Used Krampitz Tanksystem Gmbh S235Jrg2 for sale (69,964)

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Pgsdpfozw Ukcex Amyor Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Pjdpfozw Ug Rsx Amyegr Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Pgedszw Ucxopfx Amyor Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Psdpfx Amozw A Rwsyjgr Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece Psdpfx Amjzmzbmjyogr The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. Podjzl Rfxepfx Amyegr The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW Pgjdpeznz Ezofx Amyer • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Pgedpfx Amszw Uiljyer Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18

Condition: excellent (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2021-1504-QN, High-end metal separator for inspecting bulk materials in free fall Material: stainless steel 304 Surface: sandblasted Sensing tube material: PE, anti-static, food grade Rejector: single flap type RH Protection rating: IP66 Electronics assembly: detached Control electronics cable length: 3 m Nominal width: 150 mm Orientation: vertical, top to bottom Power supply: 100-240VAC 50-60Hz LNPE - Without power cable Pressurized air supply: 6-10 bar Expected sensitivity: FE: 0.4 mm NE / Al: approx. 0.4 to 0.56 mm Stainless steel: approx. 0.4 to 0.72 mm Electronics outside ATEX Zone Inside: Zone 20 within metal separator (pipe) = II 1 D Ex h IIIC T135°C Da Outside: Zone 22 surrounding metal separator = II 3 D Ex tc IIIC T135°C Dc IP65 Psdpfjzvwlmsx Amyjgr QUICKTRON 07 RH metal separators are used for inspecting powders and granules in free-fall lines. They are available in nominal widths up to 300 mm and can therefore cover all application areas, from the laboratory to truck loading. Their hygienic design and easy cleaning prevent cross-contamination between product batches. Depending on the requirements, they can increase process safety or fulfill the task of outgoing goods inspection. Mesutronic metal detectors use state-of-the-art technology to protect your production, your reputation, and your customers from damage caused by metallic foreign objects. Digital signal processing, combined with innovative evaluation methods, comprehensive self-monitoring, and ease of operation, ensure the optimal function of the system and the successful completion of all types of audits. The devices are complemented by an extensive range of accessories and variants, from multi-frequency technologies to test bodies and material certificates. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or in the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 4110, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,400 mm, overall weight: 11,000 kg, spindle speed (max.): 4,000 rpm, coolant supply: 7 bar, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CMA GRD 4514 The CMA CNC machining center GRD 4514 offers a highly efficient solution for flexible drilling, threading, and milling operations in an extended format. Equipped with a 13.1 kW motor and a spindle speed of 50 to 4000 rpm, the system enables effortless drilling of holes up to 36 mm, as well as the cutting of threads up to M24 (based on ST 40 and HSS-Co cutting insert drills). - Extended work area and travel ranges: Table dimensions: 4500 x 1330 mm (effective machining length X-axis: 4500 mm) Pgsdpfx Ajzuw Eqomysr - Travel ranges X/Y/Z: 4500 x 1450 x 500 mm - Chip conveyor: Directly integrated into the machine table for optimal chip removal Productivity through pendulum operation: Thanks to the generous X-axis travel of 4500 mm, this variant is ideally suited for efficient pendulum operation. You can safely load and unload workpieces on one half of the table while the machine produces uninterruptedly on the other half. Protection is provided on the front side by a dynamically moving laser area sensor on the machine head. Software & Intelligent Control: Graphical programming: Including automatic determination of cutting data and nesting of multiple products, even different ones, on the large table. Collision warning: Integrated protection for maximum process safety. Height correction: automatic measurement and correction of the workpiece height for 100% precise countersinking and reaming. CAD/CAM extension: Optionally, a conversion of 2D/3D drawings directly into DIN/ISO machine programs is possible. Standard equipment of the complete system: - Automatic tool changer for 14 tools - Automatic tool length measurement - Fixed light curtain in the Y-direction (500 mm above the table) and rear protective fence - Powerful coolant system with emulsion - Ethernet connection for fast remote service

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Pedpfxozizkye Amyjgr Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 400-223, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, mount diameter: 40 mm, table length: 2,500 mm, table width: 1,250 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 30,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, tool diameter: 20 mm, number of slots in tool magazine: 30, We offer this used MB-Portatec GmbH basic IIS Portatec basic II.S portal milling machine, manufactured in 2011. Manufacturer: MB - PORTATEC GmbH Type: basic II.S Serial number: 400-223 Year of manufacture: 2011 -Application: Processing of aluminum and plastics from sheets up to 2500mm. -Optional extra: Vertical clamping system. -Accessories: Vacuum pump and extraction system with pre-separator. -MMS system -Programmable vacuum fields If you have any questions or require further information, please feel free to send us a message or call us. Pgedpoy U R Syefx Amyor

Condition: used, Year of construction: 2023, Max. throughput: 156 cartons or 15 pallets/h, max. pallet height including load carrier: 1989mm, max. pallet weight including load carrier: 800kg, equipment: KOCH gantry/axis system with automatic carton and pallet handling, automatic empty-pallet and interlayer handling, product infeed with barcode recognition, extensive product and pallet conveyor technology, automatic pallet wrapping using a Lachenmeier wrapper, automatic pallet labeling by Bluhm Systeme, automatic pallet weighing by Bizerba, several stationary and mobile operator panels, central KOCH system control with remote-maintenance capability, extensive safety and protective equipment, including documentation. The system was only lightly used and has very low operating hours. Pgsdjzwfr Rjpfx Amysr

Condition: used, Year of construction: 2017, functionality: unexamined, R+P Stud Welding Cell Enclosed protective cell made of aluminum profiles Safety enclosure with protective doors Pedpfezvylpox Amyjgr Signal light Integrated control cabinet Documentation available Suitable for automated stud welding processes Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Serial number: 1739289 Part No.: 80-07-57 Technical data: Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Both units were last used together as an automatic stud welding system.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Psdezw T Duepfx Amyegr Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system Pgjdpfezgck Nsx Amysr - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. Pjdpfozqucfox Amyjgr The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Psdezr H Aaspfx Amyegr Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 11H82290, Exercise Book Manufacturing Machine E.C.H. WILL GmbH / Model Alpha RF (manufactured in 2012) For the production of finished exercise books with pre-printed covers Technical Data Mechanical paper web speed/minute: max. 300 m Working strokes/minute – converting section: max. 60 At 4-up production – books/hour: max. 14,400 Reel width: max. 960 mm / min. 580 mm Pgodpszq Av Tsfx Amyer Reel diameter: max. 1,200 mm Printing length (cylinder circumference): max. 670 mm / min. 300 mm Cut-off length – cross cutter: min. 300 mm For exercise book production: max. 500 mm For skid production: max. 670 mm Adjustment steps: 5 mm Number of cuts/minute – cross cutter: max. 1,000 Finished article size range (unbound side x bound side): max. 245 x 480 mm min. 145 x 145 mm Sheet count: min. 5 / max. 50 Article thickness (unfolded): max. 5 mm Main Equipment Reeling Units • 2 x shafted reeling units Ruling Tower • 1 x ruling tower for a maximum of 4 ruling inkers Note: The ruling tower is equipped for either: • 2-color ruling from 1 web, or • 1-color ruling from 2 webs Longitudinal Perforating Unit (for 1 web operation) • 1 x longitudinal perforating unit Cross Cutting Unit • 1 x 1-knife cross cutting system allowing quick and easy knife exchange and adjustment Anti-Static System • Anti-static equipment for paper handling Sheet Overlapping Device • 1 x sheet overlapping device Sheet Counting and Collating Unit • Sheet counting and collating system Cover Feeders (1st / 2nd / 3rd / 4th Cover Feeder) • Will automatic feeder for pre-printed covers Deep Pile Delivery • Deep pile delivery unit, in-line system for collecting large size sheet sections Stitching Unit • Wire size: No. 24–26 • 9 x stitching heads Sectional Folding Unit • 1 x sectional folding unit Square Back Pressing Unit • 1 x square back pressing unit Trimmer • 1 x fore-edge trimming knife • 3 x separating knives • 2 x lateral trimming knives Corner Rounding Device • Corner rounding unit for finished exercise books Book Turning Unit • Book turning station for even stacking Book Stack Discharge • Book stack delivery • Book flipping & title design mixing delivery table (retrofitted) Electrical Equipment • Device for maintaining suitable temperature for electronic components in switch cabinets Pneumatic Equipment • Pneumatic system for machine operation

Condition: used, Year of construction: 2014, Data High-precision CNC lathe: control system Siemens Sinumerik CNC, supply voltage 3~400V 50Hz, total power consumption max. 20 kW Data Chip conveyor 1 (Knoll 320 S-1/140): serial number 543837, year 2013 Pjdpfx Aszwfw Hemyogr

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Podpfxszvnbxs Amyogr Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German

Condition: used, Year of construction: 2003, machine/vehicle number: 59 526 01 579 0010, functionality: fully functional, Vötsch VTU 250/200/125 – Heat and drying cabinet. Pedpfozu Ngajx Amysgr

Condition: excellent (used), Year of construction: 2016, usable tank capacity: 18,000 l, total width: 2,200 mm, total height: 4,500 mm, For Sale: Sourdough preparation and storage set 3x IsernHäger Cooled and insulated stainless steel mixing/storage tank + 1x Diosna Isernhager preparation tank 3x PABST MF6000 stainless steel mixing tank - 6,000 l (2016) - Insulated (IsernHäger) Technical specifications: Brand: PABST Type: MF6000 Year of manufacture: 2016 Capacity: 6,000 liters Pgodezval Ajpfx Amyer Material: Stainless steel Insulation: Yes, fully insulated Manhole: Yes, equipped with an inspection hatch Total height: approx. 4,500 mm (4.5 meters) Tank height (without frame): approx. 2,800 mm Total width/diameter: approx. 2,200 mm Net weight: 1,650 kg Mixing system: Yes, equipped with a built-in agitator Agitator power: 7.5 kW Description: High-quality PABST MF6000 vertical stainless steel storage and mixing tank for sale. These high-quality industrial tanks from 2016 have a capacity of 6,000 liters each and are ideally suited for the food industry, including large-scale bakeries, for the storage and processing of liquid ingredients or dough products. Equipped with a powerful, integrated agitator (7.5 kW) mounted on the top, the tank ensures very efficient mixing and homogenization. The tank is fully insulated to maintain a constant product temperature during processing or storage. Key features: High-quality construction: Made of high-quality stainless steel for maximum hygiene and durability. Powerful agitator: Integrated 7.5 kW motor effortlessly handles fluids with varying viscosities. Full insulation: Excellent temperature control for sensitive ingredients. Easy to maintain: Equipped with an inspection hatch (manhole) on the top for easy access and cleaning. Safe design: Robust vertical construction on heavy-duty legs. 1x IsernHäger Diosna storage tank 1000 syst Brand: IsernHäger Load cells: Yes Manhole: Yes Own weight: 410 kg Stainless steel: Yes Total dimension Height: 2000 mm Year of manufacture: 2016 Type: 1000 syst Agitator power: 5.2 kW Tank diameter: 1300 mm Tank height: 1150 mm It is possible to view these tanks at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors. Pgedpfx Aoztn Sxjmyer

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12399, TSM/tsi rotary vibrating screens are used for the classification, screening, and dedusting of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine offered for sale has a diameter of 1200 mm and is equipped with 3 screen decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare screens with the following dimensions are included: • 1 mm x 1 piece • 0.5 mm x 2 pieces • 0.17 mm x 1 piece • 1.4 mm x 1 piece • 5 mm x 1 piece • 4 mm x 1 piece • 1.8 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet. Pedpfszmzbgjx Amyegr