Used Mazak Multi-Tasking Lathe Mazak - Integrex 200 for sale (26,432)

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! Bjdpsz Ar R Defx Af Ajln The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2020, condition: excellent (used), functionality: fully functional, USED YAMAZAKI MAZAK HORIZONTAL MILLING AND TURNING CENTER INTEGREX J-200 X 500 with Smooth G CNC - 36-tool magazine package (500U) - 15 kW AC turning spindle power - B-axis with mechanical locking every 1° - 15 bar coolant through the milling spindle and onto the flange - Lateral chip conveyor with belt (500U) - High/low pressure selection (requires opening/closing of the chucks with the spindle stopped) - Radio probing system - Renishaw RMP60 (complete system including probe and Mazatrol probing cycles, excluding the Renishaw "Inspection Plus" software) Bjdpoz Ihmpjfx Af Aeln - SEI FILTRATION system - Tooling and mandrel kit Complete with operating manuals, CE certification, and standard accessories.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Bedpfx Afsz Ar Uce Aeln Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Speedrange: 5000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Max. turning Ø: 850mm Blsdpfx Afsz Ata Ho Asn X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Subspindle bore: 102mm Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, machine/vehicle number: 216615, turning length: 995 mm, turning diameter over cross slide: 660 mm, turning diameter: 660 mm, spindle motor power: 22 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, milling spindle length: 30 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 35 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 1,045 mm, torque: 468 Nm, bar passage: 76 mm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, distance table center to spindle nose: 1,234 mm, overall weight: 9,760 kg, spindle diameter: 76 mm, feed force X-axis: 38 N, feed force Y-axis: 26 N, feed force Z-axis: 38 N, Equipment: documentation/manual, rotational speed infinitely variable, MAZAK INTEGREX 200-IV / 200-IVS Chuck size: 8 inches Max. swing diameter: Ø 660 mm Max. machining diameter: Ø 660 mm Max. machining length: 995 mm Max. bar capacity: up to Ø 65 mm Blodpfx Afsz A Huhs Aen Main spindle: Spindle speed: 35–5,000 rpm Main spindle motor power: 22 kW Spindle bore diameter: Ø 76 mm Milling spindle: Spindle speed: 15–12,000 rpm Milling spindle motor power: 18.5 kW Max. torque of the milling spindle: 119 Nm Max. milling tool size: Ø 125 × 300 mm Travel ranges: X-axis: 580 mm Z-axis: 1,045 mm Y-axis: 160 mm

Condition: good (used), Year of construction: 2004, TURNING AND MILLING CENTER MAZAK INTEGREX 200 IV ST THE MACHINE IS IN GOOD CONDITION, VISIBLE AT OUR WAREHOUSE IN VILLORBA 20 TOOLS AND HIGH PRESSURE SYSTEM 20 BAR Producer MAZAK Model INTEGREX 200 IV S Year 2007 Used condition Location Treviso, Italy Price Category Multitasking Machines Subcategories Stock number 633 Serial number 216700 Matrix governing unit Maximum workable length 1050 mm Maximum workable diameter 660 Bedpfx Aeiz Tmgsf Aeln Bar passage 51 Main spindle diameter 210 Main spindle power and revolutions 22 KW 5000 rpm C axis 360° Counter spindle chuck diameter 210 Counterspindle power and revolutions 18.5 KW 5000 Rpm C axis on the 555 counter spindle X-axis (travel) 580 Y axis (strokes) 160 Z axis (strokes) 1050 B axis (strokes) 225° Milling spindle power 18.5 kW Milling spindle speed 12,000 rpm CAPTO C6 spindle mount Maximum warehouse capacity 20 UT High pressure system through the spindle 20 BAR Chip conveyor Si carpet

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total width: 2,100 mm, overall weight: 9,200 kg, product length (max.): 3,850 mm, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak INTEGREX 200-3 was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum turning length of 1045 mm. The machine is equipped with a main spindle speed of 5000 rpm and a milling spindle speed of up to 12000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX 200-3 machine we have for sale. Contact us for further details. - Maximum Turning Diameter: 540-660 mm- Maximum Swing Diameter Over Bed: 660 mm- Maximum Turning Length: 1016-1045 mm- Main Spindle Speed: 35-5000 rpm- Milling Spindle Speed: up to 12000 rpm- Tool Holder: Capto C6- Machine Height: 2597 mm- Main Circuit Voltage: 3AC 400V 50/60Hz- Control Circuit Voltage: AC 100V / DC 24V- Main Motor Current: Max 84 A (400 V)- Rated Capacity: 50.0 kVA- Oil Cooling Unit Model: Daikin (Weight 190 kg)- Cooling Unit Capacity: Comp. 1.1 kW, Circulating Pump P1 0.4 kW, Circulating Pump P2 0.4 kW- Refrigerant: R407C (0.83 kg) Bodpfxszwx Ace Af Aeln

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Bedpfx Afezr U Auo Aeln Counter Spindle Yes

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, MAIN INFORMATION Bledpfszwhdvjx Af Aen Capacity and Working Area • Model: Mazak Integrex J-200 500U • Control: Mazatrol Matrix Nexus 2 • Year: 2014-05 • Serial No.: 255239 • Cutting time: 8,867 hours • Network: LAN connection • Condition: The machine is in very good technical condition with extremely high precision. • Max. turning diameter: 530 mm • Max. turning length: 500 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 450 mm • Y-axis: 200 mm • Z-axis: 550 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW (increased power) • C-axis: 360° with 0.001° indexing Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant (liquid/air) B-axis • Angular range: -30° to -190° • Full indexing Tooling, Magazine and Additional Equipment • Tool magazine: 72 positions • Tailstock: MT5 Auto • Chuck: Hainbuch Ø65 collet chuck • Tool measurement: Yes (measuring arm) • Parts catcher: Yes • Chip conveyor: Mayfran • High-pressure pump: 15 bar • Bar feeder: Irco ILS-MUK-7012 Machine Condition and History • The machine is fully operational and functions as it should. • No alarms or critical faults. • Smooth movement on all axes. • Spindles run smoothly without vibration. • Linear guides and ball screws are in good condition. • Hydraulic and pneumatic systems operate normally. • Regular in-house servicing. • Lubrication system OK. • The machine is clean and well maintained. Included Documentation • Photos of the machine • Video of the machine in operation • Screenshot of service history • Electrical diagrams on CD • Manuals on CD Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 500 mm length • 72 tool positions – rare and highly attractive • Through-spindle coolant (liquid/air) • Integrated robot interface (Smartshift BASE) • Irco bar feeder • Hainbuch collet chuck

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: Blodpezuy Tdofx Af Aon - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Maximum swing 660mm Swing over cross slide 660mm Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 157626, Manufacturer: Mazak Model: Integrex 200-2SY Controller: Mazatrol PC Fusion CNC 640 Robot NOT included Max. Machining diameter: 540 mm Max. Machining length: 1018 mm Spindlebore: 51 mm Spindlepower: 22 kW 5000 rpm Blodpfxovlxf Ds Af Aon Travel: X = 530 mm Z = 1065 mm Machine weight: 7800 kg. Machine dimensions: L=5200 x W=2500 x H=2750 mm

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 4,000 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 960 mm, number of axes: 5, This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details. • Control: Smooth G • Distance between spindles: 1000 + 440 mm • Max machining diameter: 500 mm • Spindle attachment: A2-6 • Max bar capacity: 65 mm Blsdsyxc N Ejpfx Af Aon • Spindle bore: 76 mm • Tool magazine: 36 Capto Additional equipment • Chip conveyor: Mayfran belt type

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle diameter: 200 mm, Equipment: documentation/manual, Mazak Integrex J200s Bodpfx Aezz Rt Uef Asln Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: used, Year of construction: 1998, overall weight: 8,500 kg, Technical Data | Specification Machine Type | CNC turning/milling center Control System | Mazatrol Fusion 640T Year of Manufacture | 1998 Spindles | 2 Bljdpezx Sirefx Af Aon Turret | 2 Y-axis | ± 50 mm X-axis | 240 mm Z1-axis | 440 mm Z2-axis | 495 mm C-axis | 0.001° Max. Turning Diameter | approx. 260–320 mm* Bar Capacity | 51 mm Spindle Bore | 61 mm Spindle Speed | 35–5,000 rpm Spindle Motor | 22 / 15 kW Max. Torque | 349 Nm Spindle Nose | A2-6 Chuck | approx. Ø 210 mm Tool Positions | 2 × 12 Driven Tools | 2 × 12 Drive for Driven Tools | 3.7 kW Speed of Driven Tools | 25–4,500 rpm Tool Holder | VDI 40 Rapid Traverse X | 30 m/min Rapid Traverse Y | 10 m/min Rapid Traverse Z | 33 m/min Machine Weight | approx. 8.0–8.5 t Connected Load | approx. 76–77 kVA

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle Bedjzv Sfbopfx Af Asln CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Description: The machine is in good technical condition, with the possibility of testing by prior arrangement. Maximum turning diameter: 660 mm Maximum swung diameter: 660 mm Main spindle: - Speed range: 35–5,000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub spindle: - Speed range: 35–5,000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power supply: 66 kVA Operating voltage: 400 V / 50 Hz Bedey Amqzspfx Af Aeln Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flush cooling: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant - Tool magazine for 20 tools - B axis (positioned at 0.001° increments) - C and Y axes - Sub spindle angular position indexing - Synchronization of main and sub spindle - Tool presetting system (Tool Eye) - Front door locking - 20-position tool magazine - Complete cooling system - Interface for IC memory card

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm Bljdpfx Afjzqt Umo Asn B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 2105 mm Measurements depth 3485 mm Machine weight 7500 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 3500–5000 Spindle bore 61 mm Number of axis 4 Movement X-Axis Movement 530 mm X-Axis Feed Force 0–6000 mm/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±70 mm Y-Axis Feed Force 0–6000 mm/min Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 1065 mm Z-Axis Feed Force 0–6000 mm/min Z-Axis Rapid Traverse 33 m/min Tail Stock Pinol diameter 80 mm Pinol way 870 mm Pinol tool taper MK4 Tools Number of station 20 Max weight 7 kg Bodpfox D N Ipsx Af Aeln Max tool diameter 90 mm Max tool length 250 mm This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter: 540 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 1,065 mm, controller model: Mazatrol 640, TECHNICAL DETAILS X-axis travel: 530 mm Y-axis travel: 140 mm Z-axis travel: 1,065 mm Z2-axis travel: 1,005 mm X-axis rapid traverse: 30,000 mm/min Z-axis rapid traverse: 33,000 mm/min Y-axis rapid traverse: 15,000 mm/min Z2-axis rapid traverse: 20,000 mm/min Milling spindle speed: 15–6,000 rpm Milling spindle motor power: 7.5 kW Bjdozyl Hgepfx Af Asln Max. milling spindle torque: 62.29 Nm Max. swing diameter: 540 mm Chuck size: 8" Max. machining diameter: 540 mm Max. machining length: 1,018 mm Max. bar diameter: 51 mm Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: 61 mm Spindle speed: 35–5,000 rpm Motor power (30-minute rating): 22 kW (?) Max. torque: 350 Nm Counter spindle Spindle nose: JIS A2-6" Spindle bore diameter: 44 mm Spindle speed: 35–5,000 rpm Motor power (10-minute rating): 7.5 kW Max. torque: 57 Nm Turret type: Spindle turret with ATC Tool size (external turning tool): 25 mm Tool size (internal turning tool): 40 mm Max. milling tool diameter: 120 mm (?) Max. milling tool length: 250 mm Indexing time (90°): 0.5 s MACHINE DETAILS Control: Mazatrol 640 Coolant tank volume: 250 l Power consumption (continuous): 32.7 kVA Dimensions & Weight Dimensions (L x W x H): 3,485 x 2,105 x 2,416 mm Machine weight: 7,500 kg EQUIPMENT Documentation Chip conveyor

Condition: ready for operation (used), Year of construction: 2003, MAZAK INTEGREX 200 III-ST milling turning center CN: Mazatrol 640 MT PRO Year 2003 Hours: 87,613h Max diameter: 660 Races: X 580mm X2 150mm Z 1.045mm Z2 1.010mm Y +/- 80mm W 1050mm main spindle: power: 22kw max rotation: 5000 rpm Chuck: Kitagawa BB208 (210mm) Bodpfxjk D Ez Ij Af Aoln bar passage: 65 mm secondary spindle: power: 18.5kW maximum rotation: 5000 rpm Chuck: Kitagawa BB-208 (210mm) bar passage: 65 mm Milling spindle: Power: 18.5kW Maximum rotation: 12000 rpm Tool magazine capacities: 40 x km63 (120 tools km63 with the machine) Lower tower: 9 tools Chip conveyor Mayfran consep B-axis tilt for turning tools flash tools HOB 5 simultaneous axes C axis on main spindle and secondary spindle Bar feeder interface New spindle, replaced by MAZAK on 06/2022 Machine visible in operation in France (loan to the Belgian border)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 13,006 h, functionality: fully functional, machine/vehicle number: 190433, turning length: 1,050 mm, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 1,050 mm, controller model: Mazatrol Matrix, The technical data is based on manufacturer information. The seller cannot guarantee its accuracy! Operating times according to control system: Total: 5,025 h Automatic machining: 1,866 h Pure machining RV1: 1,037 h Pure machining RV2: 298 h Operating time: 13,006 h Tool type: Capto C6 Tool changer: 72 positions Turret: 9 positions Dimensions (L x W x H): approx. 5 x 3 x 3 m TECHNICAL DETAILS Max. turning diameter: 660 mm Diameter over bed: 760 mm Turning length: 1,050 mm X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,050 mm Main spindle speed: 5,000 rpm Counter spindle speed: 5,000 rpm Milling spindle: 12,000 rpm MACHINE DETAILS Control system: Mazatrol Matrix Main circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current draw: max. 84 A Bljdpsy Slqfjfx Af Asn Main motor voltage: 400 V Rated power: 91.8 kVA Weight: 11,800 kg EQUIPMENT Bar feeder

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 172087, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Maximum turning diameter: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Maximum torque: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub-spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Maximum torque: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Milling spindle Angular positioning of the sub-spindle Bljdpfezgufrjx Af Asn Synchronization of main and sub-spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Bedpjx Atyajfx Af Aeln

Condition: excellent (used), Year of construction: 2018, mazak j-200s technical dataFor this search query, no AI-generated overview is availableCurrently, an AI-generated overview cannot be provided. Please try again later.AI overview +6 The Mazak INTEGREX j-200S is a compact 5-axis multitasking machine with sub-spindle (S) for complex turning and milling operations. Key features include an 8-inch main chuck, a maximum machining diameter of {\(\emptyset 500\text{\ mm}\)}, and a machining length of up to {\(910\text{\ mm}\)}. The B-axis offers a swivel range from {\(-30^{\circ }\)} to {\(+190^{\circ }\)}. Main technical data (Integrex j-200S): Machining capacity:Max. swing diameter: {\(530\text{\ mm}\)}Max. machining diameter: {\(\emptyset 500\text{\ mm}\)}Max. machining length: {\(910\text{\ mm}\)}Main spindle & sub-spindle:Chuck size (main & sub-spindle): 8 inchesMain spindle speed: {\(5,000\text{\ min}^{-1}\)}Main spindle power (40% duty cycle): {\(18.5\text{\ kW}\)}Milling spindle (B-axis):Speed: {\(12,000\text{\ min}^{-1}\)} (typical for the j-series, may vary with optional configurations)Swivel range: {\(-30^{\circ }\)} to {\(+190^{\circ }\)} (or a total range of 220°)Tool interface: KM63 or CAPTO C6Axes & capacity:Y-axis travel: {\(200\text{\ mm}\)} ({\(\pm 100\text{\ mm}\)})X/Z axes: {\(450\text{\ mm}\)} / {\(1119\text{\ mm}\)}Tool magazine: 20–36 tools (depending on configuration)Control: MAZATROL SmoothG or Matrix Nexus 2 The machine features a full C-axis for both spindles and an automatic tool changer, making it suitable for highly productive applications in a compact design. Bsdpfx Afeyfgdlj Asln

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 22,000 W, number of axes: 3, This 3-axis Mazak Multiplex 6200 was manufactured in 1999 and features dual spindles with a maximum speed of 5,000 rpm and a drive power of 22/15 kW each. It includes an ABB robot and turrets on both the right and left with 12 tools each. Rapid traverse rates are 30.5 m/min for the X-axis and 33 m/min for the Z-axis. If you are looking to get high-quality turning capabilities consider the Mazak Multiplex 6200 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Right and left turrets: 12 tools each Bjdpfx Afsx Nr S Do Ajln • Axes: 3; including abb robot • Main motor: 200 v