Used Llc Evolutioner Metal Siding "Soffit" Roll Forming Line for sale (64,421)

Condition: new, Year of construction: 2024, Soffit panel roll forming line was designed by our company to produce wall soffit panels with different lengths. Line has automatic system so you can put length of panels and numbers you need and machine will produce it in automatic mode and cut it automatically. Machine has special cutting shear to cut panels as well. Line can be equipped with manual or automatic decoiler as an option. So it can be effective solution for soffit panels production Lajdpfx Ajrqg U Dspdsg

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dimensions (mm) 6650x1200x1600 Lasdpfxewwip Ao Apdeg Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 Lasdpfxoxghnge Apdeg The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: TEL-178600-558-98, working width: 1,250 mm, The production line was fully operational until it was dismantled. It was taken out of service solely due to a production upgrade/change in manufacturing technology. The machine is currently dismantled and prepared for transport; therefore, a live demonstration is not possible. Prior to dismantling, the line operated without any issues and was regularly maintained. We offer two complete roll forming lines for sale, available either individually or as a package. Manufacturer: SAMESOR Year of manufacture: 1998 SERIAL: TEL-178600-558-98 Lasdpszmzhmefx Apdjg Manufacturer: AJV-MACHINE Year of manufacture: 2006 SERIAL: AJV24/1100-169

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Laedpfx Aeymzzuopdog Width: 260 mm

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: Ledpfx Apjtp H Erjdsag The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Laedpfxezx Rz He Apdog Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: refurbished (used), ROLLFORMING LINE Laedpfxeg Rkv Eo Apdsg

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. Lodpeuzv Tzofx Apdsag As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE 11 STATIONS WIDTH: 450 mm FULL OVERHAUL Lajdpfx Aey Rxzhopdjg

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses Laodpfxeztwx Ue Apdog arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: excellent (used), Roll former- Trapez T35/196 Input coils: 1000 mm, 1250mm Output: 1000mm thickness: 0.30-0.70mm 27 stations. Lajdpfxjzycn Is Apdog

Condition: excellent (used), sinus profile 15/75 Laedpfx Apozyytuedjg input : 1000mm only output: 830 mm work automatically, with cutting scissors.

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Lasdpfezrnxcox Apdog Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. Lajdpfxszzyd Ne Apdjg According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: repair required (used), Year of construction: 2007, Roller profiling line for manufacturing profiles for dry construction, without a hydraulic unit. Lasdpfxszy Ekfe Apdjg Location: In our workshop.

Year of construction: 2026, condition: new, Customized roll forming production lines for standard and special steel profiles with turnkey automation solutions. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. Our custom roll forming lines are designed for serial production of sheet metal profiles directly from coil with high precision, repeatability and production efficiency. We manufacture complete lines according to customer profile drawings, production targets and automation requirements. From standard profiles to fully customized sections, Bosporas provides turnkey roll forming solutions including coil feeding, punching, forming, cutting, stacking and automation systems. The systems can be equipped with advanced technologies such as quick cassette change, flexible punching systems, automatic width adjustment and servo-controlled feeding solutions. ⚙️ PROFILE TYPES & INDUSTRIES We manufacture roll forming lines for a wide range of industries and applications, including: Highway Guardrail Production Lines Acoustic Noise Barrier Production Lines Solar Framing & Mounting Profiles C, U and Z Profiles Cable Tray & Cable Ladder Profiles Logistic Warehouse Traverse Profiles Market Shelving Systems Suspended Metal Ceiling Profiles Ledpfoy Anxaex Apdoag Solar Framing & Mounting Profiles Lighting Fixture Body & Lid Profiles Panel Radiator Top & Side Covers Metal Grid & Industrial Profiles Metal Door & Door Frame Profiles PVC Window & Gypsum Board Profiles Vineyard / Orchard Posts Agricultural Equipment Components Automotive Industry Components Painting Plant Panel Profiles Household Appliance Components Coil Punching Applications Customized Special Profiles ⚙️ ENGINEERING FEATURES Custom machine design based on profile drawing High precision roll tooling design Servo-controlled feeding systems Quick cassette change options Automatic width adjustment options Flexible punching and perforation solutions Heavy-duty machine construction Modular design for future upgrades ⚡ OPERATIONAL ADVANTAGES Complete turnkey production solutions High efficiency serial production from coil Consistent product quality Reduced labor and production costs Flexible solutions for different industries Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Construction industry Storage & logistics systems Solar energy sector Agriculture sector Automotive suppliers White goods industry Metal furniture systems Infrastructure projects General sheet metal manufacturing 🧩 OPTIONAL CONFIGURATIONS Fully customized profile design High-speed punching systems Automatic width adjustment Quick cassette change systems Special tooling packages Turnkey factory integration solutions

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. Lasdpfxjn Hqmms Apdeg - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: excellent (used), round Gutter. fi100 Lajdpfjzyytnjx Apdjg input material 333mm dx53d quality of material automatic cutting machine works with air

Condition: excellent (used), Tile Imitation T-40/350 input coil: 1250mm output : 1114mm Lsdpjzyytbofx Apdsag auto stacker 16 stations.

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. Laodpfx Apsrklxvedjg We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS WIDTH: 450 mm Laodpfx Aeymzxyopdeg

Condition: excellent (used), round gutter roll forming line: 14 stations. manual de-coiler, precutting. automatic measurement. Dx53d quality working. input 333mm Lodpfx Aszyythspdjag

Condition: excellent (used), functionality: fully functional, We offer this very good FACADE PANEL ROLL FORMING machine. Input: 420mm Laodpfx Apszyclmjdjg output: 310mm Decoiler, 16 stations, automatic cutting.

Condition: excellent (used), Roll Former- Trapez t18/120 input coils; 1000mm ; 1250mm Lodpfx Aozyyq Hopdjag output: 835mm/1085mm thickness:0.3-0.70mm 20 stations