Used Ipe Bg Jet 300 Mit Presse for sale (32,255)

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Pgjdpfxey Dc R Ts Alhen Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: new, Year of construction: 2026, Recirculating chamber furnace, electric, brand new, delivery time 16 weeks - Maximum temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Eurotherm Nanodac controller/recorder with color touch display - 2 circulating air fans - Double door with safety door sensors - Over-temperature protection, Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical configuration: 400 V / 50 Hz / 3NPE - Increased heating capacity of approx. 70 kW - Temperature accuracy: +/- 6 K in the empty oven - Documentation and CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated but is covered with stainless steel sheet. This allows unrestricted access with all track widths. Alternatively, an insulated floor can be offered (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Keywords: oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heat cabinet, recirculating oven, chamber oven, heating chamber, chamber recirculating oven, tempering oven, annealing oven. Pjdpfxjv Hg Eus Alhegn

Condition: new, Year of construction: 2026, Forced convection chamber oven, electric, new unit, delivery time 12 weeks -Temperature 300°C -Internal dimensions WxDxH 1500 x 3000 x 2000 mm -External dimensions WxDxH 2410 x 3560 x 2730 mm -Volume 9000 liters -Control system Eurotherm Nanodac, 100 programs with 25 segments each -Further 100 programs can be saved/loaded via FTP or a USB memory stick -2 forced convection fans -Double door with safety door sensors -Over-temperature protection, Eurotherm 3216i -Control panel/recorder with color touch display -Sturdy steel construction, exterior in anthracite -Motorized dampers -Electrical version 400 V / 50 Hz / 3NPE -Increased heating capacity approx. 70 kW Pgedpfx Aolkb Ezelhsn -Guide rails, recess for driving in a cart -Documentation, CE declaration of conformity -Electrical circuit diagram with parts list We would be happy to include transportation, installation, and training for your employees. As a new unit, it is also available with an exhaust fan and other equipment! Delivery time approx. 10 - 12 weeks. Please contact us! We offer new and used industrial ovens, which we can also modify and supplement according to customer requirements. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, forced convection oven, chamber oven, heating oven, chamber convection oven, annealing oven, tempering oven

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle Pgjdpfx Alsy Nuf Tjhon - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 15,600 kg, maximum load weight: 8,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Chassis Steel welded construction 1 pair of wheel recesses embedded in the steel platform in the wheel arch area, angled for access, length at the bottom approx. 1400 mm, approx. 400 mm deep. Frame in the main beam area is 400 mm higher than the wheel recess. If machines are to be transported where the overall height needs to be checked, please provide the technical data sheet of the machine types with precise details (if the overall height is exceeded -> customer's risk, approval required). Depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with robust ball bearing race, storage box embedded in the turntable extension. Pgedji Ri Ryopfx Alhon Foldable rear support. 2 chock blocks with holder. Aluminum side impact protection. Splash guards at the rear, covering the entire width. Extendable widening elements to 3,000 mm (not in the rear slope). (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm.) Storage compartment for wooden planks in the center of the loading area. Wooden planks 70 mm for widening to 3000 mm. Tie-down eyes, low loader 110 3 pairs of tie-down points, each with 10 tons capacity, integrated in the floor at the front. Includes 6 pairs of tie-down rings embedded on top and on the side in the outer frame, each with 10 tons capacity. 1 x in the neck area. The remaining ones are distributed in between, with a distance of no more than 1200 mm. 1 x rear slope. 5 pairs of pocket slots embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 tons ring tie-down eyes, not included in the scope of delivery). Coupling device, trailer turntable. Drawbar with tested 40 mm drawbar eye. Axles + Suspension SAF drum brake axles. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber bearing. Braking system 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle. ABS and ALB, with ABS plug at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Wheels & Tires 235/75R17.5, according to manufacturer's choice. Steel rims in twin configuration, factory silver. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red side marker lights at the rear. 2 x 7-pole fail-safe plugs at the front, with connection cable. 1 LED rotating beacon with holder, switched via the sidelights (beacon can be removed). 2 pairs of warning panels, double LED-illuminated and extendable to 3,000 mm. Floor Front area, steel floor, included. Thereafter with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering. Rear slope with 70 mm soft wood floor. Low loader platform including rear slope 8,200 mm. Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable. Covered with wood. With spring-assisted support. Operating instructions At 10,000 kg axle load, an exception permit is required, only indivisible load is possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while observing the permissible axle/support and saddle loads. Country of registration/sign

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 8,400 kg, maximum load weight: 15,600 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis Steel welded construction Turntable with robust ball bearing race Foldable rear support 2 wheel chocks + holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle 1 pair of wheel recesses embedded in the low-bed area in front of the 1st axle, angled for entry, approximately 1600 mm long at the bottom, approximately 400 mm deep. Note: Frame in the main beam area is 400 mm higher than the wheel recess. 2 pairs of wheel recesses embedded in the low-bed area between the axles, angled for entry, approximately 600 mm long at the bottom, approximately 300 mm deep. Note: Frame in the main beam area is 300 mm higher than the wheel recess. Extensible widening to 3,000 mm (not in the rear slope) Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-bed trailer 1 pair of tie-down cutouts embedded in the longitudinal beam at the front in front of the 1st axle, each 10 tons. 4 pairs of tie-down holes in the outer frame, each 5 tons. 7 pairs of tie-down eyes embedded on the top and side in the outer frame, each 10 tons. 1 x at the front in front of the 1st axle 6 x in the low-bed First tie-down eye 250 mm from the front and last max. 250 mm from the rear, distance between tie-down eyes not greater than 1100 mm Coupling device, trailer turntable Tow hitch with tested 40 mm tow ball Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and tires 235/75R17.5, according to manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front 2 white/red marker lights at the rear Pgodpfx Alei Ri Rvehjn 2 x 7-pole non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon can be removed) 2 pairs of warning signs, double LED-illuminated and extensible to 3,000 mm Floor Front slope with steel/diamond plate covering Storage box embedded in the drive-over slope to the front slope, then with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm soft wood floor Low-bed platform including rear slope 6500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood With spring-assisted support Operating instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) Registration country/Signs Registration country: Germany With DEKRA acceptance and certi

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 controller, serial number: 234547768256008, professionally and completely refurbished and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Pgjdpfoi Ebhljx Alhon

Condition: ready for operation (used), Indramat KDV 2.2-100-220/300-220 power supply, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Pgsdpji Ebi Uefx Alhon

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo power supply, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Psdpfsi Ebrgex Alhjgn

Condition: ready for operation (used), Indramat TDM 3.2-030-300-W1 controller, serial number: 240061-06062, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Pgedoi I I Ayepfx Alhsn

Condition: ready for operation (used), Indramat TDM 2.1-15-300-W0 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Pgedpfx Alji Ebryohen

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 controller, serial number: 23450022128, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Podpfxei Ebncs Alhsgn

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 controller, serial number: 23450022133, professionally and completely refurbished and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Pgodpfx Alsi Ebngohon

Condition: ready for operation (used), Indramat KDA 1.1-100-300-W1-220 AC. Main spindle drive, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Psdpfxji Ebgys Alhjgn

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 controller, serial number: 5765, professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Pgjdji Ebhpepfx Alhsn

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 A.C. servo controller, serial number as shown in the photo, used, professionally refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Pgedsi Ebhtepfx Alhjn

Condition: ready for operation (used), Indramat TDM 1.2-030-300-W0 AC servo controller, serial number as shown in the photo. Used, professionally overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Pgjdpfx Aji Ebmuolhsn

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 AC. Servo controller, serial number as shown in the photo, used, professionally overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Psdsi Ebhwepfx Alhsgn

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Pgsdpfoi Ebhhex Alhsn

Condition: ready for operation (used), Indramat KDV 1.3-100-220/300-W1 power supply, serial number SN23226473930903, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photo. Pgodpei Ebi Aofx Alhen

Condition: ready for operation (used), WEG W22 motor with Karl Klein DNG 6-25/TS-300°C fan SN: 1612-302113, used, in good condition, fully functional, scope of delivery as per photos. Psdpsx Dwinofx Alhegn

Condition: ready for operation (used), Indramat TFM 3.1-050-300-W1-220V frequency inverter MNR: R911234797 SN:23515802541, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as per photos Pgsdpfxox Dw H Ts Alhjn

Condition: ready for operation (used), Indramat KDV 2.3-100-220 / 300-000 Power Supply SN:248468-02566, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Pedjx Etyhspfx Alhjgn

Condition: ready for operation (used), Heidenhain LC 481 ML 1140mm length measuring device ID: 327 300-31 SN: 13689665U with AE LC 481 read head ID: 337 452-01 SN: 13689671U, used, good condition, 100% functional, scope of delivery as per photos. Pedpfx Aey Nqgyelhegn

Condition: new, Year of construction: 2025, power: 30 kW (40.79 HP), pressing force: 300 t, stroke length: 200 mm, table width: 700 mm, table length: 1,200 mm, throat depth: 370 mm, stroke adjustment: 150 mm, Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, utilizing force generated through an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key advantages Stable stroke performance and high repeatability in mass production Operator safety-focused design (light curtain + safety systems) Low maintenance requirement with centralized automatic lubrication Production-ready operation with PLC control + two-hand/foot pedal control Areas of application Cold cutting and punching operations Cold forming applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-way guided slide system • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Ray barrier finger–hand protection safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener Podjx N Nfhjpfx Alhjgn • One set of dies manufactured to required specifications • Eight-way guided slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Distance table–ram: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (stroke setting): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table bore diameter: Ø260 mm Table size: 700×1200 mm Die mounting hole diameter: Ø60 mm Ram size: 780×400 mm Table height from floor: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 SPM Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.