Used Innometrik 3D Cnc Cmm (Tactile) for sale (10,188)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Nodpfedyah Sex Airelh Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate serving as a measuring table, with a guide system attached to the side, which allows for open loading from three sides. Technical Key Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary/swivel head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 μm + (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unrestricted Accessibility: Due to the side-mounted guide of the horizontal arm, the measuring table is freely accessible, which facilitates the loading of heavy workpieces by crane or forklift. Multisensor Technology: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request! Nljdpfszz Hywjx Airjh

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Nlodpfx Asdyl H Neireh Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,600 mm, travel distance Y-axis: 2,400 mm, travel distance Z-axis: 1,000 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis ZEISS ACCURA 16/24/10 3D CMM was manufactured in 2022. It features a measuring range of 1,600 mm in the X-axis, 2,400 mm in the Y-axis, and 1,000 mm in the Z-axis, with a maximum workpiece weight capacity of 4,000 kg. Equipped with the ZEISS VAST Scanning Head, it offers high-speed data acquisition and sub-micron accuracy. If you are looking to get high-quality measurement capabilities, consider the ZEISS ACCURA 16/24/10 machine we have for sale. Contact us for further details. Nlsds Ad Nxrspfx Airoh • Maximum workpiece weight: 4,000 kg • Equipped with: ZEISS VAST scanning head • Sensor capability: Active scanning for high-speed data acquisition; sub-micron accuracy for complex geometries, bores, and deep features • Service/Certification: Maintained and calibrated annually by original ZEISS service technicians; accuracy documented and certified to international standards

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Nledpfjd Ambtex Airjh Passive vibration isolation pads Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Nljdozxpkmepfx Airoh

Year of construction: 2005, condition: used, Measuring Machine Nodoz Hqknspfx Airelh Manufacturer: EROWA Type: PRESET 3D CNC Year of manufacture: 2005 Technical details: Measuring range X-axis: 650 mm Measuring range Y-axis: 700 mm Measuring range Z-axis: 500 mm Usable surface of the granite plate: 819 x 1,330 mm Max. workpiece weight: 650 kg Machine weight (approx.): 775 kg Machine dimensions (approx.): 1,380 x 1,160 x 2,429 mm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, overall weight: 579 kg, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, Mitutoyo QVT1-X404P1L-D 3D CNC Multisensor Measuring Machine Enhanced application possibilities through the combination of tactile and non-contact measurement. Powerful CNC-controlled system for intelligent, simple, and fully automatic measurements. Multiple image processing filter functions ensure reliable results. Flexible switching of probe tip configurations with the MCR20 probe head changer. White LED transmitted light. White LED coaxial light. Programmable 4-quadrant LED ring light. Triangular pattern focusing for low-contrast surfaces. Programmable magnification changer with 1x, 2x, and 6x magnification. High-resolution CCD black and white camera. Resolution: 0.0001 mm "One-Click Tool" technology for optimal edge detection. Nledpfe Afdr Aex Airjh

Condition: ready for operation (used), Year of construction: 2013, A 3D CNC coordinate measuring machine in need of repair is offered for sale. Max. measuring range X/Y/Z: 400mm/400mm/300mm, measuring principle: hybrid (optical/tactile), optical system: CCD camera with motorized zoom optics, focusing method: contrast autofocus, max. accuracy: 1.5µm (MPE), guideways: mechanical precision guideways, base structure: granite construction, control: CNC in all 3 axes, software: WinWerth®. The Z-axis no longer moves. An on-site inspection is possible. Nedpfx Aoztrbdjirelh

Condition: used, Year of construction: 2021, X-axis: 300mm, Y-axis: 200mm, Z-axis: 200mm, max. table load: 20kg, temperature gradient: 2K/h, relative humidity: 40-70%, length: 750mm, width: 737mm, height: 1664mm, weight: 260kg, operating hours: approx. 100h, with documentation, regularly serviced and inspected by the manufacturer. An on-site inspection is possible. Nedpfx Aszyq Szeirelh

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and variable machine table. Nlsdpfxowfdm Eo Airoh

Condition: good (used), Year of construction: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D Coordinate Measuring Machine Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision ball guides on all axes Illumination: Transmitted light, bright field and dark field reflected light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black-and-white camera Electrical connection: 230 V AC, 50 Hz Current consumption: max. 10 A Power: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Including (not limited to): 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC Control panel Probes Fiber optic and reference standard sets Nsdpfxoxfluuo Airolh Exact scope of delivery according to photo documentation The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile metrology. With a measuring range of 400 x 200 x 250 mm, it offers versatile application options for quality assurance of a wide variety of components. The combination of high-resolution CCD black-and-white camera, powerful zoom optics and LED lighting ensures precise image capture and reliable results. Precision ball guides and servo drives guarantee high repeatability. The device comes with extensive accessories and is ideally suited for precise 3D measuring tasks in industrial and manufacturing environments. No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm Njdpfjwlqpysx Airelh - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Condition: good (used), measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 4,058 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,082 mm, total length: 1,054 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 515 kg, input voltage: 230 V, travel speed (max.): 25,800 mm/min, table load: 100 kg, compressed air connection: 5 bar, ambient temperature (max.): 26 °C, ambient temperature (min.): 16 °C, Equipment: type plate available, Mitutoyo Euro-C Apex544 CNC 3D CMM. P.S. For Dutch buyers looking for a CMM: Keep in mind that a measuring machine must always be professionally packaged, transported, and installed! These costs are NEVER mentioned by the sellers on this website. These costs usually range from €5,000 to even above €10,000! Please take this into account. Also, the operation (and especially the accuracy) is not guaranteed. An excellent 3D CNC CMM at a very attractive price. Three-dimensional measurement with accuracy within three micrometers! A fine-looking Mitutoyo Euro-C Apex544 3D Coordinate Measuring Machine. In very good condition. Fully meets specifications. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 4.0L/1000] µm (at a temperature of 16–26°C) Nlsdozz Rc Aspfx Airjh Resolution 0.0001 mm. CNC speed 430 mm/sec. Maximum acceleration 0.17 g Workpiece load capacity up to 100 kg Height 219 cm Width 109 cm Length 106 cm Air-bearing axes (5 bar supply) Operates on 230V power to the controller (the CMM itself runs on low voltage). Euro-C Apex544 (PH1 + TP20). Standard joystick. Desktop PC with Windows 11 Pro (English). 24-inch monitor. Mouse & keyboard. MCOSMOS v3.0 Upgrades available to: PH10T/M + PHC10-2. TP200 + PI200-2 SCR200 + 6 STD modules. MCOSMOS version of choice (subject to stock). Dual joystick. (On-site training within the Benelux region). Sales prices exclude: transport, installation, calibration, and measurement certificate. Can be viewed in operation/demonstrated in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration is not included, though it is available as an option).

Condition: used, Werth Werth Messtechnik Scope-Check 650×750×500/MB/Z – 3D CNC Coordinate Measuring Machine For sale is a high-quality 3D CNC coordinate measuring machine from the renowned company Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This machine is impressive due to its precision, reliability, and versatility in industrial metrology. Features & Properties: CNC-controlled 3D coordinate measuring machine Multi-sensor capable (optical and tactile measurements possible) Version with Moving-Bridge system (MB/Z) for high stability and flexibility High precision in measuring complex workpieces Robust design, intended for continuous industrial use Suitable for quality assurance, production monitoring, and development areas Additional equipment – Renishaw TP200 probe system The highly precise, tactile Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It enables quick probe tip changes and precise measurements with long probes. Key features: Strain gauge technology: Minimal deflections are registered with high accuracy – typical errors such as "lobing" are eliminated. High precision: Repeatability up to 0.4 µm, 2D probing uncertainty ±0.8 µm. Fast changeover: Automatic probe tip changeover with SCR200 changeover magazine, no recalibration required. Robust: Service life of the probe tip modules over 10 million probing operations. Flexibility: Standard (SF) and low-force modules (LF) for sensitive materials. Compatibility: Can be used with Renishaw PH10 probe heads and extensions up to 300 mm. Technical specifications (excerpt): Connection: M8 connector, Interface PI200 Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) Probing force XY: 0.02 N, Z: 0.07 N Overload force XY: up to 0.4 N, Z: up to 4.9 N Weight (sensor + module): 22 g Probe tips: M2 Technical data: Manufacturer: Werth Messtechnik Model: Scope-Check 650×750×500/MB/Z Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm Supply voltage: 115–230 V AC Power consumption: max. 10 A Weight: 1360 kg Scope of delivery: Werth Scope-Check 650×750×500/MB/Z Renishaw TP200 probe system incl. probe tip modules Accessories as shown in the attached pictures Important note: "The table shown in the photos is not included in the sale." Nsdpozii Dzofx Airjlh (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2010, functionality: limited functionality, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, Machines works fluently apart from sprocket- which blokes and reqiures fixing. Njdpfoz Ditvsx Airelh

Condition: used, Year of construction: 1998, Technical details: Nedpfxou N At Re Airolh x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Computer (Software Windows NT) Last calibration was at 06/2006. *

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Nedpfx Aisy Dcivsrolh Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm Nlsdszfv T Ispfx Airoh • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Wire diameter range: 2,0 - 6,0 mm Wire feeding length: unlimited Nsdpfxjz Imcvs Airjlh Bend-back clearance: max. 1.000 mm Weight: 4.000 Kg. complete with an motorized wire decoiler WAFIOS AHL 41

Condition: used, Mitutoyo 3D CNC measuring machine Manufacturer: Mitutoyo Model: BN706 Nsdjw Hda Iopfx Airjlh Code No. 3700M-312 Type: Coordinate measuring machine Granite measuring table Measuring range: X-axis: 700 mm Y-axis: 600 mm Z-axis: 600 mm Table size: 850 x 1200 mm Dimensions: (W x L x H) 1600 x 1800 x 2600 mm Weight approx. 2600 kg Not functionally tested More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 4 h, input frequency: 50 Hz, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, actuation type: electric, overall weight: 250 kg, Equipment: documentation/manual, We offer this like-new CNC-Technik ALM-1204-002 machining center, manufactured in 2022. Working area: 1,250 x 1,000 x 180 mm Country of origin: Germany Tangential unit preparation for the AL-M series Electronics upgrade with a 4th motor driver for controlling the tangential module or rotary axis Inductive tool length sensor AMB 1400 FME-P Technical specifications: Input power: 1,400 W Rotation speed: 5,000 ... 25,000 rpm Mounting to the portal: 43 mm mounting flange Collet: ER16 Weight: 1.80 kg Power connection: 4 m power cable Set of 3 ER-16 collets Collet dimensions: Vacuum table milled into the plate Grid spacing 20 mm Includes M6 threaded holes in the grid Nsdpfx Ajzfwavjirjlh Vacuum pump TOPAS E101 V 2.2 kW (set) Oil-lubricated rotary vane vacuum pump DS motor, 2.2 kW 230/400 V 50 Hz IE3 Motor version with PTC (standard) Nominal pumping capacity 100 m³/h Ultimate vacuum 0.5 mbar (abs.) without gas ballast 1.5 mbar (abs.) with gas ballast Includes suction filter 1 1/4" and paper filter cartridge Flow rate 84 m³/h The drive operates on 180-watt servo motors and 16 mm ball screws. With this configuration, the maximum speed, depending on the spindle pitch and software, is 500 mm per second. The control system operates with ground and hardened roller guides featuring a gothic profile. If you have any questions or require further information, please write or call us.

Condition: used, FARO Mobile 3D coordinate measuring arm / Portable CMM FARO Titanium Arm 2.4 m measuring range · Single Point 0.051 mm · Volumetric ±0.072 mm For sale is a used mobile 3D coordinate measuring arm from the manufacturer FARO. The measuring system is suitable for industrial measuring and testing tasks, quality assurance, component measurement, manufacturing metrology, and for general geometric measuring tasks. Technical data: Manufacturer: FARO Nlodpfjz Hm Ngex Airjh Model: Titanium Arm Device type: Mobile 3D coordinate measuring arm / Portable CMM Date of manufacture: 06.12.2004 Revision: 21.0 Made in Switzerland Measuring range: 2.4 m Single Point: 0.051 mm Volumetric: ±0.072 mm Certification date according to nameplate: 07.06.2016 PLANOLITH granite measuring plate: Accuracy class: DIN 876/1 Permissible deviation: 0.022 mm Actual deviation: 0.00498 mm Test date: 03.11.2003 Weight of granite plate: approx. 460 kg Dimensions of measuring table: approx. 1200 × 800 × 940 mm (L × W × H) Total weight of measuring table: approx. 560 kg Equipment: FARO Titanium Arm PLANOLITH granite measuring plate with substructure FARO transport case Measuring probe and measuring accessories as shown in the pictures Accessories case Magnetic clamping plate Connection cable FARO manuals and documentation Software and data carriers as shown in the pictures Further accessories as shown in the pictures Areas of application: 3D coordinate measurement Quality assurance Component measurement Component inspection Manufacturing metrology Tool and fixture construction Scope of supply: 1 × FARO Titanium Arm 3D coordinate measuring arm 1 × PLANOLITH granite measuring table with substructure Transport case, measuring accessories, documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplates present The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Nodpfjzdy Iasx Airolh Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) Nsdpfx Aezii Dnsirslh XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.