Used Infors Ht for sale (1,740)

Condition: used, Fully functional Infors shakers (2 units available). Both machines are equipped with a cooling system, though it is not operational – we did not require it. The machines have been upgraded with advanced control systems, featuring a touch panel with sophisticated automation. Adhesive mats are attached inside both Infors units. Ljdpfxsxvlkqj An Iohi Price is per unit. Specifications: Operating temperature range: 10–40°C Platform motion range: 60–250 rpm Max. program duration: 1000 h Height of a single chamber: 350 mm Platform size (WxL): 840x440 mm Dimensions (WxLxH): 1250x870x1990 mm

Condition: used, This listing is for the Infors HT Multitron Shaker The unit is in full working condition and ready for immediate use Advanced incubator shaker designed for reliable and uniform mixing with precise temperature and humidity control. Ideal for research and biotech labs requiring consistent results in cell culture and fermentation processes. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Ledpeyywp Nsfx An Iehi • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, Year of construction: 2026, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies Lodpfxsu Hz Tqo An Ijhi + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: excellent (used), Heraeus Vötsch HT 4002 Temperature Testing Chamber -40 to +130 °C Manufacturer: Heraeus Industrietechnik Type according to nameplate: HT 4002 Designation on the front of the device: VT 4002 Machine type: Temperature testing chamber / Tabletop testing chamber Test chamber volume: 16 liters For sale is a used Heraeus Vötsch HT 4002 temperature testing chamber with a programmable CTC-E4 controller. This compact, air-cooled tabletop testing chamber is suitable for controlled temperature and temperature cycling tests on components, materials, and electronic components. Technical data: Temperature range: -40 °C to +130 °C Test chamber volume: 16 liters Heating rate: approx. 5.0 K/min Cooling rate: approx. 3.5 K/min Programmable temperature cycling: -40 °C to +130 °C Cooling system: air-cooled Electrical data: Supply voltage: 230 V, +6/-10 %, 1/N, 50 Hz Rated current: 4 A Rated power: 0.7 kW Refrigeration system: Refrigerant according to nameplate: R22 Refrigerant quantity: 0.4 kg Maximum permissible operating overpressure: 23 bar Controller: Heraeus Vötsch CTC-E4 temperature controller Digital setpoint and function display Programmable temperature profiles Display for heating and cooling operation Fault indicator Interfaces and connections: RS-232 interface RS-485/RS-422 network interfaces Digital I/O connection Connection for external Pt100 temperature sensor Potential-free contact Connection for external control panel Dimensions: External dimensions (W × D × H): approx. 465 × 505 × 625 mm Internal dimensions (W × D × H): approx. 310 × 230 × 205 mm Weight: approx. 75 kg Equipment: Air-cooled refrigeration system Programmable CTC-E4 controller Stainless steel test chamber Observation window in the door Side test chamber feed-through Test chamber lighting Door latch Main switch Multiple communication interfaces Application areas: Temperature tests Lhjdpfx Anoznir No Iji Temperature cycling tests Electronics and component testing Material testing Quality assurance Research and development Laboratory and industry Shipping data: Shipping dimensions (W × D × H): approx. 465 × 505 × 625 mm Shipping weight: approx. 75 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Scope of delivery: Heraeus Vötsch HT 4002 temperature testing chamber Accessories as shown in the pictures Shipping possible by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Year of construction: 2022, condition: used, Second-hand goods Year of manufacture: 2022 Features and technical specifications: - Enables one person to effortlessly load panels onto the platform frame and swivel it from the vertical to the horizontal position - For use with panel or sheet cutting saws, on a shelf or whilst moving between workstations Swivel frame with two-position locking mechanism in vertical and horizontal positions - Adjustment of the table to the desired working height via a foot-operated hydraulic system The design principle, featuring a smooth-running scissor mechanism, ensures that the platform can be raised and lowered in a perfectly parallel manner - Sturdy support rollers on the lower support and several all-round castors ensure smooth, ergonomic movement - Counterweight on the lower frame for a secure footing and maximum stability when moving the table - The foot pedal for the workstation table is fully accessible - Easy to manoeuvre thanks to four swivel castors with a diameter of 125 mm - Two castors fitted with brakes - The swivel frame can be fitted to and removed from the platform base frame in just a few simple steps - Complies with the safety criteria of EN 1570-1 - Load capacity: 300 kg - Table height: max. 1010 mm - Table height: min. 400 mm - Swivel frame width 1800 mm, length 1500 mm - Castor diameter 125 mm - Dimensions 1200 x 740 x 400 mm - Weight approx. 80 kg - Swivel frame weight: 10 kg Availability: at short notice Storage location: 63934 Röllbach Lhsdpfxezk Nqdj An Ioi

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: Electro-hydraulic drive Lodpfx Aezk Nkden Ishi Vertical press cylinders: 3 Vertical cylinder stroke: approx. 130 mm Vertical cylinders adjustable via a perforated grid Horizontal press cylinders: 2 Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Medium-pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The information provided is subject to change until the machine arrives at our warehouse. Availability: at short notice Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment Special drilling machine for stair construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily achieved thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowelling on two levels without readjustment The desired drilling heights can be set for each drilling level with a handwheel and digital counter; switching is then done pneumatically from the front Crossfeed approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been repaired, very good condition, see original photos A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Lhodpfxeyfta Te An Ioi Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Lhodpfx Aezil R Rsn Iji Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Year of construction: 2024, condition: used, machine/vehicle number: 2333470, Thermal reactor Lodpfx Ansziltrs Ishi

Condition: used, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Key Features: - Usage: Solo (offline) - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic - Cutting Process: Knife works in two directions for damage-free cuts - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm Lhsdoycfvnjpfx An Iei - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: new, SCM Olimpic 500 HT - Automatic edge banding machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control console (control panel) - Human-machine interface (HMI) software "Maestro active edge" - Fine trimming and radius cutter head, radius = 1 mm - Fine trimming and radius cutter head, radius = 2 mm - Electronic positioning of the upper pressure bar - Spacers on the infeed guide rail - "SAVENERGY" kit - Interior lighting of the machine housing and the edge banding area - "Nesting" contact rollers - "AAR" 1 release agent spray unit - Spray unit for final finishing of the edge - Spray unit for sensitive edges - Joining unit "RT-V1" - "EASY SIZE" device - Gluing unit "VC-VM" - Ceramic lamp with infrared radiation - Electronic positioning of the pressure rollers Lsdezgf Idjpfx An Iehi - Trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, 3 automatic positions straight/R/R, for "Round 2-A" - Radius cutter head "RAS-HP Multiedge 2R" - Planing cutter "RC-N" - Buffing unit "SP-V" Machine is new and still in its original packaging. Commissioning possible in Germany and Austria. Currently, a subsidy of 15% is possible in Germany; we will be happy to assist you with this. Special offer machine at a special price.

Condition: good (used), Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation -Dimensions: 1600/330/H470 mm -Weight: 356 kg Lhjdpfx Aned Dzlmo Iei

Condition: used, functionality: fully functional, power: 183 kW (248.81 HP), fuel type: diesel, color: yellow, overall weight: 21,000 kg, number of seats: 1, Year of construction: 2019, operating hours: 6,900 h, machine/vehicle number: 2497978, Equipment: additional headlights, air conditioning, all wheel drive, cabin, Year of manufacture: 2019 Operating hours: 6,900 hrs Weight: 21.0 t Payload: approx. 5.0 t Tires: 20.5R25 Standard bucket Engine displacement: 6.7 l Lifting force: 147 kN Travel speed: 40 km/h Steering type: articulated Lodpfx Aszlczfsn Ijhi Overall dimensions (L x W x H): 8.49 m x 2.60 m x 3.72 m Outside turning radius: 6.02 m Engine: Cummins, 183 hp Fully functional Technically inspected General signs of wear Delivery possible (optional) Rental possible (optional)

Condition: new, maximum load weight: 1,538 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,650 mm, loading space height: 300 mm, total width: 1,713 mm, total height: 1,060 mm, Year of construction: 2026, Humbaur HT 203116 Tandem Trailer Further models, sizes, and versions are available or can be ordered and configured individually according to your requirements. Please do not hesitate to contact us – we will be happy to provide you with personal advice! Price: €3100 including 19% VAT, including delivery costs and vehicle documents! Description: Everything a professional needs: A sturdy platform trailer with a fully hot-dip galvanized frame and chassis. All important components, such as the longitudinal beams or the underrun protection, are also protected against corrosion, and the drawbar can be easily replaced if damage occurs during demanding daily work. Recessed lashing rings secure the load. Lhedpszbt Ezofx An Ioi Each individual ring can withstand a tensile force of up to 400 kg, as certified by Dekra. The robust side panels are made of anodized aluminum with recessed fasteners and, like the hot-dip galvanized corner posts, are completely removable. Technical data: Trailer type - Two-axle * Design - Aluminum * Weight - 462 kg * Gross vehicle weight - 2,000 kg * Payload - 1,538 kg * Internal length - 3,100 mm * Overall length - 4,514 mm * Internal width - 1,650 mm * Overall width - 1,713 mm * Internal height - 300 mm * Overall height - 1,060 mm * Loading height - 720 mm * Tire size - 13 inches Standard equipment: V-shaped drawbar, hot-dip galvanized * 13-pin plug and reversing light * Floor panel, 18 mm thick * Side panels made of anodized aluminum with recessed fasteners, completely removable * Lashing rings integrated into the V-shaped outer frame profile, tensile force 400 kg per lashing ring, Dekra certified * Support wheel

Condition: used, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Key Features: - Usage: Solo (offline) Lhodpfx Aoyctybjn Isi - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic - Cutting Process: Knife works in two directions for damage-free cuts - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), AdBlue Refueling Vehicle Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle workshops: the MOBILUS AdBlue system allows for safe and economically efficient refueling of your vehicles. The mobile refueling system MOBILUS AdBlue complies with all relevant technical and legal regulations and is therefore also used in research and development projects. Convince yourself of the quality of this mobile urea refueling unit. Technical data: Manufacturer: Rietbergwerke GmbH & Co. KG Type: HT-Mobilus 200 AdBlue Year of manufacture: 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135 cm Empty weight: approx. 260 kg Usable volume of the tank: approx. 175 liters Power supply: Connected load: 3.0 kW Connection voltage: 400/230 V / 50 Hz NPE Fuse rating: 16 A Heater: Connected load: 4.0 kW Connection voltage: 400 V Delivery pump: Power: 0.75 kW Supply voltage: 400 V / 50 Hz Additional technical data: Suction and circulation pump: Power: 0.4 kW Supply voltage: 230 V / 50 Hz Dispensing valve: Flow rate: max. 40 l/min Operating pressure: 0.5 – 3.5 bar Control range: Flow rate: 3.5 l/min. – 45.0 l/min Temperature: 15 °C – 45 °C Frequency converter: 1,800 1/min BNC sockets: Output: 0 – 10 V Temperatures: Operating temperature: max. 45 °C Storage temperature: up to -30 °C Materials: Tank: LDPE all other parts in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Lhedpfjzgcl Hjx An Ioi Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Year of construction: 2020, operating hours: 250 h, condition: used, lifting height: 5,000 mm, free lift: 1,250 mm, mast type: triplex, construction height: 2,950 mm, fork length: 2,400 mm, fork carriage width: 2,050 mm, drive type: Elektro, load capacity: 12,000 kg, Heavy-duty forklift truck - electric Load center: 600 Fork width: 200 mm Fork thickness: 70 mm ISO Class: Pin-Type Mast type: Triplex Condition: As good as new Technical condition: Very good Front tires Type: Non Marking Front tires Size: 9.00 - 20 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 355 / 65 - 15 Rear tires Condition: 80 - 100% Battery Volt: 96V Battery Ah: 1550Ah Battery Manufacturer: TAB Battery type: PzS Ljdjt Dfa Uspfx An Ijhi Battery year of construction: 2020 Battery condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, Full cab with heating complete lighting system

Condition: ready for operation (used), A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible. Lhodpfx Anozka I Te Iei

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 160 kg, 100 kVA Seam Welding Machine for Sheet Metal Fabrication A powerful resistance seam welder for producing continuous, gas-tight welds on stainless and low-carbon steel sheets. Suitable for HVAC ductwork, tanks, containers, drums, and general sheet metal applications. Available in horizontal and vertical configurations; the welding speed is infinitely adjustable, and the water-cooled electrode system supports a 50% duty cycle in production use. Technical data: Rated capacity: 100 kVA Welding capacity, stainless steel: 1.0 + 1.0 mm Welding capacity, low-carbon steel: 1.2 + 1.2 mm Electrode arm length (throat depth): 400 mm Electrode stroke: 120 mm Welding speed: 0 – 2 m/min (continuously adjustable) Duty cycle: 50% Cooling: water-cooled, flow rate 15 l/min Input voltage: 380 V, 50 Hz Dimensions (L × W × H): horizontal 1.3 × 0.7 × 1.9 m / vertical 1.3 × 0.8 × 1.9 m Lhjdpfx Aoymc Szon Ioi Weight: horizontal 500 kg / vertical 550 kg

Condition: excellent (used), Here, we offer a shock test chamber. Water-cooled temperature shock test chamber Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -65°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg Lhsdpfszd R Uwsx An Iei For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Type: HT 7012 S2 Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Heraeus Shock Test Chamber We offer a shock test chamber here. Temperature shock test cabinet, water-cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 11 K/min Cold chamber: The temperature control of the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber +50°C to +220°C Lhodpfxjzd R Aze An Ioi Temperature range, cold chamber -80°C to +70°C Test chamber dimensions: width 470mm, depth 650mm, height 410mm External dimensions: width 930mm, depth 2115mm, height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Type: HT 7012 S2 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2008, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Key Features: - Usage: Solo (offline) - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic - Cutting Process: Knife works in two directions for damage-free cuts - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Ljdpfxezcv D Aj An Iohi Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2009, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Key Features: - Usage: Solo (offline) Lhsdpszcv A Eofx An Iji - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic - Cutting Process: Knife works in two directions for damage-free cuts - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2019, condition: used, Year: 2019 Condition: very good, functional Counter reading: 2.5 million Parts Included: - new lower knife - 1 pc - new upper knife - 1 pc - Upper knife used in the cartridge - 3 pcs - Knife assembly in the cutter - 1 time - Lower cutting mold - 2 pcs - Upper pressure mold - 3 pcs. - Cardboard preparations for the upper hoof Technical specification: Lhsdpfx Aneyh Nnio Iji - max. untrimmed book size - 330 x 330 mm - min. untrimmed book size - 145 x 105 mm - max. trimmed book size 300 x 300 mm- - min. trimmed book size - 139 x 99 mm - standard size trimmed - A5 / A4 - trim height - 1 – 51 mm - pressure - 4 kN – 8 kN Description: The HT-80 trimmer is very stable and can be used as a separate device, or integrated into a system solution with machines such as BQ-500, BQ-470, SB-07 or SB-09/s. The machine has a very short response and extremely easy operation thanks to the color touch screen. The HT-80 processes a wide range of formats and always clean and precise cuts

Condition: excellent (used), Year of construction: 2013, HORIZON HT-30C, three-knife trimmer, used The Horizon HT-30C is an extremely robust, automatic three-sided trimmer that has earned its place among the most popular book finishing machines due to its exceptional reliability – a quality guarantee that often results in quick sales due to high demand. Key features: - Operation: Solo (offline) Lhsdpfxjzdqfis An Isi - Ease of use: Simple operation with easy setting adjustments via the touchscreen - The Horizon HT-30C trims books fully automatically, so the operator does not need to be constantly present. After the books are loaded, the HT-30C signals when unloading and reloading are required after trimming - Memory function: 40 memory locations for recurring jobs - Operation: Stacking and trimming up to 10 copies simultaneously, fully automatically - Durable construction: The HT-30 is solidly built and designed for a long service life Specifications: - Uncut book size: Maximum: 320 x 235 x 51 mm; Minimum: 152 x 136 x 1 mm - Trimmed book size: Maximum: 305 x 230 x 51 mm; Minimum: 148 x 134 x 1 mm - Trimming area: Maximum: 99 mm; Minimum: 2 mm - Pre-stack depth: 300 mm - Speed: Maximum 520 books per hour - Pressure: Maximum 8 kN - Noise level: Maximum 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg