Used Johannsen Typ T 45 for sale (75,913)

Condition: used, Year of construction: 1988, used, good condition cleaned, tested manufactured by Johannsen type T 45 built in 88 number of aggregates R + L Lon motor 1,5 kW exhaust connection D 140 mm required space ca. l x w x h mm 1000 x 500 x 1000 weight ca. 130 kg total connected power ca. 1,5 kW Ljdpfx Afjvwf Troueac located in 97447 Gerolzhofen sale in current condition as on Foto seen - free on truck -

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush with the rear, note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang Without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. Plug adapter for front locking, to secure containers without a tunnel from below, with bracket when not in use Rear extension on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation Lajdoi Ri Eqopfx Afuec 2 chock blocks with holder Aluminum side impact protection Galvanized steel underride protection Extendable underride protection for 45 ft containers Half-shell fenders, included with anti-spray flaps according to EC regulations Rear impact guard Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total train weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded lines for easy servicing 200 spring-loaded parking brake 2 keyed coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In some towing vehicles, false diagnoses may occur, even though the function is working) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connecting cable Operating Instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underride protection must be manually extended! An exemption permit according to § 70 StVZo is required! Registration Country/Signs Germany with DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder 390 contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized including passivation 15-year warranty against rusting Support legs black coated

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Lajdpfx Afoi Rizusuoc Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: good (used), Year of construction: 1999, functionality: fully functional, Tamroter Gardener Denver Screw Compressor Type ES 45-7.5 EANA Year 1999 S/N 09990138 Regular maintenance Operating hours: 17,482 h Start-up hours: 9,242 h Air flow: 1,712 h Oil flow: 663 h Oil change: 663 h Capacity 7.95 m3/min Motor 45 kW Voltage 400 V/50 Hz Ljdpfxsurc Npe Afusac Weight 935 kg CE marked

Condition: good (used), Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T The scope of delivery includes: 02x workbench stand, used Material color: blue Stand height: approx. 910 mm Stand depth: approx. 1,050 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( welded framework ) 04x workbench crossbars, used Material color: orange Box profile: 120 x 50 mm Truss type: HN 120|20 clear width: 2,700 mm 08x locking pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out The pictures serve to illustrate the material. The material color may vary. The workbench racks are commissioned in an assembled state; The workbench stands are pre-assembled; The production time is usually approx. 3 - 5 working days. Laodpfx Afjrdy Ivousc Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Jung Heinrich Type: T Technical Data for Installation: Number of Racking Rows: 01 pc Length per Row: 25,300 mm Number of Bays per Row: 09 pcs Number of Levels incl. Floor Level: 02 pcs Technical Data for Capacity: Pallet Positions per Bay: 09 pcs Pallet Positions per Row: 81 pcs Total Pallet Positions: 81 pcs Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Maximum Pallet Weight: 900 kg Scope of Delivery Includes: 10x Pallet Racking Uprights, used Material color: blue Profile dimensions: 100 x 65 x 2.0 mm Incl. horizontal and diagonal braces, foot plates The uprights are pre-assembled (welded truss construction) 2,200 mm high 1,100 mm deep 36x Pallet Rack Beams, used Material finish: Sendzimir galvanized Beam type: HN 120|20 Box profile: 120 x 50 mm Connector: 3-hook Clear span: 2,700 mm Max. load per beam pair: 2,700 kg, with evenly distributed load 72x Locking Pins, used Material finish: Sendzimir galvanized To secure the beams against unintentional lift-out Ledstq Hfuepfx Afujac 40x Wedge Anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 20x Shim Plates, used Finish: fully galvanized For leveling racking uprights placed on uneven floors 01x Load Sign With specifications for bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. Any further transport or shipping of this item will incur additional costs, which can be requested from us depending on delivery location and scope.

Condition: good (used), Year of construction: 1993, Table dimensions 800 x 2790 mm throat 550 x 310 mm Ledpfx Afezfqkhjusac motor power 4,0 kw sanding belt measurements 150 x 7800 mm 2600 Working width 850 mm Dust suction hood 180 mm

Condition: ready for operation (used), Neugart Type: WPL 70-05 Article number: 44529-070-01 Angle planetary gear, used, good condition, 100% functional, scope of delivery as per photos Lodstxfg Espfx Afuoac

Condition: ready for operation (used), Emod, type VKM64/23-90 3~ motor, motor no. 7885881, 0.65 kW, 8450/min, used, in good condition, 100% functional. Lajdpfxji D Huze Afujc

Condition: used, Year of construction: 2013, operating hours: 12,310 h, functionality: fully functional, overall weight: 575 kg, load capacity: 45 kg, arm reach: 2,050 mm, ABB industrial robot featuring an IRB 4600-45/2.05 Type C manipulator and an IRC5 M2004 controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 45 kg and a reach of 2050 mm. Manufactured in 2013, it has accumulated 12,310 operating hours and is running RobotWare software version 5.15.0266.00. It is equipped with a FlexPendant teach pendant, two connection cable sets, and a power cable. Ledpfx Ajzamidofuoac

Condition: good (used), For sale is a used Panhans milling machine Type 245 with 8 milling speeds. The machine has been inspected and refurbished by our qualified staff and is in good condition. Technical data: - Double swiveling unit - Swiveling range -45° to +45° - Electrically height-adjustable and swiveling - Overhead control panel - 8 milling speeds - Direction of rotation switch - Motor power 11 kW / 15 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, router, milling Ljdpfx Afey Nncfeueac Reference: R-S1632

Condition: new, Support roller (28105) Four-point bearing Slewing bearing roller Manufacturer: INA Type: NUTR 45100 A Inner diameter: 45 mm Lasdsip Da Sjpfx Afujc Outer diameter: 100 mm Width: 30 mm 4 pieces available

Condition: used, grinding length ca. 2.600 mm grinding width ca. 850 mm Lasdpfxjxtbvde Afusc working heigth ca. 340 mm engine 4 kW

Condition: good (used), 70 linear meters of shelving, Schäfer Type R7000 Used, in good condition, see photos. Height: 3 m Depth: 50 cm Load capacity per shelf: 200 kg Field width: approx. 99.8 cm Negotiable price: €9,490.00 net, ex warehouse. Offer includes: + 71 uprights/frames, 3 m, galvanized + 350 shelves, 200 kg load capacity per shelf, galvanized 5 levels per bay (more levels are available at an additional cost) Various heights up to 12 m available. Goods are in stock. Transport and assembly available upon request. Ledpeh Et Twsfx Afuoac Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excluding VAT, ex warehouse.) Purchase/Sale: We are continuously looking for and offering numerous items from various sectors: - Complete clearance of business premises - Business liquidation - Quick, flexible, and efficient! - We also clear and/or dispose of goods for insolvency administrators. Send us some keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: good (used), 30 linear meters of shelving unit, Schäfer Type R7000 Used, in good condition, see pictures. Height: 2.1 m Depth: 50 cm Load capacity per shelf: 200 kg Bay width: approx. 99.8 cm Negotiable price: €3,250.00 net, ex warehouse Offer includes: + 31 units of uprights/frames, 2.1 m, galvanized + 120 units of shelves, 200 kg load capacity per shelf, galvanized 4 levels per bay (more levels are possible for an additional charge) Various heights up to 12 m available. Goods are in stock. Transport and installation possible upon request. Inspection possible at any time by appointment. Lajdpfxjh Eulko Afuec Further information available upon request. We continuously have over 5000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Purchase/Sale: We are continuously looking for and offering numerous items from various areas: - complete liquidation of business premises - business closures - fast, flexible, and efficient! - We also clear and/or dispose of goods for insolvency administrators. Please send us some keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: used, Used machine Condition: age-appropriate Technical data: Table size 2600 x 900 mm Max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right Availability: short term Location: Solingen Lsdowka Rwopfx Afusac

Condition: used, functionality: fully functional, machine/vehicle number: 04217, For sale is a reliable and robust temperature control unit from Regloplas, model 90S. Used condition, with age-appropriate signs of wear on the housing. 3 units available. Technical data Type: 90S / 6 / TS22 / 1K / RT45 Max. temperature: 90 °C Heating capacity / power rating: 7.1 kW Voltage: 400 V / 3 PE (three-phase) Frequency: 50 Hz Current: 11 A Laodpoy E Hzrofx Afuoc Filling volume: 3 l Wiring diagram no.: 04217

Condition: used, Year of construction: 2018, Operational unit. Ask for additional information and pricing! Machine is stored and put on a pallet recently. Ledpfx Asy Ny Umefujac

Condition: good (used), Year of construction: 1988, functionality: fully functional, operating hours: 300 h, power: 4 kW (5.44 HP), grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, actuation type: manual, total height: 1,300 mm, total length: 3,800 mm, total width: 2,100 mm, overall weight: 520 kg, year of last overhaul: 2015, Equipment: CE marking, The machine is located in a two-person operation and is being sold due to business closure. Laedpsy Simwsfx Afuec

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Lasdjy Rh Nzspfx Afuec Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Year of construction: 2002, condition: used, functionality: fully functional, Machine for cutting aluminium and copper pipes with the option for pipe end processing. Laedpeyt Sppefx Afuoc

Condition: used, Used machine Lsdpfsxwz N Sox Afuoac Condition: consistent with age Table size: 2600 x 900 mm Max. usable grinding length: 2700 mm Belt length: 7800 mm x 150 mm 1100 mm throat on the right Motor: 5.2/7.5 kW with belt air blast nozzle Shipping dimensions: 4300x1650x1800 mm Weight: 1300 kg Availability: short term Location: Röllbach

Condition: used, Year of construction: 2018, Operational condition machine. Available end of March. Ledpsyuv Hhefx Afuoac Ask for a quotation!

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Including pneumatic pressure shoe with belt brake Extraction nozzle: 180 mm Lajdpfx Afjx H U Nmouoc Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach

Condition: used, Used machine Condition: age-appropriate table size 2600 x 900 mm max. usable sanding length 2500 mm Ledpfxow I U Hye Afueac Belt length 7100 mm x 150 mm 1100 mm offset right motor 5,2 kW Shipping dimensions: 4300x1650x1800 mm weight: 620 kg Availability: short term Location: Flörsheim