 2023, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 20240104, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Heidenhein iTNC 640, spindle speed (max.): 10,000 rpm, For sale is a vertical machining center with only 2,509 program running hours (as of September 15, 2026)! The machine is in first-hand condition and was assembled directly by the manufacturer! Inspections or test machining are possible at any time by arrangement. TECHNICAL DETAILS Travel in X-axis: 1,600 mm Travel in Y-axis: 800 mm Travel in Z-axis: 800 mm Rapid traverse rate X-axis: 32 m/min Rapid traverse rate Y-axis: 32 m/min Rapid traverse rate Z-axis: 32 m/min Predez Arkkepfx Alweb Table length: 1,700 mm Table width: 800 mm Workpiece length max.: 1,700 mm Workpiece width max.: 800 mm Workpiece height max.: 800 mm Workpiece weight max.: 1,500 kg Number of spindles: 1 Spindle speed: 1 – 10,000 rpm Speed control: stepless Spindle motor power: 37 kW Tool holder: SK 40 Mounting diameter: 40 mm Torque: 235.5 Nm Air through the spindle: available Tool magazine positions: 60 Tool changer: operable from the front MACHINE DETAILS Control: Heidenhain iTNC 640 Internal cooling: 20 bar Filter unit: band filter unit Input voltage: 380 V Input current type: three-phase Program running hours: 2,509 h (as of September 15, 2026, machine is currently still in operation) Dimensions & Weight Dimensions (L x W x H): 5,800 x 4,300 x 3,000 mm Machine weight: 15,000 kg EQUIPMENT CE marking Chip conveyor Documentation/Manual Glass scales in all 3 axes Hexagon 3D infrared probing system Mobile electronic handwheel Internal cooling with 20 bar and band filter unit Air through the spindle Tool changer with 60 positions, operable from the front

Condition: like new (used), Year of construction: 2020, functionality: fully functional, overall weight: 250 kg, load capacity: 10 kg, arm reach: 1,450 mm, controller manufacturer: ABB, controller model: IRC5 Compact, teach pendant manufacturer: ABB, teach pendant model: DSQC 679, input voltage: 230 V, input current: 5 A, type of input current: AC, Equipment: documentation/manual, Based on the data you provided, the standard description in Hungarian is as follows: ABB IRB 1600-10/1.45 industrial robot with IRC5 Compact controller and ABB FlexPendant. The robot is unused and has 0 operating hours. Robot: Manufacturer: ABB Model: IRB 1600 Robot variant: IRB 1600-10/1.45 Protection: Foundry Plus Payload: 10 kg Reach: 1,450 mm 6-axis industrial robot Year of manufacture: 2020 Manufacturing date: 28.02.2020 Serial No.: 1600-517625 Robot weight: 250 kg Controller: ABB IRC5 Compact Manufacturing date: 27.02.2020 Supply voltage: 1 x 220/230 V Frequency: 50-60 Hz Rated current: 5 A Short-circuit rating: 6.5 kA Net weight: 30 kg Teach Pendant: ABB FlexPendant Model: DSQC 679 Article No.: 3HAC028357-001 Revision: 14 The robot is unused and has 0 operating hours. Located in Hungary. Further technical information, photos and documentation are available on request. If you have any questions or require further information, please send us a message or call us. Prsdpfjz D Tf Nox Alwob

Condition: used, Year of construction: 2007, KIWA JAPAN KH-45 Horizontal center 4 axes Fanuc 31i control Year 2007 XYZ -640 x 610 x 680 B-360 degrees Table 400 x400 Magazine 60 tools Podpfevnzgiox Alwjrb Taper BT40 Spindle 12000 rpm Spindle motor 22.4 kw Machine dimensions 4540 × 2400 x 2584 length width height Weight 9200 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,000 kg, input voltage: 400 V, SENTE Makina TFWSI-1600 HVAC machine, designed for the production of large-diameter ventilation ducts. Model: TFWSI-1600 Pipe diameter range: Ø100 – 1600 mm Material: galvanized steel, aluminum, other sheet metal Material thickness: approx. 0.4 – 1.0 mm (depending on the configuration) Production speed: up to approx. 50 m/min Cutting: pneumatic rotary knife Control: PLC with touchscreen panel Prjdez D Ippjpfx Alwjb Power supply: 3-phase Year 2023, as new condition.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Podpfx Aszzvf Aelwjrb Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 5,650 mm, total width: 1,600 mm, total height: 2,520 mm, overall weight: 1,500 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, vertical glass wasching machine 1600 mm OPEN TOP working direction : from LEFT to RIGHT min. glass size : 350 x H100 mm max. glass weight : 200 Kg in- en outlet conveyor size : 2000 mm working height : 550 mm glass thikness : 3 - 15 mm number of brushes : 4 brushes diameter : 120 mm speed : 0,5 - 5 m/min . total power : 7 kw Pedoz Dt Rfjpfx Alwerb machine body in stainless steel

Condition: refurbished (used), Year of construction: 2005, laser type: CO₂ laser, laser power: 100 W, working length: 1,330 mm, working width: 1,630 mm, TECHNICAL DETAILS Working area (L × W): 1,330 × 1,630 mm Laser power: 100 W Laser source: CO₂ Maximum material width: 1,575 mm Material pass-through: 15–50 mm (without material support) Speed: 1 – 1,414 mm/s Maximum acceleration: 14.1 m/s² MACHINE DETAILS Suitable for: Films, acrylic, wood, and textiles Dimensions (L × W × H): 2,730 × 2,450 × 1,590 mm EQUIPMENT Prodpfx Alsz D E Ddewob i-cut Production Console software package

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005, Sollich Turbotemper® TE 1600 D, manufactured in 2021, is a chocolate, fat mass, and spread tempering machine. Tempering capacity ≥1,350 kg/h, actual max. consumption in previous operation approx. 1,200 kg/h. Operating process in three stages: Stage 1 – Heating stage to recrystallize the mass to approx. 45 °C, with a separate hot water circulation circuit, mass temperature-dependent control, and a water circulation pump with electric heating. The circuit also has a cooling function, so mass inlet temperatures above 45 °C can be compensated. Stage 2 – Cooling and crystallization zone, guaranteeing a constant crystal quantity regardless of the mass flow rate. Large cooling surfaces and precise temperature control; specially shaped shearing and mixing tools create a high shear gradient and accelerate the formation of microcrystalline, stable beta crystals. Stage 3 – Mixing zone for homogeneous distribution of the beta seed crystals. The mixing stage can also be operated as a cooling stage for lower starting temperatures or higher throughput at the same starting temperature. Equipment and features: • First-in/First-out principle, dwell time of all mass particles is the same • Siemens PLC with TP 900 (9") touch panel, parameters for up to 40 masses can be stored as retrievable programs • Reinforced drive with measurement of the power consumption, including visualization in the HMI. • Turbulent water flow, separate circulation pump for each stage, automatic power control • Two additional water control circuits in the frame: for heating the mass line to the mixing unit and the mass return line to the tank, as well as the line between the tank and the tempering machine, including operation via HMI. • Thermal start-up protection to prevent the machine from starting if it has not heated up sufficiently • Digital display of the mass inlet temperature, separate PT-100 sensor for the feed line • Safety pressure switch with digital pressure display, shuts off the feed pump in case of overpressure • Preset programs "Tempering" and "Night" with automatic adjustment of all heating and cooling circuits. Included in the scope of delivery: Feed pump type SPN 1500 (2"), machine no. 35120010, frequency-controlled via the tempering machine's control. Bypass pump type SPN 1000 (2"), machine no. 35120015, frequency-controlled, operated via HMI. Connection: Cooling water 5–10 °C, customer-side, 2–4 bar, minimum differential pressure supply/return 1 bar; 400 V, 3 Ph, 50 Hz + neutral + earth. Dimensions according to manufacturer's drawing A 17555-2, available. Condition, history and handling: Manufactured in 2021, delivery and commissioning by Sollich in week 40/2021, approx. 180 operating hours. Used exclusively for palm oil-free spreads, stored dry in Wuppertal since the end of 2024, inspection by arrangement. Documentation, operating manual and conformity documents are available. Purchase value in 2021 according to order confirmation: €121,320 for the unit including the specified pumps and water control circuits. Sale from commercial to commercial, excluding any warranty, technical specifications according to manufacturer's documentation, subject to change. This tempering machine is also available as part of a complete tempering and mixing system (including nut mixing unit NM 200 VA and cooling unit), see advertisement ID A22725782. Podpfezzvgtsx Alworb

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, ABB Robotics IRB 1600-8/1.45 IRC5 M2004 robot, complete Controller: IRC5 M2004 Number of axes: 6 Max. payload: 8 kg Max. working range: 1450 mm Year of manufacture: 2008 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. Prsdpfx Aozm Evnelwob The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify the delivery address.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Pjdpfxoywnr Ne Alwerb Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Pjdem E I D Hopfx Alwjrb Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: like new (used), Year of construction: 2014, ROBOT BRAND: ABB MODEL: IRB 1600-6/1.45 TECHNICAL DESCRIPTION PAYLOAD: 6 KG MAXIMUM REACH: 1450 MM YEAR OF MANUFACTURE: 2014 CONTROLLER: IRC 5 SOFTWARE: 6 Prsdpez Erdyofx Alwob WELDING EQUIPMENT FRONIUS TPS 4000 WITH WATER COOLING 3-AXIS ABB IRBP R 300

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Psdpfxjz Duvvj Alwsrb Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: used, Year of construction: 2005, operating hours: 61,407 h, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from Arburg, model 470 C 1600-800. The pump and one circuit board have been removed from the machine; therefore, the machine is being sold as defective. Otherwise, it is in very good condition. Technical specifications: Pump operating hours: 61,400 Clamping force: 1600 kN Distance between tie bars: 470 x 470 Ejection stroke: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335 x 1635 x 1950 mm Predpfez Etu Hsx Alwjb Weight: 6950 kg The machine is offered without any peripherals. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices are plus VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling WE BUY / SELL PRODUCTION & METALWORKING MACHINES, AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.