Used Loewer Dsm 2004 for sale (1,123)

Condition: excellent (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Dcodpfx Aevu Hgbedrsk Equipped with the following special options: -----...

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder Dsdpfx Adjvnv Tqsreck constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, Löwer Type KS 225 three-dimensional, swivelling edge sander for the precise sanding of straight and curved wooden edges. Its lightweight construction and powerful motor ensure a uniform finish with high material removal rates. Ideal for small joinery workshops, furniture making and interior fit-outs. Technical data: Dedszryx Ispfx Adreck - Applications: Horizontal edge, horizontal flat or vertical bevel. - Sanding belt width: 150 mm - Swivels: 90° - Motor power: 1 kW

Condition: used, Measurement data acquisition device, test device, communication system, data acquisition system -DSM: Nanoserver 96M1566L -suitable for: mobile applications -Input: 8-30 V DC, 15 A -Dimensions: 245/220/H120 mm -Weight: 2.8 kg Dcsdpfeff Nmbsx Adrek

Condition: excellent (used), Here we offer a fastening system. Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: used Scope of delivery: (See image) Dcodpfxszgabfe Adrek (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2788, Cut-off saw, diameter 300 mm Milling spindle, diameter 40 mm Sliding table with Festo length stop Dcjdpfxjiau I So Adrjk Dust extraction port for saw, 120 mm Dust extraction port for milling machine, 140 mm Cable + plug, 16 amps Without operating tools Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: used, Year of construction: 1998, Technical details: total power requirement: 0,16 kw dryer Buran Buran DSM, YOM 1998; capacity 0,16kW, possible pressure 16bar, Filter-Ultramat Typ AG 0009, with internal safety against overpressure - with oil separator Dcsdpeu Nzxfofx Adrsk *

Condition: used, machine/vehicle number: 008349, Max. machining width: 1300 mm Min. machining thickness: 100 mm Dcjdpfx Aox A Tfisdrok Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: good (used), Year of construction: 1999, - Maximum sanding width (mm): 390 - Maximum sanding height (mm): 390 - Sanding pad from above: 1 - Sanding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Conveyor belt: for material feed - Feed speeds (m/min): 6/11/16 - Extraction connection diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation Dcjdpfx Adsy Avzverok - Pneumatic sanding belt tensioning - Special HBS sanding shoe: for contour sanding with thickness variations up to 4 mm or warped workpieces - Selector switch for contour sanding / calibrating - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness sensing - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant

Year of construction: 2016, condition: ready for operation (used), Table dimensions X/Y/Z: approx. 1400mm/800mm, grinding wheel diameter: 150mm, spindle speed: 2000rpm, swivel range: 180°, machine dimensions X/Y/Z: approx. 1600mm/1300mm/1750mm, weight: approx. 400kg. An on-site inspection is possible. Dcedpfjynluhex Adrjk

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: Dedsx A Unxepfx Adrsck - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 14344, General The DiscMaster 4TD is equipped with four rotating discs that oscillate across the entire workpiece width. With its disc-only technology, the machine offers exceptionally low operating costs. The combination of rotation and oscillation delivers outstanding results, and the wide range of available disc tools makes the machine extremely versatile. Dedpfx Adeyywr Dsrsck Two disc units on the infeed side, two disc units on the outfeed side Oscillation over the entire conveyor belt width Processes edges and cut-outs precisely from all directions and angles, delivering true 360° finishing through the overlay of rotation and oscillation Consistent tool wear, regardless of the workpiece’s placement on the conveyor belt Easy and quick tool change for mixed materials, as only four tools need to be changed Versatile applications due to the vast array of available options Deburring and edge rounding of punched parts as well as waterjet, laser, or plasma-cut sheets in a single pass Deburring and edge rounding of 3D punched parts Edge rounding and oxide layer removal in a single operation Edge rounding and eccentric finishing in one step Processing of small parts from 20mm diameter Processing of coated or galvanized sheets Processing of steel, stainless steel, and aluminum…

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Dedetrhv Sepfx Adreck Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Dcsdpfx Adsxl Tp Tsrjk Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons Distance between tie bars: 475 x 475 mm 2 x core pullers on movable platten Dedpfxexd Sz Es Adrsck \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)

Condition: good (used), Year of construction: 2004, Demag ergotech extra 500-200 (2004) Dcodeyyzuvepfx Adrjk

Condition: excellent (used), Year of construction: 2004, Hotrunner external 3 zones/ possible 6 zones Dcodpouykpuefx Adrsk

Year of construction: 2004, condition: good (used), Laservall KUBO100 Tempering Unit (2004) The Laservall KUBO100 is a compact, fiber-delivered pulsed Nd:YAG welding system often utilized for precision laser welding and micro-welding applications. It is frequently featured as part of the Master Kubo Series from Laservall S.P.A. (Italy), designed for high-precision manufacturing, often in industrial settings. 1. System Type: Pulsed Nd:YAG laser welding system (sometimes referred to as a welding microscope or workstation). 2. Applications: Ideal for precision welding, micro-welding, and repairing, often used on mold tools. Dodpfx Adou Aqr Isreck 3. Key Features: Offers high-precision welding capability, often integrated with a microscope for detailed work. 4. Manufacturer: Laservall (Italy). 5. Model Variants: Units often feature 2004 or 2009 manufacturing dates in second-hand markets. It is important to differentiate the KUBO 100 welding system from similar names, as some listings in industrial marketplaces may confuse it with a "tempering unit" or cooling accessory, but the primary identification is as a specialized welding

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Dodpfxsxqx Ave Adreck Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Dodpsu Dbkdjfx Adrsck Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: used, Year of construction: 2004, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes Dcsdpfxjyy Nnqe Adrek - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2004, Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels. Accessories: Dcsdpfxew I Sk Ns Adrjk Total enclosure, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511, Device for automatic chamfering of sawblades from Ø 145 mm, Automatic threading of the grinding wheel, Automatic fire extinguishing system, Automatic central lubrication, Coolant system 400 L with coolant tank with filter system, Machine lamp, Oil collecting tray, 3 sawblade mandrels (loader). Saw diameter: 40-710mm Tooth pitch: 1 - 55mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200x32mm Connected load: 10kW (400V / 50Hz) mass: about 3200 kg Dimensions: L x W x H = 1198 x 1750 x 2015 mm colour: blue/grey RAL 7047 / blue RAL 250-50-20.

Condition: used, Year of construction: 2004, ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece. The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material. Dodpfx Adeyzt T Tjrock Power (Ton): 30 Number of rollers: 2 PLC: YES

Condition: used, Year of construction: 2004, 3200mm carriage Electric tilting blade electric cutter Dcjdpfxozqg Rus Adrjk Digital display Blade diameter 350mm 380V

Condition: used, first registration: 08/2004, color: other, Year of construction: 2004, Axle 1: left 5 mm right 3 mm Dsdpfx Aezrnk Ssdrsck Axle 2: left 6 mm right 5 mm Axle 3: left 6 mm right 6 mm