Used Illig Ua 100 Ed for sale (27,905)

Condition: reconditioned (used), > Top heating with small individual heaters controlled by toggle switches > Bottom heating with large heater > Top clamping system > Protective grille > 4 cooling fans D05 Todpfxsfug Ans Aahjc > Pre-blowing and demolding automation

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Tjdpfx Aaotv Ivzohoc Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Condition: excellent (used), Year of construction: 2017, operating hours: 748 h, functionality: fully functional, machine/vehicle number: 5231847, type of input current: three-phase, total width: 3,988 mm, total length: 4,740 mm, total height: 3,440 mm, input voltage: 400 V, compressed air connection: 6 bar, overall weight: 2,700 kg, Sheet thermoforming machine Machine for processing semi-finished products Maximum sheet size: 1,000 x 700 mm Minimum sheet size: 300 x 210 mm Maximum sheet thickness: 12 mm Minimum sheet thickness: 0.5 mm Tjdpeznbp Tofx Aahec The machine is fully equipped and prepared for automatic feeding. Features upper and lower tool function, water-cooled molds. Intelligent control via pre-saved material parameters. The price includes a GEISS horizontal bandsaw HBS 1000.

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: Tsdpfx Aaewf Dvaehoc - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Tsdot Iracjpfx Aahoc Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table Tedpfjzx Ergex Aahjc 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges Todpfoyz Dhzox Aahsc - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter Tjdpfexlzrcox Aahec - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features - Top heater with 5-zone HTS control (700ºC) Tsdexlzqfjpfx Aahec - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation Tsdpfeft S Eajx Aahoc > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 034108905, BOBST 100 II - A2 folding and gluing machine, manufactured in 1999. This efficient machine is designed for the production of straight-line packaging and packaging with a crash-lock bottom, handling cardboard and corrugated board. It features 6 cold glue applicators and one hot glue applicator. It also has a wheel-fed glue system with a container. It glues at 6 points – with various glue application methods. It includes a cassette for gluing envelopes. The HHS system in this version is very good – it can be used to produce envelopes, Advent calendars, and boxes. The machine can be inspected at our printing facility in Szczecin. Tjdpfx Aaozwmvqshec

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Tjdey Anifjpfx Aahsc

Condition: excellent (used), Year of construction: 2006, Control Siemens Todpfxjz Hp Rgs Aahjc

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours: 2110 h Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Tedjxlchfopfx Aahoc Training

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal Tjdpfx Aajzucxcjhoc The machine is sold with the table shown in the pictures.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Tedpezxt Snsfx Aahsc Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: used, Year of construction: 1957, Press force: 100 tons Stroke: 30 - 160 mm Strokes per minute: 40/min Throat depth: 315 mm Passage between frame walls: 400 mm Tjdpozymurefx Aahsc Shut height (max. stroke, adjustment up): 460 mm Table area: 910 x 680 mm Table opening: 400 mm Table height above floor: 800 mm Ram area: 630 x 400 mm

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Tjdjzizlqepfx Aahjc Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: good (used), • Model – FMF 100 Tsdpfx Aasuqma Aehsc • Double-sided drilling machine • Min. diameter: 3 mm • Max. diameter: 300 mm • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Tedpfoyiflmsx Aahjc

Condition: used, Year of construction: 1990, From the Gütersloh site we offer a well-maintained eccentric press Pressure 100 t Displacement 330 mm Todpsyglzfofx Aahjc Hub 10-130 mm Speed 56 RPM Eccentric adjustment 80 mm Table surface 830x600 mm Piston face 250x130 mm Table height 870 mm Taper hole in the piston 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

Condition: like new (used), Year of construction: 2019, operating hours: 2,600 h, KR210 R3100 Ultra KRC4 Working, tested only 2600 h Maximum reach 3095 mm Rated load 210 kg Column rated additional load / swingarm/arm 0 kg / 0 kg / 50 kg Rated total load 260 kg Position repeat accuracy (ISO 9283) ± 0.06 mm Number of axles 6 Installation type Floor Tsdpfjpivmcjx Aahec Installation area 830 mm x 830 mm Weight approx. 1154 kg

Condition: used, Year of construction: 1990, The Adolf Illig SB 53C - DIN is a used skin and blister packaging machine (universal vacuum thermoforming machine). It was developed for the economical production of transparent blister packaging and for the direct skin packaging of products onto cardboard backing cards. The used skin and blister packaging machine was installed at a university and used exclusively for teaching purposes. Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Technical doc.: Yes Condition: Second hand Price: By request Power consumption & electrical system: Heating capacity: 4.5 kW (provided by 15 ceramic surface heaters for uniform heating) Drive motor power: 1.24 kW Vacuum system: Maximum vacuum level of 0.95 kp/cm² (frequently operated with Busch vacuum pumps) Air consumption: Approx. 30 litres per working cycle. Film roll holders: Film roll diameter for Blister packaging: Max. 400 mm Film roll diameter for Skin packaging: Max. 350 mm Film roll core diameter: 70 mm. Format ranges & capacities: Maximum forming area: 405 × 500 mm Packaging / cardboard size: 400 × 495 mm Tjdpfx Aasxm Sa Hehsc Maximum draw depth: 100 to 150 mm (both positive and negative forming possible) Maximum packaging height: 150 mm Film width: 445 mm. Dimensions and weight: Machine dimensions: Approx. length 1.600 mm × width 1.135 mm × height 2.710 mm Empty weight: Approx. 500 kg.

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Tjdpfx Aaju Rartohoc Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Table size: 1400 x 600 mm Maximum table load: 1000 kg Controller: Fanuc 18i-M ATC: 30 X-axis: 1070 mm Y-axis: 610 mm Z-axis: 610 mm Cutting feed rate: 10-10000 mm/min Rapid traverse rate: 20/20/15 m/min Spindle taper: BT 40 Spindle speed: RPM 50-12000 Tjdpfxoztbuyj Aahjc Transport dimensions: L=3200mm, W=3000mm, H=2700mm Machine weight: 8200 kg Chip conveyor: L=5000mm, H=1400mm Internal cooling Water tank: L=2400mm, H=1200mm