Used Maypres Mkn2-300/8 for sale (45,462)

Condition: used, Year of construction: 1978, pressure:300 t stroke:88 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 450 mm table height over floor:790 mm passage to the back:480 mm ram surface:480 x 470 mm ram adjustment:40 mm Nsdpfx Ajt Hmlkom Uowk power requirement:5,5 kW weight:8,4 t dimensions (WxDxH):2,0 x 1,6 x 3,3 m

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Njdsztplgepfx Am Uewk Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: excellent (used), Year of construction: 2015, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, injection pressure: 1,212 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Clamping force: 420 t Year of manufacture: 2015 Injection shot volume: 1,100 g Injection unit: 2300 Nsdszwdzkepfx Am Uswk Screw diameter: 70 mm Specific injection pressure: 1877 bar Injection volume: 1212 cc Injection shot volume: 1,100 g Pump motor power: 51 kW Cylinder heater power: 27 kW Screw L/D ratio: 20 Clamping force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Ejector force: 96 kN Tool height: 380 - 825 mm Opening stroke: 770 mm Maximum platen distance: 1595 mm Ejector stroke: 230 mm Oil tank capacity: 78 kW Weight: 21000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Year of manufacture: 2015 Control system: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the fixed platen) - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-drive hydraulic pump activeDrive (energy-saving) - Adjustable p+v injection in a closed-loop system - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Clamping force adjustment - activeProtect mold protection - Switchover to pressure-based clamping (WID) - PDE process data logging, 100% monitoring - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fencing included

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg With Electric Screw Drive 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Nodpfsztpkpsx Am Uswk Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m Njdpfx Aou Ictbem Uewk For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch *

Year of construction: 2012, condition: excellent (used), Automatic pallet wrappers Film pre-stretching Inventory No. 3893 Manufacturer: Lantech Type: Q 300 XT * Year of manufacture 2012 * Turntable positioning via fixed stop * Number of bottom and top wraps * Turntable diameter 1650 mm * Max. wrapping height approx. 2030 mm Nsdpszd Hwuefx Am Uswk * Own weight approx. 490 kg * In very good condition

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation Nwodpfozrvccjx Am Uok - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Njdpjxdt Umjfx Am Uswk Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2003, functionality: fully functional, The auxiliary mill from ZERMA, model GSL 180/300 Power: 4 kW Hopper opening: 290 mm x 270 mm Knives: 10 pieces on the holder, for a total of 30 Nodpfjy Ughqex Am Ujwk Screen: 6 mm

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request Nwedpfxezhpg Te Am Ujk terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1983, Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Nwodpfsr D Tnwex Am Uok Motorized rear stop with fine adjustment via handwheel up to 1000 mm cutting length limitation knife sharpened Weight: 6,800 kg

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads Nwedpfoymaw Usx Am Usk - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: used, Description: Kuka robot KR 300 R2500 ultra industrial robot, KRC 4, KCP 4 robot. Njdpfx Ajyghrgsm Uewk Complete robot, control cabinet, cable panel. 4 units in stock.

Condition: good (used), Year of construction: 2019, functionality: fully functional, EMAE-85/600 Servo feeding and straightening line with LARA D-3000/1600-MH decoiler: Nsdovmmucspfx Am Ujwk Hydraulic coil loading table for Lara D-3000/1600MH decoiler Max. width: 600mm Max-Min thickness: 0.8 – 4mm Positioning accuracy: +/-0.05mm Max. Diameter: 1600mm Max. Weight: 3000kg Connection to press CamPositioner_HBPS DieTronic coil lubricator width 500 mm Renewed safety logic and mesh fences 8/2020 CE approved

Condition: new, Year of construction: 2025, Delivery ex works TR Cutting length: 3030 mm Sheet thickness (42kgf / mm): 8 mm Sheet thickness (70kgf / mm): 4 mm Cybelec Cybtouch 8 touchscreen CNC control All-steel welded construction Automatic cutting angle adjustment Automatic cutting gap adjustment Working table with roller balls Hold-down-system Hardened and grounded upper and lower blades with 4 cutting edges Foldable front finger guard (CE compliant) Adjustable cutting stroke length 1 meter angle stop on the left with scaling 1 meter front sheet metal supports (2 pieces) CE light curtain on the rear of the machine (900 mm) Cutting line lighting Bosch Rexroth or Hoerbiger / HAWE hydraulic system Nodpfx Aegu Nu Esm Uowk Bosch Rexroth or ECKERLE hydraulic pump SIEMENS / Schneider / ABB / Omron Electronic Components Documentation in German or English CE conformity

Condition: good (used), Year of construction: 1994, power: 30 kW (40.79 HP), Drum chipper with horizontal feed max. feed width: 300 mm Nedpfx Ameu Ezp Ao Uowk max. feed height: 85 mm motor: 18.5 kW new rotor bearing

Condition: good (used), Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Made in Germany. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spiral diameters range from 3/16″ to 1 1/8″ Working width up to 500 mm Crimping thickness approx. 23 mm Cycle capacity up to 2000 cycles/hour Nedpfxezur Efj Am Uowk The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. The machine then automatically deposits the entire binding onto the outfeed conveyor. The machine includes a Renz KAS-300 hanger feeder, a CB-120HS outfeed conveyor, tools, and documentation. Power supply: 230V + compressed air. Weight: 250kg.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Njdpfx Amozkpu As Uowk Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 30,000 W, total height: 1,970 mm, total width: 1,900 mm, overall weight: 6,000 kg, product length (max.): 3,310 mm, number of axes: 5, This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details. • Working capacity: • Distance between centers: 1,020 mm • Maximum swing over covers: 580 mm • Swing diameter between centers: 470 mm • Maximum turning diameter (standard tools): 410 mm • Maximum turning diameter (driven tools): 340 mm • Main spindle: • Type: Big Bore ASA 8 • Air blow system for the self-centering chuck • Spindle opening and closing possible during rotation • Axis travel: • W: 825 mm • Rapid traverse: • X: 25 m/min Nodpfszpwu Uox Am Uswk • W: 25 m/min • Z: 30 m/min • Y: 12.5 m/min • Sub-spindle: • Connection: Flat 140 • Maximum speed: 6,000 rpm • Tool turret: • Type: OKUMA • Tool positions: 12 • Driven-tool power: 7.1 kW / 4.1 kW • Maximum driven-tool speed: 6,000 rpm Additional equipment • LNS Quick Load Servo III bar feeder • Bar interface preparation • Right-side chip conveyor • Finished-part catcher arm • MSCTN80 A8 collet chuck with various collets • Tool holder kit • Kitagawa BB210 self-centering chuck • Kitagawa B206 self-centering chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Press force: 300 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: EHT EPS D01-3D Total power requirement: 30 kW Machine weight (approx.): 24,000 kg Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Travel range X1-axis: ± 125 mm Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Nsdpjzt R A Hefx Am Uowk Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s

Condition: used, Year of construction: 2010, functionality: limited functionality, pressing force: 110 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale length: 1,200 mm, bale height: 800 mm, bale weight: 500 kg, type of input current: three-phase, input voltage: 400 V, input current: 161 A, overall weight: 36,000 kg, oil tank capacity: 1,500 l, power: 90 kW (122.37 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used EUROPRESS channel baling press, model 8300 V 5 K, manufactured in 2010. Type: Channel baling press 8300 V 5 K Factory number: 10060294 Nwedpozwpdwefx Am Ujk Drawing number: 2300000 Year of manufacture: 2010 Weight: approx. 36,000 kg Rated voltage: 3 x 400 V / 50 Hz Drive power: 90 kW Rated current: approx. 161 A If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,01,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Nwsdpfx Asyn Ntzom Uok Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: like new (used), functionality: fully functional, Hydraulic feeder type 814 300 Nwodsyi Afmjpfx Am Ujk 80 m/min. Motor power: 5.5 kW Control panel Year of manufacture: 1991

Condition: used, Year of construction: 2014, workpiece weight (max.): 25,000 kg, total length: 10,000 mm, total height: 6,000 mm, total width: 10,000 mm, overall weight: 60,000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 CNC Vertikaldrehmaschine Modernisierung: im Rahmen des Retrofits im Jahr 2014 auf Siemens SINUMERIK 840D SLArbeitsbereichTi schdurchmesser: 2.800 mm Max. Umlaufdurchmesser / Drehdurchmesser: 3.000 mm Max. Tischbelastung: 25.000 kg Max. Drehhöhe: ca. 2.100 mm Verfahrweg X-Achse: ±1.550 mm Verfahrweg Z-Achse / RAM-Hub: 1.500 mmHauptantrieb und SpindelnHauptantrieb: Siemens-Hauptmotor Antriebsleistung: 130 kW Max. Spindeldrehzahl: 4.500 min⁻¹ Betriebsart: S6, 40 %Ausstattung: 2 vertikale SpindelnWerkzeugwechsler und Peripherieo    2 automatische Werkzeugwechslero    Kühlschmierstoffanlageo    Späneförderero    Ölnebelabsaugungo    2 separate HydraulikaggregateBetriebsstunden: ca. 12.571 Stunden laut mechanischem Betriebsstundenzähler Table diameter: 2,800 mm Control: Siemens SINUMERIK 840D SL Component weight max.: 25,000 kg Swing: 3,000 mm Rotation height max.: 2,100 mm Weight approx.: 60,000 kg Nedpezmkzpjfx Am Uowk Dimensions (LxWxH) approx.: 10000 x 10000 x 6000 mm Year of construction: 2,014 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can handle even the most demanding tasks? Then the Durma press brake AD-S 803000 with a pressing force of 3000 tons might be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows for flexible and convenient positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. Furthermore, the press brake is a custom-made design and can be configured according to customer requirements to meet all individual needs. If you are interested in the Durma press brake, we would be happy to provide you with personal advice. Other machines are also available and can be inspected. Njdpfx Amoi Da Syj Ujwk Please contact us for more information and let us work together to find a customized solution for your needs. Control type: DELEM DA-66T Protection oil: suitable for sea transport Front safety system: FPSC (MANUAL) Sheet metal support systems: Movable support arm Stroke: 750 MM Back gauge type: X=1500 X, R Overhang: 1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Lower tool holder: DURMA Wide