Used Maschinplex Visomat Iv for sale (1,807)

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc. Hedpfx Aozgdc Hebhjp

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel Hedpfjy Tu Rwsx Abhjp – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION Hodpfxsywcr Do Abhjp used visually in good condition

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: YAM0035, power of the servo motor: 1,200 W, input voltage: 230 V, clearance between the columns: 80 mm, type of input current: AC, throat depth: 150 mm, feed length X-axis: 30 mm, feed length Y-axis: 85 mm, feed length Z-axis: 12 mm, pneumatic connection: 10 bar, AMF REECE ATLAS Mark IV Automated Waistband Machine (2020) Modern High-Speed Production System – Video Ready Category Description For sale is an AMF Reece Atlas Mark IV automated industrial sewing unit, manufactured in 2020. This is a modern programmable production system designed for high-precision and repeatable garment component manufacturing. This is not a standard sewing machine but a fully automated unit capable of executing pre-programmed sewing cycles with high accuracy and consistent quality. The machine has been used in a professional garment production environment and is offered as a complete industrial workstation. Year 2020 Modern digital control system Production-ready configuration Key advantages Modern generation machine with low mechanical wear Fully programmable sewing operations High repeatability and precision Suitable for continuous industrial use European-built unit with strong parts availability Key features Programmable automated sewing cycles Integrated touchscreen control interface Pneumatic-assisted operation High precision stitch control Stable heavy-duty construction (Kessler base) Designed for continuous production environments Fast changeover between sewing programs Includes AMF Reece Atlas Mark IV machine unit Integrated control system with touchscreen Pneumatic components Industrial table and Kessler base Thread holders Technical details Manufacturer: AMF Reece Model: Atlas Mark IV Year: 2020 Serial number: YAM0035 Power supply: 230 V, 1-phase, 50/60 Hz Power output: 1.2 kW Current: 8 A Origin: Czech Republic CE marked Pneumatics required Condition Used industrial condition From professional production environment Typical signs of use Sold as-is, where-is, without warranty Inspection possible before purchase Applications Belt loop operations Pocket attachment Hedpfx Ajy Nd Ukjbhop Denim component sewing Workwear production Automated garment part manufacturing Repetitive precision sewing operations Location Valga, Estonia Logistics Buyer responsible for dismantling and transport

Condition: used, Year of construction: 1954, machine/vehicle number: 6315, Roll diameter 200 mm, coolant device and machine lamp Hsdpfx Ajy Sqi Tobhep

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,052 h, load capacity: 15,000 kg, lifting height: 3,180 mm, fuel type: diesel, mast type: simplex, construction height: 2,940 mm, fork carriage width: 1,700 mm, fork length: 1,100 mm, empty load weight: 25,060 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,000 mm, Compact forklift – Diesel Load center: 600 Fork width: 160 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 40x20x30 Rear tire type: Solid tires Rear tire size: 28x12x22 Description: In addition to this autumn model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this ATAIR IV D 150CV Super Compact. Hjdpfx Aboy Tzqqshep P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Side shifter, fork positioner Fork positioner opening range: 350/1120 mm Heater, full cab

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders Hjdpfx Abjxuv Udjhjp The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, bore 40 mm circle diameter 112-320,4 mm knife system WP material Stahl A set of window-making tools from Leitz for manufacturing IV 68/78 windows, in very good condition. The set is designed for manual feed (BG test) on table routers or similar machines. Hjdozc Rx Iepfx Abhjp Ideal for woodworking shops without window manufacturing equipment.

Condition: used, centre distance 2.000 mm turning diameter over bed 350 mm swing over plan sled 470 mm bed width 525 mm turning speeds 25 - 1.250 U/min power capacity 18 kW spindle bore 92 mm spindle head ISO 702-3 Gr. 15 diameter of quill 145 mm Inner cone of the quill MK 6 longitudinal feed 0,035 - mm/-1 face feed 0,009 - 8,0 mm/-1 metrical thread cutting 0,5 - 304 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. The guideways are in very good condition. Technical features & accessories: - various accessories Hsdpszczhmefx Abhep Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, maximum load weight: 20,530 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 03/2008, next inspection (TÜV): 03/2027, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,175 mm, total width: 2,600 mm, total height: 3,750 mm, Year of construction: 2008, Equipment: ABS, * NET PRICE Hedpfjzhyvxex Abhop * Carrier Vector 1850 Diesel + Electric (D: 6,439 hours / E: 3 hours) * BPW axles with disc brakes (90%) * Lift/steer axle * Tail lift MBB Palfinger 2.5 t * Rear view camera * L x W x H: 13.560 x 2.47 x 2.17 * Tires: 425/65 R22.5 * Unladen weight: 9,470 kg * Toolbox * German vehicle * Very good condition WhatsApp: Errors and prior sale excepted!! Sale is subject to the exclusion of all warranties!! - We speak Russian - We speak English - We speak Polish - We speak Romanian - We speak Spanish - We speak Serbian/Croatian

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK INTEGREX 200-IV ST x 1500 mm CNC Turning-Milling Center / Multitasking Turning Machine with Counter Spindle, Milling Spindle, Lower Turret, and 5-Axis Simultaneous Operation Capability. For sale is a very well-equipped Mazak Integrex 200-IV ST x 1500 mm with Mazatrol Matrix control, counter spindle, milling spindle, lower turret, 80-tool Capto C6 tool magazine, high-pressure coolant system, and finished parts unloading system with Schunk gripper. Previous Owner: High-End Medical Technology Company from Baden-Württemberg. Technical Data Manufacturer: Mazak / Yamazaki Mazak Type: Integrex 200-IV ST x 1500 mm Machine Type: CNC Turning-Milling Center / Turn-Mill Center Control: Mazatrol Matrix Serial Number: 2XXXXX Year of Manufacture according to Equipment List: 2009 Max. Turning Diameter: 660 mm Max. Turning Length: 1,495 mm Travel Ranges: X1-Axis: 580 mm X2-Axis: 150 mm Y-Axis: 160 mm Z1-Axis: 1,545 mm Z2-Axis: 1,490 mm W-Axis: 1,550 mm Main Spindle: Spindle Power: 22 kW Max. Main Spindle Speed: 5,000 rpm BB08 Ø 210 mm Internal Draw Tube: Ø 65 mm Hodpfx Abezc Hipshop Counter Spindle: Spindle Power: 18.5 kW Max. Counter Spindle Speed: 5,000 rpm Full C-Axis on the Counter Spindle Milling Spindle: Milling Spindle Power: 18.5 kW Max. Milling Spindle Speed: 12,000 rpm Tool Holder: Capto C6 Tool Magazine: 80-tool Lower Turret: 9-station Lower Turret 15-bar Pump for Lower Turret available / prepared Equipment / Options Mazatrol Matrix Control 5-Axis Simultaneous Machining on the Main Spindle Tool Center Point Control Tilted Working Plane EIA / ISO Programming EIA 3D Compensation High Smoothing Control Rotation / Coordinate Rotation Geometric Function Scaling Function External Data I/O Sub-C-Axis Control Inverse Time Auto TLM Polar Coordinates Input Comparison Stop G54.1 Synchronized Thread Cutting on the Milling Spindle Flash Tool / Flash Tool Preparation Variable 600 Sets Cylinder Function EIA Helical Tap Cycle EIA Pattern Cycle 2nd Auxiliary Functions Ethernet Operating Function including Network Card Network / Ethernet Running Coolant / Chip Conveyor / Peripherals High-Pressure Coolant System, Manufacturer: Streamware Preparation for High-Pressure 70 bar Reinforced Pump for Cover Flushing 15-bar Pump for Lower Turret Flushing System 2.7 bar on Main Spindle Flushing System 2.7 bar on Counter Spindle Chip Conveyor available, Manufacturer: Mayfran (identifiable) Oil Mist Extraction / Air Filter System, Manufacturer: LTA (identifiable) Finished Parts Unloading System with Schunk Gripper Preparation for Bar Feeder Preparation for Multi-Tool Holder Signal Light Yellow Overload Monitoring Clamping Devices / Accessories 2 pcs 3-jaw Chuck, Manufacturer: Kitagawa 1 pcs Hainbuch AxisFix mini Existing Turning Tools available upon request Capto C6 Tool Magazine with 80 Positions Electrical Data according to Nameplate / Photo Voltage: 3 AC 400 V Frequency: 50 / 60 Hz Max. Current Consumption: 128 A Rated Short-Circuit Breaking Capacity: 30 kA Manufacturer: Yamazaki Mazak Corp. VDE Inspection available, Next Inspection Date according to Inspection Label: 10/2026

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Manufacturer: JBT - Stein Model: JSO-IV-40-22TF Year: 2006 Condition: Used Serial Number: 0372PO183 Stock Number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal fluid, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Hedpfx Aey Icgiobhsp Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Automated Clean In Place (CIP) Continuous hot water, single pass, belt washer With Stein Humitroll moisture monitor and control

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 17,893 h, load capacity: 15,000 kg, lifting height: 1,980 mm, free lift: 1,980 mm, fuel type: diesel, mast type: simplex, construction height: 3,380 mm, power: 122 kW (165.87 HP), fork carriage width: 1,800 mm, fork length: 1,590 mm, empty load weight: 23,000 kg, total length: 3,860 mm, drive type: Diesel, construction width: 1,800 mm, Compact forklift - diesel Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: standard Technical condition: very good Hedpfx Ajw Hh D Djbhop Front tires type: solid rubber Front tires size: 40x16x30 Rear tires type: solid rubber Rear tires size: 28x12x22 Heater, full cabin, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." Hodjy Hi D Sjpfx Abhsp If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Siemens 6GF2005-0BC01 Videomat IV SN: SVP L2 117405, used, good condition, 100% functional Hsdpfx Asxagr Rjbhep

Condition: new, Harmonic Drive HDUC-40-96-2A-G-IV gearbox, unused, in original packaging, 100% functional. Hsdji Eac Tjpfx Abhop

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE Hjdpjuhal Ssfx Abhop - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 61 [mm] - Max. turning diameter : 400 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 795 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 410/805 [mm] - Y stroke : 140 [mm] - B Axis stroke : 225 [°] - B axis indexing precision : 0.001 [°] - Tool type : CAT 40 - Spindle speeds : 12000 [rpm] - Spindle power : 6.6 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 LOWER TURRET - Number of positions : 9 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3075 X 2330 [mm] - Machine height : 2450 [mm] - Machine weight : 7500 [kg] MACHINE HOURS - Number of hours under power : 75434 [h] - Number of working hours : 49153 [h] EQUIPMENT - CNC : Mazatrol MATRIX - Interactive programming - 3 colors status lamp - Coolant tank * Coolant through spindle - Chips conveyor - Oil mist extractor : ELBARON - Tool probe - Tool breakage detection - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD - Electric transformer

Condition: used, Year of construction: 2009, operating hours: 20,831 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: cabin, crane, Baljer&Zembrod RUW with OBX IV Crane Machine number: 1795 Track gauge: 3.0 m Crane type: OBX IV Reach: 15.2 m Lifting capacity without grab: 2,000 kg / 15.0 m Grab: included Crane position: center Hjdpfx Abey Ryglohsp Cab side: right For complete technical specifications, see the document "Technical Data" !! Sale on behalf of customer !!

Condition: used, mileage: 3,66,920 km, power: 251 kW (341.26 HP), first registration: 03/2020, fuel type: diesel, number of seats: 29, gearing type: automatic, emission class: euro6, color: beige, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Our internal vehicle number: 1187 Solaris New Urbino IV 12 Hjdoy E D Nmopfx Abhsp Power: 251 kW Emission class: Euro 6D Vehicle class: M3 First registration: 03/2020 * 1st owner in Germany, with inspection book * Voith automatic transmission 1/2/3/D/N/R * 28 + 1 seats * LAWO destination display (front/side/rear) with control unit * Electric sunblind * Air conditioning * Reversing camera * Door leaf locking system * Folding ramp * Large multi-purpose area – wheelchair / stroller * Convector heater * 2 folding windows installed on each side * Original mileage * Vehicle was branded – with adhesive film * Pre-wiring for TFT screen * NEW PAINT in RAL 9016 traffic white, applied in 05/2026 Note: Vehicle may be registered – mileage and condition may vary. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information is provided without guarantee. We reserve the right to sell the vehicle in the meantime. We refer to our general terms and conditions.

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Hsdpfx Abozdt Slshop Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Year of construction: 1995, condition: excellent (used), Höfer edge grinding machine Grinding belt dimensions: 3000 x 200 mm Oscillating grinding belt Veneer grinding attachment Mobile Hodpfx Aelnalfjbhsp CE compliant

Condition: used, empty load weight: 5,000 kg, maximum load weight: 12,000 kg, first registration: 07/2016, next inspection (TÜV): 08/2023, total length: 9,200 mm, total width: 25,500 mm, total height: 39,000 mm, suspension: air, tire size: 385 / 55 R 22.5 / 6mm, front tire size: 385 / 55 R 22.5 / 6mm, operation weight: 17,000 kg,

Condition: used, maximum load weight: 11,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2013, Equipment: ABS, tail-lift, We are very pleased that our offer has attracted your interest and can already assure you that you will be able to purchase a well-maintained, affordable vehicle with a verifiable service history from us! GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration, export documents / EUR 1 certificate, and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a leasing, hire purchase, or financing offer. SERVICE TÜV general inspection / UVV tail lift inspection / LGS inspection / tachograph calibration / installation of onboard unit (OBU) and service by our authorized workshop in advance. TOLL / ROAD CHARGES Toll registration can be completed on site. TRAVEL / DISTANCES Wittlich train station: 500 m away Frankfurt Airport: 150 km away Hedpsyw D Sxjfx Abhop Frankfurt-Hahn Airport: 40 km away Luxembourg Airport: 75 km away Sale according to our General Terms and Conditions. The information provided online is non-binding and serves as a general description. It does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Hodpfoyfl U Nex Abhop

Condition: good (used), Year of construction: 2016, Vortex Robopop Mark IV popcorn machine Hodpey R Elasfx Abhjp 2016, stainless, hot air popper for making popcorn, up to 28Kgs per hour, 3Ph