Used Kara Abc Kara Master for sale (1,746)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Godexz Eg Njpfx Akajug Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Complete Kara Master sawmill Year of construction 1996 CE mark The sawing line consists of 2 Kara Master 08M sawing machines 1 Kara edger Technical data of the KARA MASTER machine Motor: 37kW / 1500 rpm Hydraulic unit: 5.5kW / 1500 rpm / 50 Hz Transfer table 9.5 m long, 0.7 m wide Weight, kg approx. 4900 kg Saw blade diameter 800-1200 mm (with undercarriage 800...1100 mm) Cutting height: 295...495 mm Recommended speed for the saw blade diameter 800mm 1300r/min 900mm 1170r/min 950mm 1100r/min 1000mm 1050 rpm 1100mm 960r/min 1200mm 880 rpm Diameter of the blade hole: 50 mm 015 mm, distance from blade hole 50 mm 9 m x 660 mm Additional equipment Pump: 34 l/min, 150 bar (blade shaft speed 1100 rpm) 180 bar from the tractor hydraulics (only in mobile) Stepless feed 0...130 m/min Kara Pro 200 control unit Programmable up to 120 sizes in steps of 0.1 mm. Programming addition during sawing, storage of the last dimension used. 9 Feed speed, m / min infinitely variable 0-130 m / min Godpfx Aksum I S Eeaoug Kara Edger Type 32-250 Year of construction 1996

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 480 h, workpiece length (max.): 3,715 mm, workpiece width (max.): 1,320 mm, workpiece height (max.): 180 mm, overall weight: 6,060 kg, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, The machine has 270 operating hours, almost like new; features laser positioning. Technical data: Brand: Busellato JET Master T 4 Technical specifications: - Machining area: 3715x1320 mm (X,Y) - Workpiece height: 180 mm - Motor power: 9.5 kW - Max spindle speed: 24,000 rpm - C axis: available - Drilling unit: 19 spindles - 1 sawing unit - 16-position plate tool magazine - 3-part safety mat - Automatic central lubrication Vacuum pump capacity (m3/h): 244/286 Payment in euros or forints, price is net. Machine new price: €125,675. Sale price: €47,500 +36-30-9198-716 Guodpfxjxawlbe Akaeg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 08C35020538, power: 22 kW (29.91 HP), overall weight: 21 kg, total width: 540 mm, total length: 350 mm, total height: 590 mm, - Universally applicable - Easy to transport Guodpsulvnrefx Akasg - For spot heating of workplaces or for quickly heating small to medium-sized rooms Further information can be found in the data sheet.

Condition: used, Year of construction: 1993, functionality: fully functional, Complete Sawmill / Sawing Line E.GILLET–KARA-STENNER Description: For sale: complete E.GILLET–KARA-STENNER sawing line for professional timber processing. The line includes log handling, sawing, board discharge, cross transport and length cutting equipment. Suitable for a sawmill or wood processing company looking for a complete production line rather than separate individual machines. Guodpfszhbr Iex Akasg Included equipment: 1. E.GILLET wide band saw 2. KARA YS-VI, LS-240 circular saw 3. STENNER 105 wide band saw 4. Log conveyor — 26 m 5. Log conveyor — 7 m 6. Log splitter / log divider 7. Roller table — 16 m 8. Board unloading table 9. Cross conveyor — 8 m 10. RKG 1-400 cut-off / length cutting saw 11. Roller table — 6 m If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2000, condition: used, functionality: fully functional, APV Curd Master 18,000 ltr Cheese Vats Year: 2000 Cheese Vats are part of a larger cheese plant that is capable of producing 36T of cheese in 24hrs. Plant is still complete and can be viewed if required. Guodpozy Rmrofx Akaog

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Laser on time: approx. 45,500 hours Gsdezcvx Tjpfx Akajug Includes Loadmaster.

Condition: good (used), Masterflex MF 07525-40 L/S Digital miniflex pump Peristaltic pump *New price € 3,308 This compact, stackable pump has a robust ABS housing that is easy to wipe down and keep clean. The Miniflex pump head has a large occlusion angle that prevents fluid backflow up to the nominal pressure of the tubing. Self-lubricating thermoplastic polyester rollers are low friction and durable for smooth operation and long life. Series L/S Type L/S Miniflex Pump head not interchangeable Number of mountable heads 1 Channels 2 Rollers 3 Delivery volume min 0.008 ml/min up to max 324 ml/min Tube ID from 0.8 mm up to 3.2 mm Can be used as a dosing pump yes Godpfxjtt Dxdo Akaeug Can be calibrated yes Analog interface (D-Sub 25-pin w) Operation Membrane keypad with LCD display Housing material ABS plastic, aluminum and vinyl Protection class IP 33 Motor brushless motor Motor speed min 0.1 rpm up to max 300 rpm Change of direction of rotation Yes Open-head sensor Yes Cloud Connected No Anti-Drip Yes Dimensions: 238 × 140 × 157 mm (L x W x H) Condition: used You can find more laboratory devices - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, Panel Laminating Line for AKRYL, PET, PVC, HPL, CPL MASTER PUR-1400 Professional line for single-sided laminating of panels using PUR hot melt adhesive. Application: The machine is designed for laminating: MDF particleboard plywood PVC boards gypsum boards other wood-based materials Supported finishing materials: AKRYL PVC HPL PET Gujdpfx Akjzkmqboaeg CPL decorative paper Technical specifications: Working width: 1400 mm Maximum panel size: 2800 × 1300 mm Panel thickness: 2–40 mm Operating speed: 5–17 m/min Output: 3–5 pieces/min Maximum output: approx. 1200 pieces/8 h Drive power: 21.49 Kw Heating power: 51.7 Kw Line dimensions: approx. 16 × 2.5 × 2 m Required floor space: min. 6 × 22 m Line equipment: feeder with roller conveyor brushing machine for cleaning panels IR oven for preheating the material 3-roller PUR adhesive applicator foil feeding station roller nip press receiving conveyor 208-liter PUR adhesive melting tank Advantages: high surface quality even adhesive application possibility of laminating high-gloss films low adhesive consumption stable operation in serial production

Condition: used, Year of construction: 2006, operating hours: 5,126 h, functionality: unexamined, power: 3,500 kW (4,758.67 HP), overall weight: 43,200 kg, Complete oil-fat-fuelled cogeneration unit. ABC 16VDZC-1000 electric engine, AVK DIG150L-6 alternator. Complete system including supervisory management and all peripherals. The entire installation is still assembled as originally configured and can be inspected. Please contact via email. Guedpfx Aey Hiuqokajg

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Stationary reciprocating compressor with a balanced horizontal configuration. Three-stage, double-acting design with intercooler, crossheads and circulating-water cooling. Capacity: 17.88 m³/min. Discharge pressure: 16 bar. Speed: 721 rpm. Crankshaft power input: 199.4 hp. Serial No.: 21968. Guedozvcfropfx Akasg

Condition: excellent (used), Year of construction: 1992, wood stove biocenter large capacity Good condition Gedpfx Aoxnrypekaoug

Condition: used, Technical specifications: Max. planing width: 530 mm Cutterhead diameter: 120 mm Number of knives: 4 Total length of tables: 2900 mm Table height adjustment Tilting outfeed table Safety switch Power supply: 380 V Motor power: 5 kW Overall dimensions: Length: 2900 mm Gusdpfszia Dxex Akaog Width: 1300 mm Height: 1300 mm

Condition: good (used), For sale is a used TOP MASTER planing machine FS 350 with a planing and thicknessing width of 350 mm. The machine is in good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: Gsdpszltigjfx Akajug - Planing and thicknessing width 350 mm - 3 knife shaft (strip knives) - Planing table length 1800 mm - Thicknessing height 200 mm - Planing table flaps - Drilling support - dust extraction possible The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planing machine, thicknesser, thickness, Felder Reference: R-N3011

Condition: new, Year of construction: 2025, operating hours: 2 h, functionality: fully functional, working width: 400 mm, brushing unit diameter: 210 mm, total length: 1,350 mm, total width: 900 mm, total height: 1,540 mm, height adjustment type: mechanical, overall weight: 500 kg, extraction nozzle diameter: 100 mm, workpiece height (max.): 315 mm, workpiece width (max.): 400 mm, Aging and brushing machine VALMEC Master 400 Specification: Gusdpjuwdb Eofx Akajg • Condition – new • Manufacturer – VAL.MEC • Model – Master 400 • Working width – 400 mm • Max working height – 315 mm • Brush diameter – 210 mm • First brush – steel • Second brush – tynex • Motor power – 2 x 3.0 kW + feed 0.37 kW • Motor startup – 0-1 • Conveyor speed steplessly adjustable via inverter, range 4–12 m/min • Rear brush rotation direction reversible • Independently adjustable height for each unit • Dust extraction outlet – 100 mm diameter • Weight – 500 kg • Complete documentation from the manufacturer • Overall dimensions 135 x 90 x 154 cm (L x W x H) Additional information: • Machine is brand new, in factory condition • The pictures shown accurately represent the actual condition of the item for sale • Machine available within 7 business days

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   Gedpfoziawrox Akajug TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2020, functionality: fully functional, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling Gjdpfozux T Nex Akaeug The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Guodpfszp Nknjx Akajg Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 280 h, load capacity: 1,500 kg, lifting height: 6,600 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Special equipment Gujdpfx Akoyty E Ejajg Load centre: 600 Mast type: Triplex Condition: As new Technical condition: Very good Description: Machine fully workshop-checked, cleaned, UVV and inspection newly carried out!

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction Gsdpfxozt Twye Akaeug 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: repair required (used), Year of construction: 2008, Manufacturer: BECS Master Chiyoda Kogyo Co Gujdpfsrigaiex Akaeg Tip: HWP 501 Year of manufacture: 2007 Max. Tube size 19 mm (1.5 mm wall thickness) The device is currently not working. PLC error

Condition: good (used), Year of construction: 1993, Rotor width 800 mm Gsdpfx Akop H Sv Dsajug 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: used, Year of construction: 2023, operating hours: 1,176 h, 2023 | Rubble Master RM 100GO! | Used Crusher | 1176 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 350000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 88 inspection points 83 approved ✅ 4 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: The Crusher was operating but fell in a error mode , driving and hydraulics work but chrusher part doesnt engaged, problems with clutch sensor chrusher , owner is going to fix this , drivetrain needs to be tensioned and chruser and moving parts needs lubrication, Crusher wear OK no visable welds or cracks on Crusher , not operationally tested 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40910 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Guodpfx Akozk Igqeaeg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, operating hours: 16,000 h, 2012 Intermac Master 33c CNC Gedozi T Uqjpfx Akaeug C-axis (for groove) AND T-axis Bed size 1500x3000mm Selection of cups and tools included This CNC can be used for stone or glass. It was originally used as a stone machine but i use it for glass processing. We have two of these machines, we are replacing this one with a larger Master 38.3, machine in perfect working order and can be seen running in our factory right now. Can show buyer the basics on how to use machine. Can also dismantle and load machine for buyer. Can help out with installation. Have more detailed pictures and videos if required

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. Godpfx Aksz Aibajasug • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.