Used Kaiser V 40 Whs for sale (48,907)

Condition: used, Year of construction: 1985, machine/vehicle number: 131 153, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Bedpeuqc Agofx Ak Hslg Weight of machine approx.: 6,8 ton Extended machine accessories

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm Blodpou Icwgsfx Ak Hjg voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, Year of construction: 1990, machine/vehicle number: 131 542, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton Bsdeuqc Ezjpfx Ak Hjlg Extended machine accessories 2002 a roll feeder was installed Modell MWVL-200, YOM 2002

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t Bledjcb T Twspfx Ak Hog - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Blsdpovmfzhefx Ak Heg Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Standard configuration hydraulic tool clamping device Extended machine accessories Tool changing cart

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm Blsdpfxsyx Ii Ds Ak Hjg ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: used, Year of construction: 1980, machine/vehicle number: 130861, Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Bjdpfx Ajuqc Hljk Hjlg Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW Extended machine accessories IMCO Press force measurement Automation Grip Feeder, Type ZR18ZT1Max. Sheet width 180 mmFeeding length 150 mm

Condition: used, Year of construction: 1986, machine/vehicle number: 131234, Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Bljdjw Tuqpjpfx Ak Hog Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW Extended machine accessories Die lifters with balls for die change IMCO Press force measurement Automation Grip Feeder, Type ZR 250Max. Sheet width 250 mmFeeding length 210 mm

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, pressure:63 t no. of strokes:400 Hub/min sheet width:180 mm stroke:10 - 80 mm feed length:150 mm band width:180 mm control:KAISER voltage:380 V Blsdpfx Akjcxxt Te Hog dimensions of the machine ca.:1,85 x 2,70 x 3,00 m double-column machine with double connecting rods with adjustable stroke, electric rpm control, electric tappet adjustment, pneumatic tappet compensation, Imco individual pressure force monitoring device (split right / left), Unidor tool monitoring system, blower device, original Kaiser gripper feeder type ZR 18D, emergency cut-off, electric 2-hand operation, free-standing control panel

Condition: ready for operation (used), Year of construction: 2016, This 4-axis HOMAG PROFI BMG 512/40/12/V/A was manufactured in 2016, featuring a POWEREDGE gluing unit and a 4-fold edge magazine. It includes an 18-fold disc tool-changer, a 12 kW processing spindle, and a C-axis with unlimited swivel range. The machine supports workpiece lengths up to 4000 mm and thicknesses up to 300 mm. Ideal for advanced woodworking, it offers dynamic space allocation for optimal processing area utilization. Contact us for more information about this machine. Additional information Workpiece • Lengths: 4000 mm for single placement / 2250 mm for pendulum placement • Widths: 1450 mm for all units and front stop • Maximum Workpiece Thickness: 300 mm (including clamping devices) • Up to 60 mm with standard clamps without restrictions for units and extraction. Table • Automatic Console Table • Automatically adjustable console table • 8 consoles Y = 1500 mm • 16 side and stop pins 140 mm, electromechanically controlled • Dynamic space allocation for optimal utilization in pendulum operation • Various double vacuum clamps • Without vacuum pump; supplied via a building-side vacuum system Tools • 18-fold disc tool-changer Main Drive • Processing Spindle: 12 kW (S6 operation) / 9.5 kW (S1 operation) • Spindle with hybrid bearings • Frequency-controlled rotation: rpm • Automatic feed reduction with decreasing spindle speed Injection Unit • POWEREDGE Gluing Unit • Gluing unit for 360° edge gluing on butt joints • Glue application via application roller onto edge material • 1 pressure roller Ø 50 mm, 1 follow-up roller Ø 35 mm • Max. edge height: 65 mm • Edge thickness: 0.4 - 3 mm (veneer 0.4 - 2 mm / PVC 1.0 - 2 mm) • Hot air nozzle for heating thick edges on small radii, controllable via NC Machine Control • POWERCONTROL PC 86 POWERTOUCH • With 21.5" Full-HD multitouch display • WoodWOP for graphical, dialog-oriented creation of CNC programs • Diagnostic system WOODSCOUT Additional Equipment • Interface for FLEX 5 unit • C-axis with unit interface • Unlimited swivel range • Coupling element for automatic tool change of FLEX 5 unit • Drilling Head • 21 spindles V17 / H4 / S0 / 90° • 17 vertical drilling spindles with quick-change system • T-shaped arrangement: 7 spindles in Y-direction / 11 spindles in X-direction • 4 horizontal spindles with saw 0 / 90° • Pre-cutting Station • Moves with the processing portal (X-axis) • Saw / Trimming Unit for Tool Changer • Combined trimming and corner rounding unit, sensor-controlled • Combined flush-trim / pull-knife unit Extra Information • Coolant tank for processing spindle • Integrated chip conveyor, discharging to the leftNote: The technical data and descriptions are for informational purposes only and are not binding. Bedjx D Nzvspfx Ak Holg

Condition: as good as new (ex-display), 1 unused universal milling head for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, "HURON" system, swivels over 2 axes, every angle adjustable. Spindle taper: ISO 40 Reach approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight: approx. 82 kg Accessories / Special features: • Manual tool clamping • Main spindle and all shafts and gears made of case-hardened and tempered chrome-nickel steel • 2 rotatable axes making every setting angle possible! "HURON" system • Tapered drives ground according to "KLINGELNBERG" system Bedpfxjdbny Ee Ak Helg • Main spindle bearings made of high-precision tapered roller bearings • 1 tool drawbar • Operating manual Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 1996, Main Drive Number of axis 3 Spindle Speed 8000 RPM Tool taper BT 40 Tools Slots in storage 20 This 3-axis Leadwell V-40 was manufactured in 1996. It features a BT40 spindle, a 20-tool automatic tool changer, and a maximum spindle speed of 8,000 rpm. External coolant is provided at 2 bar. If you are looking to get high-quality milling capabilities, consider the Leadwell V-40 machine we have for sale. Contact us for more information about this machine. Application Types Milling Blsdpfex S Si Uox Ak Hjg

Condition: good (used), Year of construction: 2012, The pre-shredder (upper section) is not included in the offer. Only the lower part is offered. Paper baler / baling press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Year of manufacture: 2012 Empty weight: 4,200 kg Max. operating pressure: 260 bar Protection class: IP55 Blodeyrt T Topfx Ak Hsg Rated current: 30 A Rated voltage: 400 V, 50 Hz Rated output: 15 kW Electrical connection: 35 A gG Machine type: horizontal baling press for paper and cardboard

Condition: excellent (used), mileage: 50 km, power: 107 kW (145.48 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,590 mm, first registration: 04/2025, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, all-season tires, central locking, cruise control, immobilizer system, parking sensors, power assisted steering, sliding door, traction control, trailer coupling, = Additional options and equipment = - Apple CarPlay - Automatic dipped headlights - Heated exterior mirrors - Passenger bench seat - Third brake light - Electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Cruise control - Wooden loading platform - Height-adjustable steering wheel - Wireless charging function for mobile phones - Air conditioning - LED daytime running lights - Front centre armrest - Radio DAB MP3 Bluetooth 4.0 - Rain sensor - Spare wheel - Reversing camera - Side sliding door - Immobiliser - Blind spot monitoring - Heated windshield - Two rear doors - Partition wall - Partition wall without window = Further Information = General information Number of doors: 3 Cab: single Registration number: V-40-LRF Technical information Transmission: 6-speed automatic Maximum front axle load: 1,950 kg Maximum rear axle load: 2,100 kg Dimensions Length/height: L4H3 Dimensions (L x W x H): 569 x 208 x 250 cm Weights Blodov Iqm Eopfx Ak Hog Kerb weight: 2,278 kg Payload: 1,222 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 2,000 kg (unbraked: 750 kg) Interior Interior: grey Condition Technical condition: very good Visual condition: very good Number of keys: 2 (2 remote controls)

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm Blodpjxab Rhofx Ak Hjg distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Condition: excellent (used), mileage: 22,800 km, power: 125 kW (169.95 HP), first registration: 04/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: grey, gearing type: automatic, number of gears: 6, emission class: euro6, number of seats: 5, total length: 5,480 mm, total width: 1,960 mm, total height: 1,940 mm, permissible axle load (axle 1): 1,625 kg, permissible axle load (axle 2): 1,650 kg, Year of construction: 2024, Equipment: ABS, Apple CarPlay, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, traction control, = Additional Options and Equipment = - Automatic dipped headlights - Heated exterior mirrors - Passenger airbag - Third brake light - Euro 6 - Driver airbag - Remote central locking - Cruise control - Wooden loading platform - Height-adjustable driver's seat - Air conditioning - LED daytime running lights - Front center armrest - Fog lights - Parking sensors - Rain sensor - Reversing camera - Immobilizer - Advertising (stickers applied) - Partition wall with window = Further Information = General Information Number of doors: 6 Cabin: double Registration: V-40-FSF Technical Information Bjdpfexx Uaaex Ak Holg Number of cylinders: 4 Engine displacement: 1,997 cc Front axle: Max. axle load: 1,625 kg; Steering Maximum rear axle load: 1,650 kg Weights Unladen weight: 1,949 kg Payload: 1,121 kg Gross vehicle weight: 3,070 kg Maintenance, History and Condition APK (General Technical Inspection): valid until 04.2027 Technical condition: very good Visual condition: very good

Condition: excellent (used), Year of construction: 2011, Siemens Sinumerik 828D control with ShopMill Travel paths X/Y/Z: 1020 x 635 x 610 mm Bjdpfx Akjvtcyuo Holg Spindle speed: 10,000 min-1 Tool magazine for 24 tools SK 40 IKZ Chip conveyor Measuring probe

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from a Still forklift -Drive: 40 V 2.5 kW Bjdpfx Aocwqdfjk Hslg -Dimensions: 340/225/H300 mm -Weight: 32 kg

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Benning, charger Belatron type E 220 G24/40 B-FB -Input voltage: 220V 50Hz -Power: 25.2V/40A -Quantity: 2x charger available -Price per piece Blodpjq Adp Hefx Ak Hsg -Dimensions: 550/410/H780 mm -Weight: 53 kg/pc.

Condition: good (used), fan, ventilator, blower Bljdpeunn Hlofx Ak Heg -Manufacturer: Prein fan, fan ventilator, radial fan -Type: RES 85/42 -Voltage: 80 V / 40 W -Fan wheel: Ø 90 x 45 mm -Number: 2x blowers available -Price: per piece -Dimensions: 180/160/H140mm -Weight: 1.6 kg/pc.

Condition: ready for operation (used), Dunkermotoren 44714012200.5 Motor 40 V, used, normal signs of use, 100% functional, scope of delivery as per photos Bedpfx Akei D Hp Sj Hslg

Condition: excellent (used), Weiss Bedpfx Akow I Rxre Hjlg Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1991, Used capping machine BERTOLASO Aluminium screw up to 1200 bph The Bertolaso aluminium capper clearly meets the needs of bottling with aluminum caps. Moreover, technicians overhauled this model in 2008 and adapted it for Stelvin capping, thereby ensuring reliability and versatility. Technical specifications The machine effectively uses one capping head to operate with aluminum screw caps. Furthermore, the system performs a clockwise rotational movement to ensure a uniform and precise capping process. Consequently, it processes 1200 bottles per hour, making it an ideal solution for small and medium productions. The compact dimensions of the machine, measuring 1200 mm in length, 900 mm in width, and 1200 mm in height, therefore enable easy integration into existing production lines. Additionally, its weight of 0 kg provides a stable and durable structure suitable for intensive use. Safety and maintenance Integrated safety features undoubtedly protect operators during use. Thus, these systems keep the machine compliant with modern industrial safety standards. Besides, the modular design and availability of original Bertolaso components simplify regular maintenance. Efficiency and adaptability This machine, ready for use, optimizes production times while maintaining a high level of capping precision. Moreover, the adaptation for Stelvin caps satisfies current market demands and, as a result, offers greater flexibility compared to the original model. Applications The Bertolaso screw capping machine efficiently serves various industrial sectors, including wine, food, and beverage industries. Consequently, its versatility and high performance provide an optimal choice for companies requiring a reliable and efficient machine for aluminum cap closures. Conclusion Bljdjvgva Iepfx Ak Hog The VB 40 V 22 model delivers robustness, efficiency, and safety. Furthermore, it caps 1200 bottles per hour and adapts for Stelvin capping, thus making it a highly competitive solution for companies of various sizes. Consequently, Bertolaso reliability and compliance with safety standards make this machine a valuable investment in the bottling sector.

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 430 mm, area performance: 2,000 m²/h, warranty duration: 24 months, tank capacity: 40 l, water tank capacity: 40 l, rotational speed (min.): 180 rpm, brushing unit diameter: 430 mm, We offer for sale a hand-guided scrubber dryer B 40 C Ep 230V. Condition: Perfect - the machine is brand new Year of manufacture: 2024 The mains-powered, hand-propelled B 40 C Ep scrubber dryer can be optionally equipped with a roller brush head featuring parallel cylindrical brushes and sweeping functionality, or with a disc brush head. It is ideally suited for easy, safe, and convenient operation. Four different squeegee blades are available. The scrubber dryer can also be fitted with a range of other useful optional features, such as the Home Base "Mop" or "Box" kits for better transport of additional tools. Innovative Kärcher accessories such as brushes in various hardnesses, different squeegee blades, pad driver plates/roller pad shafts, and pads make this scrubber dryer suitable for a wide variety of cleaning tasks. Technical Data Brush working width (mm): 430 Vacuum working width (mm): 850 Fresh/dirty water tank (l): 40 / 40 Power supply voltage (V/Hz): 230–240 / 50 Rated power (W): up to 1300 Weight without accessories (kg): 66 Dimensions (L x W x H) (mm): 1212 x 520 x 1142 Features and Benefits EASY Operation switch Intuitive operation. Essential functions are easily controlled using the EASY switch. Straight or curved squeegee For perfect suction on every floor type. A variety of suction lips are available: made from natural rubber or oil-resistant polyurethane, slotted lips for delicate floors, or closed lips for rough floors. Mains operation Uninterrupted work. Low weight due to mains operation – ideal for pressure-sensitive floors. Practical device design The slim unit is easy to maneuver in confined spaces. The asymmetric shape ensures the best possible visibility of the cleaning area. Bjdpfex Auu Esx Ak Hjlg

Condition: excellent (used), Year of construction: 2011, Screw compressor GRASSAIR RLR 40v 7 ATLAS COPCO screw module machine after service Technical data: capacity 4.20 m3/min (4200 L/min); 30 KW motor; maximum pressure of 9.50 bar; mileage 9714 h; 2011; compressor fully operational; net price: 16500zł gross price: 20295 zł Bljdpougg Taofx Ak Hog