Used Loewer Hbs400Ubt for sale (12)

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm Pjdpfex A Unxox Abpera - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 8101, Löwer Keyway Cutting and Slotting Machine Year of manufacture: 1992 40 mm spindle Podpfx Ajzvhgusbpora plus associated Leitz Fenstersatz IV68/56 40 mm bore Pick-up price – delivery possible upon request. The sale is made excluding any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 14344, General The DiscMaster 4TD is equipped with four rotating discs that oscillate across the entire workpiece width. With its disc-only technology, the machine offers exceptionally low operating costs. The combination of rotation and oscillation delivers outstanding results, and the wide range of available disc tools makes the machine extremely versatile. Two disc units on the infeed side, two disc units on the outfeed side Psdsyywr Dspfx Abpera Oscillation over the entire conveyor belt width Processes edges and cut-outs precisely from all directions and angles, delivering true 360° finishing through the overlay of rotation and oscillation Consistent tool wear, regardless of the workpiece’s placement on the conveyor belt Easy and quick tool change for mixed materials, as only four tools need to be changed Versatile applications due to the vast array of available options Deburring and edge rounding of punched parts as well as waterjet, laser, or plasma-cut sheets in a single pass Deburring and edge rounding of 3D punched parts Edge rounding and oxide layer removal in a single operation Edge rounding and eccentric finishing in one step Processing of small parts from 20mm diameter Processing of coated or galvanized sheets Processing of steel, stainless steel, and aluminum…

Condition: used, Year of construction: 1999, Number of grinding stations: 1 Maximum workpiece cross-section: 390 x 390 mm Grinding belt dimensions: 400 x 1800 mm Length: 1150 mm Width: 1120 mm Weight: approx. 1020 kg Dust extraction connection diameter: 2 x 150 mm Psdpfxjzvn I Es Abpsra Storage location: Supplier

Condition: used, Year of construction: 1998, - Belt width: 300 mm Pedpfx Abjzuzbiepsra - Belt length: 1800 mm - Max. working height: 200 mm - Feed rate: 6 / 11 / 16 m/min Sanding machine Manufacturer: Löwer Type: DSM 3000 Year of manufacture: 1998 Dimensions, space requirements and weight Length: 2660 mm Width: 1020 mm Height: 1890 mm Space requirement: (for operation, tool changes, maintenance) Length: 2660 mm + 2 x workpiece length Width: 2100 mm Height: 2000 mm Weight: 1600 kg Technical data Belt width: 300 mm Belt length: 1800 mm Max. working height: 200 mm Sanding motor - Rated power: 2 x 7.5 kW Sanding motor - Rated current: 2 x 15.4 A Sanding motor - Speed: 2870 rpm Feed motor - Rated power: 0.25 / 0.55 / 1.0 kW Feed motor - Rated current: 1.0 / 1.9 / 2.6 A Feed motor - Speed: 700 / 950 / 1420 rpm Belt speed: 1300 m/min Feed rate: 6 / 11 / 16 m/min Brush motor - Rated power: 2 x 0.37 kW Brush motor - Rated current: 2.1 A Brush motor - Speed: 1405 rpm Brush length: 290 mm Brush diameter: 120 mm Height adjustment motor - Rated power: 0.37 kW Height adjustment motor - Rated current: 0.81 / 1.15 A Height adjustment motor - Speed: 600 / 2680 rpm Extraction Connection size: 2 x = 150 mm 2 x = 120 mm Airflow: 2515 m³/h Minimum air velocity at the machine connection: 20 m/s Negative pressure at the extraction port: 889 Pa Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2016, condition: ready for operation (used), Table dimensions X/Y/Z: approx. 1400mm/800mm, grinding wheel diameter: 150mm, spindle speed: 2000rpm, swivel range: 180°, machine dimensions X/Y/Z: approx. 1600mm/1300mm/1750mm, weight: approx. 400kg. An on-site inspection is possible. Psdpfoynluhex Abpjra

Condition: good (used), Year of construction: 2010, machine/vehicle number: 11176, Offer 25439 Technical data: - Abrasive diameter: 150 mm - Swivel head – grinding unit pivotable and tiltable on articulated arm - Dust drawer - Disc speed infinitely adjustable Prsdpfx Absyapx Uopea - Table dimensions: 1400 x 980 mm - Table height approx.: 870 mm - Drive: 400 V / 0.75 kW - Pneumatic connection: 6 bar - Space requirement approx.: W 1700 x H 1700 x D 1300 mm - Weight approx.: 400 kg

Condition: used, machine/vehicle number: 008349, Max. machining width: 1300 mm Min. machining thickness: 100 mm Working Table: adjustable Vacuum feed belt: yes Pedpfx Asx A Tfijbpjra No. Operating units: 3 Nr

Condition: good (used), Year of construction: 1999, - Maximum sanding width (mm): 390 - Maximum sanding height (mm): 390 Prodpfx Asy Avzvobpsa - Sanding pad from above: 1 - Sanding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Conveyor belt: for material feed - Feed speeds (m/min): 6/11/16 - Extraction connection diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic sanding belt tensioning - Special HBS sanding shoe: for contour sanding with thickness variations up to 4 mm or warped workpieces - Selector switch for contour sanding / calibrating - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness sensing - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant

Condition: used, Löwer Type KS 225 three-dimensional, swivelling edge sander for the precise sanding of straight and curved wooden edges. Its lightweight construction and powerful motor ensure a uniform finish with high material removal rates. Ideal for small joinery workshops, furniture making and interior fit-outs. Technical data: - Applications: Horizontal edge, horizontal flat or vertical bevel. Predpfxezryx Is Abpea - Sanding belt width: 150 mm - Swivels: 90° - Motor power: 1 kW

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2788, Cut-off saw, diameter 300 mm Psdpfx Aoiau I Ssbpjra Milling spindle, diameter 40 mm Sliding table with Festo length stop Dust extraction port for saw, 120 mm Dust extraction port for milling machine, 140 mm Cable + plug, 16 amps Without operating tools Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: new, Number of sanding units 1 st. sanding width 150 mm Sanding height max. 150 mm Loewer edge finishing machine MiniSpin N ----- Machines for finishing and fine sanding of Podpfjxmk Ayex Abpsra Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush