Used Langzauner Veneer Saw With Planing Unit for sale (37,856)

Condition: good (used), Year of construction: 1979, Veneer saw with planing unit Max. cutting length 3100 mm Kjdpfxewimduj Anujnc Functionally tested

Condition: good (used), Year of construction: 1982, still well-preserved veneer saw with planer unit max. cutting length 3050 mm Knedpeyizztjfx Anujc no rear stop included

Condition: good (used), Year of construction: 1987, Veneer saw with planer unit, connectable with reversible knife planer head. Max. cutting length 3005 mm. With rear finger stop and scale. Knsdpfow U D U Hjx Anuec

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Knjdpfsq Rb Irjx Anuoc cutting length 3100 mm with rear fence

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting length (max.): 3,050 mm, cutting height (max.): 45 mm, type of input current: three-phase, saw blade diameter: 180 mm, rotational speed (max.): 9,000 rpm, input current: 8 A, input voltage: 400 V, milling height: 45 mm, power: 3.7 kW (5.03 HP), input frequency: 50 Hz, number of digital displays: 1, We offer this very well-maintained Langzauner edge, veneer, and panel cutting machine, model LZ 5/2E - 3050. Available in a combined saw-milling version. CE version. Longitudinal design of the tool carriage on hardened and ground guide rails, lifting and lowering of the saw and milling unit is pneumatic, as well as pneumatic saw blade adjustment, adjustment range 2mm, cable guide for the tool carriage in a plastic energy chain, guidance of the unit by compact LM linear guide units. Central control panel directly in the handling area, electronically adjustable feed speed with soft start and rapid return when the tools are lowered, dust extraction channel with connection socket 150mm, prepared for connection to a central or existing dust extraction system. Special accessories: - Parallel rack compensation in the pressure beam. Prevents tilting of the pressure beam. - Movable, front support table 200mm wide - Rear sizing table for veneer processing, size 3050 x 500 mm, with parallel guidance and pneumatic stop lock Knjdpfx Ansz Ikupeusc - Foldable inserts for stop depth 800mm - Digital width display. Quick and accurate setting of the stop depth. Type: LZ 5/2E - 3050 Factory number: 2/4717 Year of manufacture: 1998 Power: 3.7 kW Rated voltage: 3 x 400V + N Rated current: A Frequency: 50 Hz If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head cutting length 3050 mm Kodpfx Anon An A Teusnc with rear support and fence

Condition: good (used), Year of construction: 2003, High-quality veneer saw with planer head for subsequent trimming. Knodpfxszlqbaj Anuec Maximum cutting length: 3050 mm. Equipped with a rear finger stop.

Condition: good (used), Year of construction: 1997, cutting length (max.): 3,100 mm, Veneer saw with saw blade and disc instead of a planing unit. It first saws, and then instead of planing, it mills with a disc (the milling cutters are mounted on the side of a disc). Kedpfx Anjzcc I Uouenc Maximum cutting length: 3100 mm. Equipped with a rear support and finger stop.

Condition: good (used), Year of construction: 1999, Saw with planing head unit Cutting length: 3020 mm Kedpfxsz Hcgnj Anujnc Year of manufacture: 1999 Equipped with a rear support table and stop with positioning indicator Space requirement: 4.78 x 1.56 m

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1999 Features and Technical Specifications: - For cutting all types of veneer - Tight joints and tear-free - Cutting length: 3020 mm - Opening height: 60 mm - Cutting height: 45 mm - Motor: 1.8 kW - Saw blade speed: 8700 rpm - Saw blade diameter: 180 x 16 mm - Includes a planing unit that can be coupled with or decoupled from the sawing unit - Horizontally and vertically adjustable Kedpjzlbtyjfx Anujnc - Joining blade head 85 x 50 mm, with 4 reversible blades - Front support table is adjustable (ball-bush guide) - With front support table and dust duct - Sliding stop from the front via position indicator - Veneer clamping via pressure beam using two external pneumatic cylinders - Rear support table with recessed measuring tapes and stop rail - Dimensions: 4780 x 1560 x 1290 mm - Weight: 520 kg Availability: Immediate Location: 63934 Röllbach

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. Knedpsz Akftjfx Anusc -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Router motor power: 1.1 kW Voltage: 380 V

Condition: excellent (used), Veneer saw with automatic feed Pendant control panel with all the operating elements and displays required for machine control Feed speed adjustable Solid and torsion-resistant machine frame Double profile linear guide system for the saw and rabbeting unit Solid pneumatic pressure beam with rack and pinion compensation Saw and rabbeting unit raises and lowers pneumatically Cutting and rabbeting height continuously adjustable Rabbeting unit with chip extraction device Front support table, pneumatically adjustable (rabbeting position) Rear support table with width stop, stop depth 15 - 600 mm Width stop with handwheel adjustment and digital dimension display on the control panel Central lubrication point with 14 lubrication points Dust extraction duct Tool holder CE incl. saw blade & router tool Cutting length 3700 mm Cutting width 600 mm Cutting height max. 45 mm Working height 850 mm Motor power - saw 2.2 kW Motor power - router 1.1 kW Compressed air 5 - 6 bar Extraction capacity 815 m3/h (at 20 m/s) Extraction connection 120 mm Kedpfx Anez U I Rceujnc Weight approx. 1200 kg Space requirement L x W x H approx. 5200 x 1550 x 1600 mm Note on used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen without any warranty claim. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 21370-07-1268, functionality: fully functional, Available from April 1, 2027, for self-dismantling and self-collection. Kedpsz Dai Ujfx Anusnc Langzauner heating press / veneer press, type LZT 100-SF, manufactured in 2007. The machine is suitable for pressing and gluing sheet materials, veneers, and comparable workpieces. It features heated press surfaces and a hydraulic pressing device. The upper and lower heating elements can be switched on separately. Technical data • Manufacturer: Langzauner • Type: LZT 100-SF • Year of manufacture: 2007 • Factory number: 21370-07-1268 • Heating: upper and lower heating • Temperature display: separate for top and bottom • Pressing time: adjustable • Opening time: adjustable • Automatic opening: available • Electrical connection: 3 × 400 V + N • Frequency: 50 Hz • Rated current: 42.2 A • Connected power: approximately 27 kW according to the nameplate • Hydraulic press with 6 press cylinders • Safety cable / safety device • Press surface heating plates in top condition, no damage • Heating plate size: 3,000 × 1,300 mm • Max. press opening / stage clearance: 400 mm • Total pressing force: 100 tons • 6 press cylinders • Electric heating plates

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) Ksdpfx Ansxb U Txjusnc -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Ksdpfx Asz Eft Ienuonc Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Knodpfjwq D Tpox Anuec Cutting and milling length 3550 mm Cutting height 45 mm Saw motor power 2.2 kW Milling motor power 1.1 kW Extraction channel Workpiece clamping by handwheel Year of manufacture 1978 Price 2800.-

Condition: new, Year of construction: 2026, Holzkraft panel saw with scoring saw Compact panel saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence The cutting plane of the compact panel saw is directly on the sliding table Precision-guided aluminum crosscut fence, anodized as standard Large table extension guided on a telescoping arm and adjustable in length The standard table widening and extension allow for easy work with larger workpieces The large-sized saw unit made of gray cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running, and a long service life Large work table made of ground gray cast iron, making it extremely robust and durable Smooth operation and precise cuts Aluminum crosscut fence Equipped with a tried and tested ball bearing system Dust and dirt resistant due to minimal contact point between the ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guide rails Telescoping fence Extendable aluminum telescoping fence Angle adjustable With two professional folding fences Ek2a0i2ik Parallel fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model SC 2 classic Kedpsih Dwvefx Anujnc Item No. 5504215 Technical data Table dimensions 1020 x 325 mm Table height 900 mm Fence length 1660 mm Cutting height max. 90° with scoring saw 100 mm Cutting height max. 45° with scoring saw 79 mm Rip width max. to the left of the saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Saw blade diameter max. with scoring saw 315 mm Saw blade diameter max. without scoring saw 315 mm Scoring saw blade diameter (optional) 80 mm Main saw blade speed 4000 min-1 Scoring saw blade speed 7600 min-1 Electrical connection 400 V / 50 Hz Motor power 4.0 kW Dust extraction nozzle diameter 120 mm Dust extraction nozzle diameter saw blade guard 60 mm Weight 295 kg Location: In stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 1524/1, Ludy machinery for cutting veneer and producing veneer edging. Suitable for the precise cutting of veneer into strips and for preparing edging for furniture manufacturing. Robust construction, simple operation, ideal for production environments. Knodpfxezg Dpaj Anusc

Condition: excellent (used), Working width: 300 cm Cutting height: 4 cm Knodpfx Aezvn Dgonusc Pneumatic clamp 1.8 kW motor

Condition: new, Year of construction: 2005, Planing machine with infeed device EM 11 Knsdozvvuaepfx Anuoc with 5th spindle at the bottom Includes 5 planing heads.

Condition: ready for operation (used), TETRA THERM ASEPTIC FLEX 10 UHT ASEPTIC MILK PROCESSING YOM 2004 INCLUDING: - TETRA THERM ASEPTIC FLEX 10 PLATE STERILIZER, MODEL TA FLEX 10 PHE PLC ALLEN BRADLEY -TETRA ALEX 30 HOMOGENIZER, 2-STEPS, NON-ASEPTIC CAPACITY 8 TONS PER HOUR Ksdjz Dpuyopfx Anujnc EXCELLENT CONDITION LOCATION - POLAND

Condition: ready for operation (used), Year of construction: 1980, Mayer FS 3 Veneer saw Cutting length: 4000 mm Front and rear support tables Knsdpfsyh It Rjx Anuoc Extraction duct

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Kedpjvwf Agofx Anuonc

Condition: excellent (used), Year of construction: 1999, STRIEBIG III TRK scoring unit In wooden box Kedpfxovluwvj Anusnc Can be retrofitted to a Striebig Standard TRK Location: from stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding belt length: 3,000 mm, grinding belt width: 150 mm, table height adjustment: 180 mm, input frequency: 50 Hz, Langzauner LZK 3/4 oscillating edge sanding machine, with veneer edge sanding attachment and feed console Sanding unit adjustable from 0-45° Oscillation Miter stop Height-adjustable sanding table (180 mm) for utilizing the full width of the sanding belt Table size (front) 1000 x 350 mm Table size (side) 400 x 250 mm Connection power 4.6 kW Belt length 3000 mm Belt width 150 mm Kodpfx Ansz D Autsujnc Belt speed 22 m/s Weight approx. 350 kg Space requirement 1770 x 730 mm Year of manufacture 1997 Condition: Functionality tested