Used Kaeser Piston Compressor, Air Compressor, Compressed Air Generator for sale (35,292)

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar Hfodpfx Aewypqrsf Ejh - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC, type Rollair 40 -- RLR 40BM6 Manufacturer's serial no. 6240330200, year of manufacture 2003 Volumetric flow rate 4.6 m3/min Pressure rating 10 bar Main motor power 30 kW Mains connection 400 volts, 50 Hz Hsdpfxsfmim Ue Af Eofh Connection thread 1 1/2 inches - 36022 operating hours recorded (compressor running time) - 19257 operating hours recorded (load hours) - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read Hfsdpfx Afoiyu Ife Eoh - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: used, Year of construction: 1990, Industrial stationary piston air compressor in sound-insulated steel cabinet. Manufacturer: Reflex Hodpfoyl Nz Hex Af Esfh Model: ZU 57/3 – Typ 180 D Air receiver: 180 liters Made in Germany Complete unit including: Piston compressor Electric motor 180L air tank Pressure switch Noise reduction enclosure Condition: Used – Not tested. Sold as seen, ex works. Suitable for refurbishment or spare parts.

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Hsdpszcaufefx Af Eefh Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: used, This listing is for the Peak Scientific Corona Nitrogen Generator 1010 paired with the Corona Air Compressor. Hfodpfx Afexwc Iio Ejh The unit is in full working condition and is ready for immediate release. System Details: The Peak Scientific Corona Nitrogen Generator 1010, paired with the Corona Air Compressor, is engineered to meet the demands of labs requiring high-purity nitrogen, specifically designed for applications like chromatography. The Corona 1010 is ideal for the Thermo Scientific Corona Veo Charged Aerosol Detector and is also suitable for LC, HPLC, and UHPLC applications, providing nitrogen flows up to 5 L/min at 80 psi. Key Features: Maximum Gas Flow: 5 L/min Maximum Output Pressure: 80 psi (5.5 bar) Maximum Purity:

Condition: good (used), Piston compressor Motor power: 18 kW / 24 HP Unfortunately, the compressor does not have a nameplate, so I do not know the exact air delivery. Hfodpfx Aevv Rpcef Eoh

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation Hsdoyy U Shepfx Af Esfh powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Year of construction: 2020, Offered here is a complete compressed air system with the following components: Hjdpfx Afsy Ndago Eefh 1x screw compressor Kaeser SK 22 (Year 2020) 1x screw compressor Kaeser SK 19 (Year 1995) 1x refrigerated dryer Kaeser TB 26 (Year 2016) 1x air receiver Kaeser 500 l (Year 1986) The system and individual components are in very good condition. Location: ex customer site (Saarland) - available at short notice by arrangement -

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Hjdpoxyhdbsfx Af Esfh Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Condition: good (used), Motor output 1 kW Max. pressure 16 bar Hedpovwgn Rofx Af Ejfh

Condition: used, Oil-water separator KAESER BEKO, type Öwamat Tank diameter: 600 mm Overall height: 1200 mm With activated carbon filter Space requirement: Ø 700 x 1200 mm Hfodpoy Ty Sajfx Af Eeh Weight: approx. 30 kg In good condition.

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Volumetric flow rate of air (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Hodpfxsdzqn Ue Af Eofh Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded connection (air): G 2" Threaded connection (water): G 3/4" Weight of the aftercooler: 11 kg Dimensions of the aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Volumetric flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: used, W-KRONEN HP10 LT500 Compressed Air Compressor with integrated Aerotec Refrigerated Compressed Air Dryer Aerodry PRO 1000 The W-Kronen HP10 LT500 is a powerful and reliable air compressor designed for demanding applications in trade, industry, and workshops. In combination with the integrated refrigerated compressed air dryer, this system provides a compact, efficient, and ready-to-use complete solution for producing high-quality compressed air. Technical specifications: - Tank size: 500 L - Tank pressure: 10 bar - Intake capacity: 1100 L/min Hfedpfx Afoy Uwt Dj Eoh - Delivery rate: 950 L/min - Speed: 1200 rpm - Sound pressure level LWA/dB: 97/78 - Motor kW/hp: 7.5 / 10 - Voltage/Hz: 400 V / 50 Hz, 16A plug

Condition: used, Year of construction: 2008, Air consumption 42,83 m³/min Motor output 250 kW Overall size 4000 x 2100 x 2500 mm 0 min. 4 bar 0 max. 13,5 bar Weight 20.000 kg Dimensions (LxWxH) 13,00 x 2,95 x 2,90 m The pneumatic container is used to provide oil-free dry Compressed air (42 m³/min max. 7.5 bar) for test facilities and consists of a self-contained container functional unit, in which the following Machines, as shown schematically in Figure 2, were integrated: - Compressor EKO 250 D - Refrigeration dryer HHDp 4500/HF 5-M/5 - Activated carbon adsorber BEKO Clearpoint L 3400 V - Post-filter HF 6-60 - Oil-water separator BEKO Öwamat 16 Hodpovx Uvlofx Af Ejfh - El. Steam trap BEKO 14

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Hfsdehalvdjpfx Af Eoh Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter. Hedpexf Uukjfx Af Eofh

Condition: good (used), Manufacturer: KAESRER Year of manufacture: 1999 Type: AIRTOWER 11 Item number: 1.8833.10020 Serial number: 1010 Operating hours: 5,766 h Pressure: 7.5 bar Delivery volume: 975 l/min Motor speed: 3,000 rpm Connection: 7.5 kW Dryer: TU 11 Refrigerant: R 134a Pressure: 16 bar Hfjdpfxswhwx He Af Eeh Condition: Good Weight: 270 kg Dimensions: 680 x 780 x 1,300 mm

Condition: used, functionality: fully functional, Year of construction: 2024, Kaeser Compressor Mobilair M 27 PE — Year of manufacture 2024 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Pneumatic hammer for overhead and ladder work, thanks to its low weight of less than 6 kg. Technical data: Weight: 5,5 kg Hedpey A E Eqjfx Af Ejfh Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product images are sample photos showing the machine in new condition — actual condition varies depending on duration of use - On-site inspection in 37574 Einbeck available by appointment Price EUR 10,400 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: fully functional, Year of construction: 2024, Kaeser Compressor Mobilair M 82 — Year of manufacture 2024 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images Hodpfx Aoy A E A Asf Eefh - On-site inspection in 37574 Einbeck available by appointment Price EUR 29,800 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: fully functional, Year of construction: 2025, Kaeser Compressor Mobilair M 125 - braked — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Hfjdsy A E Aiepfx Af Eoh - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 61,500 plus VAT | EXW Einbeck | Delivery upon request

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2AC-8100, overall weight: 18,000 kg, total length: 4,800 mm, total width: 4,000 mm, total height: 3,405 mm, space requirement length: 7,000 mm, space requirement width: 6,000 mm, space requirement height: 5,000 mm, motor manufacturer: HIGEN, power: 450 kW (611.83 HP), fuel type: electric, volume flow: 2,730 m³/h, operating pressure: 10 bar, pressure (min.): 7 bar, pressure (max.): 16.5 bar, ambient temperature (min.): 35 °C, ambient temperature (max.): 40 °C, type of cooling: water, input voltage: 6,600 V, input frequency: 50 Hz, Equipment: documentation/manual, This compressor has used for manufacturing high pressure air (10 bar). I will sell this compressor with electric starting panel (Motor starting method : Reactor) Hfjdpfsy Tt Nlex Af Esh This compressor was not operated after O/Haul in 2024.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, Compressor in like-new condition (demonstration unit), only 2000 hours of use. We are an authorized dealer. New list price: €32,074. Main features: Maximum pressure: 10 bar Power: 15 kW / 20 hp Flow rate: 2940 liters/min Hjdpfx Afezdf Iys Ejfh

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Speed: 745 rpm Hjdpexygblefx Af Esfh Volume flow: 3455 dm³/min Motor power: 22 kW

Condition: used, Year of construction: 2024, Compressor: Max. pressure (bar): 10 Max. pressure (psi): 145 Max. pressure (MPa): 1.0 Flow rate (l/s): 166.7 Flow rate (cfm): 353.1 Flow rate (m³/min): 10.0 Voltage (V): 400 Frequency (Hz): 50 Phases: 3 Motor power (kW): 55 Motor power (hp): 73.76 Motor speed (rpm): 2980 Weight (kg): 1365 Weight (lb): 3009 Air Dryer: Weight (kg): 174 Max. air pressure (bar): 14 Max. ambient temperature (°C): 46 Refrigerant type: R513A Max. refrigerant high pressure (bar): 21.7 Voltage (V): 400 Frequency (Hz): 50 Phases: 3 Power (kW): 3.23 Max. temperature (°C): 60 Min. temperature (°C): 5 CO2 equivalent (t): 1.75 CO2 equivalent (kg): 1104 Hfedpfjy N Sa Iex Af Ejh Max. low pressure (bar): 4.8