Used Light Receiver for sale (20,813)

Condition: good (used), Light receiver, limit switch, push button, fuse switch, position switch Price: per piece Nedpjb A Nt Iofx Akmodc -Quantity: 8x Available -Weight: 0.3 kg

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: grey, gearing type: automatic, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Optional equipment: A50 Front axle with increased load capacity, BH1 HOLD function, CK8 Steering wheel heating, CL3 Leather steering wheel, CM0 Painted bumpers, EY2 Digital extra: Live Traffic Information, E1E Digital extra: Hard disk navigation, E43 Trailer socket 13-pin, FF0 Coat hooks in the passenger compartment, FG8 Cupholders front, FJ5 Folding cover for storage compartments left and right, FM3 WET WIPER SYSTEM, FY7 Multi-button remote control, G43 9G-TRONIC, H04 Thermal insulation driver's cabin, H08 Reinforced roof air conditioning, H12 Hot water auxiliary heating, H13 Additional heater for the rear, H15 Seat heating for passenger, H16 Seat heating for driver, H21 Heat-reflecting glass with band filter on the windshield, JA9 Traffic sign assistant, JB7 Parking package with rearview camera, LB9 Exit lights, LG7 LED High Performance headlights, L1D Roof control unit with bus interior light control, L22 Rear lights with partial LED technology, M61 Generator 14 V / 280 A, P3Z Winter package Plus, RH2 Tires 235/65 R16 C, SB2 Comfort passenger seat, T55 Electric actuation for sliding door on the right, U26 Pre-installation for seat configuration 2/2/3, U60 2-seater bench seat in the 1st row in the rear, U61 2-seater bench seat in the 2nd row in the rear, U64 3-seater bench seat in the 3rd row in the rear, U74 Armrests on wall side, U75 Armrests on aisle side, VA5 Full paneling of rear swing doors, V21 Interior paneling luxury, V31 Window pillar paneling, V4A Full paneling of right rear sliding door, W70 Tinted glass in the rear, black glass Njdpfozwlqaex Akmodc Standard equipment: AR2 Axle ratio i = 3.923, BA3 Active brake assist, CB1 Suspension for comfort and cargo protection, CB7 Stabilization level I, CL1 Steering wheel adjustable in inclination and height, CN2 Radiator grille frame in vehicle color, CT1 Vibration damper, CW2 Deletion of vehicle lowering, C6L Multifunction steering wheel, D03 High roof, ED4 Fleece battery 12 V 92 Ah, ES0 Jump start assist, ES2 12 V socket in trunk / cargo area, ES5 Charging package dashboard, EW6 Digital extra: Remote Services Plus, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, E07 Hill start assist, E1D Digital radio (DAB), E1U USB socket 5 V, E30 Battery main switch single-pole, E4S Digital extra: Smartphone integration, E7M MBUX multimedia system, FF5 Storage compartment above windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under cockpit, F61 Interior mirror, F64 Exterior mirror electrically foldable, F68 Exterior mirror heated and electrically adjustable, HH2 Electric auxiliary heating with warm air, HH9 Semi-automatic controlled air conditioning TEMPMATIC, H00 Warm air duct to passenger compartment, H1I Wide-angle nozzles in I-panel, H22 Heated rear window, JA7 Blind spot assist, JA8 Crosswind assist, JB4 Active lane keeping assist, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JK8 Driver camera, JW8 ATTENTION ASSIST, J10 Speedometer km/h, J55 Seatbelt warning for passenger seat, J58 Seatbelt warning for driver's seat, J65 Outside temperature display, KB7 Main fuel tank 93 liters, LA1 High beam assist, LA2 Headlamp assist, LB1 Lateral marker lights, LB5 3rd brake light, LC4 Comfort roof control unit, LE1 Adaptive brake light, L21 Reversing ligh

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Nedpfszy Np Ejx Akmodc Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Ndodpfx Aszlqvwskmjc Latest generation IE-3 motors Spindle and feed brakes CE

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Ndjdpfxozrt Ivj Akmjc Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: like new (used), Like-new batch of components from TELCO Sensors for Sitron. Consisting of the following types: Telco PA 11 A 300T light barrier amplifier Telco PA 11 A 300T light barrier amplifier Ndjdpfxozzpn Re Akmjc Telco LR 100L TS38 15 light receiver Telco LR 100L TS38 15 light receiver Telco LT-100 HL-TS 38-15 light transmitter

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Ndsdpjy Sumvefx Akmjc Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights Ndsdpfx Ae Adxg Sokmjc 1 LED work light inside at the front All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump body: interior fully welded Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Ndodpsy Sup Dofx Akmoc Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65

Condition: new, height / mm working width / mm distance to reflector / mm SICK DETEC 4 CORE safety light curtains C4C-SA09010A10000 + C4C-EA09010A10000 / NEW Nsdpfx Akoyn R R Iomodc Transmitter: C4C-SA09010A10000 Ident No.: 1211475 Receiver: C4C-EA09010A10000 ID No.: 1211515 Condition: New

Condition: new, height / mm working width / mm distance to reflector / mm SICK safety light curtains C4000 C40S-1301AA030 + C40E-1301BH030 Ndedpfxoymqrvo Akmec Transmitter: C40S-1301AA030 Receiver: C40E-1301BH030 Operating range: 0 - 5 m Condition: New

Condition: used, SICK Safety Light Curtain C40S-1301AA030 + C40E-1301BH030 Ndsdpfxozcw Dws Akmoc Manufacturer: SICK Condition: Used, good condition Type: Safety Light Curtain Transmitter: C40S-1301AA030 Receiver: C40E-1301BH030 Product series: C4000 Protective field height: 1350 mm Resolution: 30 mm Safety category: Type 4 according to IEC 61496 Protection class: IP65 Connection type: M12 connector Supply voltage: 24 V DC Application area: Personnel protection on machines and automated systems Quantity available: 4 pieces

Condition: used, SICK Safety Light Curtain C40S-1001AA030 + C40E-1001BH030 Manufacturer: SICK Condition: Used Type: Safety Light Curtain Transmitter: C40S-1001AA030 Receiver: C40E-1001BH030 Product Series: C4000 Protective field height: 1050 mm Resolution: 30 mm Safety category: Type 4 according to IEC 61496 Ndedpfx Aezcw S Uskmjc Degree of protection: IP65 Connection type: M12 connector Supply voltage: 24 V DC Application area: Personnel protection on machines, production systems, and automated production lines Feature: Non-contact safety device

Condition: used, Light barrier, safety light curtain , Reflective light barrier, light barrier, safety light curtain, reflective light barrier, photoelectric sensor, light sensor, light grid -Manufacturer: Telco, light grid Sitrans Alpha receiver bar R8-K32-46-A45-G71-S1-R 2 pieces Ovp .: 0479412290 Stadler ID 6130729 -Quantity: 79 boxes available -Price: per box -Box dimensions: Ø 67 x 1755 mm -Weight: 3.1 kg/carton Nedpfxsr Htnnj Akmodc

Condition: new, New safety light barrier from REER. The original packaging was only opened for taking photographs. Manufacturer: REER Product series: EOS4 Ndsdpezcgzrjfx Akmoc Type: EOS4 301A Device type: Safety light barrier Scope of delivery: Transmitter (emitter) and receiver Number of light beams: 1 Safety category: Type 4 Performance Level: PL e Safety level: SIL 3 / SILCL 3 Protection class: IP65 / IP67 Connection: M12 connector Restart: Automatic

Condition: good (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 550 mm, overall weight: 500 kg, Pressta Eisele Profilma 501 Circular saw machine for aluminum and plastic profiles – ideal for series production with high volumes and precision requirements. Designed for 550 mm saw blades. The powerful 7.5 kW motor, in combination with the hydropneumatic saw feed (cutting from below), ensures fast and clean cuts. The cutting height is adjustable. Six pneumatic clamps (horizontal and vertical) with individually adjustable clamping pressure guarantee secure hold for delicate profiles. The stationary base frame (working height 980 mm), the manually opening protective cover, and the saw blade housing integrated under the table provide a high level of operational safety. Minimum quantity lubrication system with a 1-liter lubricant tank including level control. Max. cutting range: – Profile height: up to 140 mm – Profile width: up to 270 mm Ndjdpfxsz Hzago Akmjc – Round material: Ø 180 mm Technical data: – Weight: approx. 480 kg – Dimensions (W x D x H): approx. 170 x 148 x 155 (192) cm - Year of manufacture: 2006

Condition: used, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (please call ). Polyma LA0400185T68W lighting mast trailer Rated power: 18 kVA / 14.4 kW / 26 A, operating hours: 6,367 h Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved!!! - = Further information = Nedpfx Aeyxadgjkmodc Year of manufacture: 2007 Unladen weight: 1,660 kg Payload: 40 kg GVW: 1,700 kg Please contact Tobias Ebert for further information.

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message. Ndjdpfx Aozzp Epskmjc

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Nodpfozy Upkjx Akmodc Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 316792, total length: 2,700 mm, total width: 1,450 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,500 kg, Equipment: documentation/manual, Kaltenbach SKL452 NA including ESTA DUSTOMAT – Year of manufacture 2023 We are offering our Kaltenbach SKL452 NA including ESTA DUSTOMAT for sale. We purchased the machine directly from Kaltenbach as a new machine in 2023 and have since used it in the metalworking department of our WfbM (workshop for people with disabilities). The machine was used exclusively for cutting aluminum profiles. Nedpfxsz H Sgdj Akmedc It was operated in a single-shift system with a maximum of approximately 6 hours of machine runtime per day. The machine can be inspected on-site after prior arrangement. Collection / Transport The machine is offered for sale exclusively at our location. Dismantling, loading, and transport must be organized and carried out by the buyer. If you are interested or would like to arrange a viewing appointment, please contact us.

Condition: good (used), Light barrier, safety light curtain -Manufacturer: Telemecanique, light barrier type XUSF -Transmitter/Receiver: Type XUSF069210 Ndjdpfx Akoyx Dncjmjc -Protection field height: 1025 mm -Voltage: 115/230 V -Submission/Price: complete -Dimensions: 1130/235/60 mm -Weight: 13.1 kg

Condition: ready for operation (used), For sale: a conveyor belt with a length of 7 meters, ready for operation. ✅ Length: 7 m ✅ Belt width: 0.6 m ✅ Transport can be arranged Ndsdpfs Afpxbox Akmec ✅ Large selection of conveyor belts available on site Please contact us. We will help you select the right conveyor belt for your needs.

Condition: used, Year of construction: 2011, functionality: fully functional, SEMI AUTOMATIC CASE MAKER MACHINE DARIX EVOLUTION LIGHT Ndodpfxow Inytj Akmec

Condition: like new (used), IFM Safety Curtain Set Transmitter & Receiver Type OY038S Length 1250mm In as new condition Nodouthmpjpfx Akmjdc

Condition: used, axle configuration: 3 axles, first registration: 05/2004, color: other, Year of construction: 2004 Empty weight: 4.740 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Ndodpfx Akeynhvzsmoc We have the possibility to stack trailers!