Used Kasto - Band Sawing Machines for sale (67,659)

Condition: excellent (used), Frietsch SAW MACHINES Purchase and sale of KASTO sawing machines Dear ladies and gentlemen, we buy and sell, recondition, overhaul and paint KASTO - sawing machines. For more than 40 years we have experience with KASTO - sawing machines Nlsdjfh Hukopfx Akfoa and we are specialized in overhauling the machines. The machines are overhauled by skilled personnel according to KASTO factory standards. We are also looking for KASTO sawing machines according to your wishes. for machine overhaul. Good price - performance ratio through professional machine overhaul.

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Nledpfx Asycqhcekfoa Weight 491 kg

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Nlsdpfjy En E Sjx Akfsa Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Nedpfx Aeudim Dskfjla CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment Nlsdpfsmrp Tlex Akfoa 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 400V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Nsdpoy Emgbjfx Akfsla Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Nsdei D Di Sepfx Akfela Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels Nledpfowq A Dyox Akfsa User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, KASTOtec AC 4 Cutting Capacity Round: 430 mm Cutting Capacity Square H x W: 430 x 430 mm Cutting Capacity Flat H x W: 430 x 430 mm Clamping Range: 0 – 430 mm Smallest Workpiece Dimension: 10 x 10 mm Minimum Cut-off Length: 6 mm Shortest Remainder Length in Automatic Operation (only for geometrically flawless surfaces): 35 mm Shortest Remainder Length in Single Cut: 10 mm Dimensions and Weights: Length approx.: 2,140 mm Width incl. chip conveyor: 4,610 mm Height (saw frame lowered) approx.: 2,195 mm Height (saw frame at highest position) approx.: 2,410 mm Material Support Height: 700 mm Total Weight: 4,300 kg Year of Manufacture: 2003 Performance Data: Total Connected Load: 25 kW Saw Motor Power: 15 kW Drive Power at Flywheel: 14 kW Cutting Speed—stepless, 50/60 Hz version: 12 - 120 m/min Automatic Material Feed Length Single: 600 mm Saw Blade Dimensions: 6,830 x 41 x 1.3 mm Nledpfx Ajy Dckmskfea Coolant Tank Capacity: 150 l KASTOtec AC 4 Fully hydraulic high-performance band saw in heavy-duty design Suitable for cutting round, square, flat material as well as tubes and profiles in all grades, especially for tool steels and difficult-to-machine materials such as titanium, Hastelloy, Inconel, etc. Machine Base Torsion-resistant welded construction Saw Unit of steel-mineral composite construction Saw Unit Guidance High-performance sawing technology requires backlash-free and low-maintenance guidance systems. Two vertical square guide columns, one linear guide unit with backlash-free set carriages, as well as two preloaded and adjustable rollers on a guide rail ensure high rigidity and cutting accuracy. Greater machining performance, shorter cutting times, higher blade life, and maintenance-free guide systems with high availability characterize the new KASTOtec. Saw Blade Guidance Side guides by hydraulically preloaded carbide slide guides with quick lift feature for fast blade changes. Back guide by oscillating carbide slide guides. Automatic adjustment of the movable blade guide according to the width of the material to be cut. Material Lift Device After cutting in automatic cycle, the workpiece is moved approx. 2 mm away from the blade on the feed side using the material lift device while clamped (increases blade life). Options for the Machine - Carbide package - Coolant monitoring - Blade tracking - Speed monitoring - Machine lamp - Roller conveyor - CNC control - Special chip conveyor - Carbide package Discharge Roller Conveyor for the KASTOtec AC 4 available in stock, dimensions: 1200 mm long, 500 mm support width, 6 transport rollers

Condition: new, Year of construction: 2026, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Nledoxdbzbjpfx Akfea Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: new, Year of construction: 2026, Automatic and manual operation – continuous operation or trigger control possible Hydraulic arm drop adjustment – ​​smooth feed control without the risk of overload Cutting angle range: -45° to +60° – quick adjustment without disassembling the material Powerful 1500/1100 W motor (2/4-pole) – high performance even with thick profiles 2 belt speeds: 34 and 68 m/min – adapted to the material type Stable construction – 285 kg – zero vibration, high precision Quick clamp vice – quick material changeover in mass production Pump-based cooling system – extended belt life, improved cutting quality Automatic shut-off after cutting 400 V | 3-phase power supply | 50 Hz Motor power 1500 / 1100 W Belt speed 34 / 68 m/min Belt dimensions 2740 × 27 × 0.9 mm Nlsdpfx Aoyi Uq Uokfsa Belt pulley diameter 305 mm Cutting angle range 45°L | 30°L | 15°L | 0° | 15°R | 30°R | 45°R | 60°R Coolant pump 45 W Coolant tank capacity 16 l Net weight 285 kg Noise level 68–71 dB

Year of construction: 2017, condition: used, machine/vehicle number: 6705 104 160, Power: 6 kW, weight: 2,200 kg, 1 roller conveyor, length: approx. 500 cm, 2 heavy-duty dollies, 1 extensive batch of saw bands, various versions, approx. 67 pieces, mostly as new, 1 chair Nsdpfx Asyztd Eekfsla

Condition: good (used), Year of construction: 2019, machine/vehicle number: 562670-08-C, Offer 25488 Technical Data: - Band saw blade dimensions: 3320 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: 15 – 100 m/min - Hydraulic material vice - Mitre adjustable left up to 60°, right up to 45° - Cutting capacity at 90°: - Round: 280 mm - Square: 260 mm - Flat: 330 x 260 mm - Cutting capacity at 45° left & right: Nodpfxoy E Hv Aj Akfola - Round: 250 mm - 45° left, flat: 270 x 200 mm - 60° left, flat: 170 x 170 mm - Drive: 400 V / 2.2 kW - Coolant system - Chip brush - Weight: approx. 1300 kg - Space requirement: approx. W 1800 x H 1900 x D 1950 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Very well-maintained sharpening machine for bandsaws with wet grinding. Blade width from 70 to 400 mm. Blade length from 5.6 to 14 m Tooth pitch from 6 to 75 mm Nlsdsy Eglwopfx Akfoa Feed rate freely programmable from 4 to 39 teeth per minute. Suitable for left and right-hand bandsaw blades without adjustment, including double-tooth blades. Feed and grinding head stroke are individually cam-controlled, allowing reduced feed speed at the tooth base. No complex electronics. Tooth counter. Grinding mist extraction. Deflection rollers.

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Weight: 2.000 kg Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: At10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Nodpfx Asyrpmcokfela VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Weight: 2.000 kg Price: On request - Details: - └ Description: Shaft of the drive rollers is loose with the machine - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) Njdpfxsym Rt He Akfsla - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, Automatic leveling machine for bandsaw blades. For automatic measurement, inspection, and correction of irregularities. Blade widths from 50 to 300 mm. Very well-maintained machine. Low usage. As good as new. Technical data in the PDF file. Nlodpfey A Igwex Akfsa

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight Nlodpfsudi Unex Akfsa 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, Year of construction: 2014, functionality: fully functional, Make and Model: iDEAL BAS 340 Year of manufacture: 2014 Wood saw bands: From 25 × 0.6 mm to 120 × 1.2 mm Bimetal / tungsten-carbide saw bands: From 25 × 0.6 to 105 × 1.65 mm Stainless steel saw bands: From 25 × 0.5 mm to 50 × 0.8 mm Band knives: From 30 × 0.4 to 120 × 1.1 mm Nledpfx Aeyr Idaekfoa Mild steel strip: up to 250 mm² Stainless steel strip: up to 150 mm² Clamping system: hydraulic Nominal power: 45.0 kVA (50% duty cycle) Dimensions (L × D × H): 1214 × 957 × 1982 mm Weight: 800 kg Control system: Central parameter control 99 program memory slots Servomotor-controlled jaw positioning 7-inch color touchscreen USB interface with Password protection Adjustable welding voltage Electronic piece counter Parameter deviation monitoring with automatic stop Hydraulic weld de-burring tool automatic system after welding Graphical annealing process display Infrared pyrometer with LED illumination and protection

Condition: good (used), Year of construction: 2007, machine/vehicle number: 609086, Offer 26074 Hydraulically-operated, double-column-guided horizontal band saw automatic machine Technical data: - Cutting capacity at 90° round: 260 mm - Cutting capacity flat: 260 x 260 mm - Maximum single stroke of material feed: 600 mm - Maximum cut length in multiple strokes: mm (not specified) - Saw band dimensions approx.: 4100 x 32 x 1.2 mm - Infinitely variable cutting speed: 12 - 100 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic material clamping with adjustable clamping pressure Njdpfx Aoyn Ikrskfola - Coolant system - Chip conveyor - Total drive power: 400 V / 8.5 kW - Required space approx.: W 2350 x H max. 2340 x D 3050 mm - Weight approx.: 1900 kg - Infeed roller conveyor: 1500 mm

Condition: new, Year of construction: 2026, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Nledpfx Akov R Tgtjfoa Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60 Z/Pm Njdpoyz Supofx Akfsla Coolant:150-300 l/min Tooth pitch: 10 - 60 mm Tooth height: 6 - 30 mm Tooth angle: 0 - 40° Sharpening speed: 6 - 10 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 2,8 kW E-Motor Water tank volume: 165 liter

Condition: new, Year of construction: 2026, Model: Mechanical or CNC with touch panel Circular saw with stellite or alternate set teeth Sharpening in one pass with a large amount of water!! Tooth profiles: All standard tooth profiles Blade diameter: Circular saw blades up to 1000 mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40° Njdpfxjyz St So Akfjla

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60T/min Coolant:150-300 I/min Tooth pitch: 10 - 60 mm Tooth height: 0 - 30 mm Tooth angle: 0 - 40° Sharpening speed: 0-60 teeth/min Nledpfx Aksyz Srusfea Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 3.0 kW E-Motor Water tank volume: 265 liter

Condition: new, Year of construction: 2026, Model: Mechanical with touch panel Tooth profiles: All common tooth profiles Blade width: Band saws up to 230mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Nljdpfx Akjyz Srbsfja Tooth height: 0 - 25 mm Clamping angle: 0 - 40°