Used Mcconnel Robocut T500 for sale (200)

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. Pedsu Ruruopfx Aivjgr - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: N07/09, !!! SALE TO THE HIGHEST BIDDER !!! MBO Folding Machine T500-1-500/4F – 4 Buckle Plates – Industrial Folding Machine For sale is a folding machine manufactured by MBO Group, model T500-1-500/4F. This machine is ideally suited for print shops, lettershops, and finishing operations for the folding of brochures, leaflets, inserts, and other printed products. The robust construction of MBO folding machines ensures precise folding results, high reliability, and durable industrial quality. The buckle plate system enables a wide range of fold types to be carried out quickly and efficiently. Technical Data Manufacturer: MBO Group Model: T500-1-500/4F Machine Number: N07/09 Wiring Diagram: 35.1901.14 Folding System: Buckle Plate Folding Machine Number of Buckle Plates: 4 Max. Working Width: approx. 500 mm Application Area: Folding of printed products Possible Applications Brochures Flyers Inserts Folders Multi-page printed materials Condition Used, condition appropriate to age. Inspection Inspection of the machine possible by appointment. Further information available upon request. Pgodsyuc Ryepfx Aivor

Condition: ready for operation (used), Year of construction: 2011, Fanuc RoboCut Alpha 01E Year 2011 Podpszvlgrsfx Aivegr X-axis travel is 600 mm Y-axis travel is 400 mm Z-axis travel is 300 to 310 mm. Workpiece Capacity: Accommodates pieces up to 1050 mm long, 820 mm wide Weighing up to 1,000 kg. Control Unit: Uses the advanced Fanuc Series 31i-WA CNC system. Features: Includes automatic wire threading (AWF), reliable re-threading, integrated fluid cooling, and precision twin-servo wire tension control.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Psdpfozpvdzjx Aivjgr TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Psdpfxjzrh N Uo Aivsgr Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Cuts materials up to 6000 mm in length. Pgedpex U Df Hefx Aivsr Can automatically cut an entire profile into smaller pieces. Length, cutting angle, and material thickness are electronically adjusted on the machine. The saw system is in perfect working order. For sale due to production shutdown. We are happy to assist with loading the machine onto the buyer's truck.

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), overall weight: 1,200 kg, fuel type: diesel, Year of construction: 2013, operating hours: 1,127 h, MC Connel Robocut / Energreen Robogreen Radio-controlled mowing crawler / large-area mower / embankment mower Technical information according to manufacturer: - 40 HP 3-cylinder Isuzu diesel engine - 2-stage hydrostatic drive (0–4 and 0–7 km/h) - Emergency stop - Slope capability up to 55 degrees - Hydraulic output for mowing rotor (L/min): 50 - Working pressure (bar): 200–350 - Autec model control system - Machine weight incl. attachment (kg): 1040 Attachment: HEAD-130 - Flail mower rotor with 1.30 m working width including floating position, fitted with Y-blades - Mowing rotor weight (kg): 160 - Flail rotor speed (rpm): 3000 This Energreen Robocut was manufactured in 2013 and, according to the meter, has 1,127 operating hours. It is in very good overall condition, showing the typical signs of use and wear for this class of machine. Recently serviced with major maintenance and extensive overhaul. Sale as a used machine, excluding return, warranty, and guarantee. Pedpfx Aew A Nn Asivsgr Net price: €32,500 // Gross price: €38,675 - Viewing and test drive possible by arrangement - Nationwide shipping can be organized; costs depend on distance - Financing and leasing can be arranged individually

Condition: excellent (used), High-quality FANUC wire EDM machine in excellent condition. The machine is well-maintained, ready for operation, and suitable for precise wire EDM applications in tool, mold, and precision machine manufacturing. Manufacturer: FANUC Pgedpfx Aezrzzdsivor Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Year of Manufacture: 09/2008 Control: FANUC Series 310iS-WA Machine Type: CNC Wire EDM Machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Power supply: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic wire threading Full immersion machining Suitable wire diameter: 0.10–0.30 mm Upon request, we will gladly send you a video.

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm Pgsdpfxsyhhuwe Aivor STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: used, functionality: fully functional, machine/vehicle number: G7000034, Year of construction: 2021, operating hours: 12,000 h, The printers were purchased in July 2021, original price: €87,500. Regular maintenance was carried out by Stratasys. Reports are available. The printers are in top condition and fully functional. All print heads are present and in good condition. The printers are ready for collection. Podpszd Rtaefx Aivjgr

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 28464, overall weight: 2,300 kg, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CAT 500 cutting center – an automatic machine designed for cutting PVC profiles using a circular saw. Numerical control with dedicated software allows for programming processing parameters, limiting the operator's tasks to loading profiles and collecting finished parts. Saw parameters: - Arbor: Ø 30 mm - Diameter: Ø 500 mm - Rotational speed: 3000 rpm - Max. saw blade thickness: 4.2 mm Technical data: - Voltage: 380–400 V AC3PE - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW Pgjdpfszvmh Rsx Aiver - Air pressure: 7 bar - Weight: 2300 kg Standard equipment: - Tungsten carbide saw blade Ø 500 mm (arbor Ø30) - Welded frame with adjustable feet and the possibility of mounting to the floor - Industrial computer integrated with the machine - Infeed belts with inverter control and programmable acceleration/deceleration ramps - Label printer Dimensions: - Infeed: 7900 mm - Machine: 1000 mm - Outfeed: 2600 mm - Max. width: 2300 mm - Max. height: 1700 mm - Overall length: 11500 mm

Condition: used, functionality: fully functional, machine/vehicle number: G7000046, Year of construction: 2021, operating hours: 12,000 h, Stratasys Objet500 dental printer Pedpfozd Ruqsx Aivsgr Purchased in July 2021. Original price: €87,500 Regular maintenance performed by Stratasys. Maintenance reports available. Excellent condition, fully functional. All print heads are installed in the printer and are functional. Machine ready for pickup.

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] Podpfx Aoy Tzc Toivsgr - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: used, Year of construction: 2023, A labeling system with two rotary tables and a scissor roller conveyor is offered. 1) Fully automatic Küppersbusch wrap-around pressure-sensitive labeling machine, type: ETT 5000-V, version for cylindrical containers with 3-roller system for front and back labeling, rated output: approx. 1200containers/h, bottle travel direction: right/left, bottle diameter range: 40mm-80mm, conveyor length: approx. 2500mm, conveyor width: approx. 82mm, conveyor height: 800mm +/-100mm, Küppersbusch ETT 4301/200 label dispenser, backing paper width: 30mm-200mm, label roll core: 76mm, max. label roll outside diameter: 280mm. 2) Küppersbusch infeed rotary table: diameter: 1000mm, version with V2A stainless-steel tubular frame and plastic plate. 3) Küppersbusch accumulation rotary table, diameter: 1000mm, version with V2A stainless-steel tubular frame and wear-resistant, noise-damping plastic plate. In addition, a total of four rollers for different bottle formats are available. The support rods of the opposed rollers were shortened for processing bottles with spray heads. The system was used only in single-shift operation. The system is available from January 2027. Documentation available. An on-site inspection is possible. Pgedpfx Aijzv T Nbjvjr

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY Pgodoyxhmispfx Aivsr - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] MACHINE HOURS - Spark erosion hours : 2000 [h] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] Pgedjyxhmvspfx Aiver MACHINE HOURS - Spark erosion hours : 15000 [h] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Pgodpfeyxprtox Aivsr

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 370x270x255 [mm] - Travels on U/V axes : [mm] - Max. taper : +/-30/80 [°/mm] PART - Max. part dimensions : 700x600x250 [mm] - Max. part weight : 500 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1930x2330 [mm] - Machine height : 2270 [mm] - Machine weight : 2165 [kg] MACHINE HOURS - Number of working hours : 15874 [h] EQUIPMENT - CNC : Fanuc 31i-WA - Cooling unit Pgsdpfxoxqrqao Aivsr - Filtration unit

Condition: not inspected (used), functionality: unexamined, Folding machine T500/4 without second folding unit, without delivery unit Pedpfsrqf Sxjx Aivegr

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm Podpfxoxlf Hwo Aivogr - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

Condition: ready for operation (used), Fanuc A06B-0730-B200 30P servo motor SN WN104700 + A290-0731-T500, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please enquire for price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pgsdpfx Aerrqf Roiver

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 507688, functionality: fully functional, Hema bandsaw in very good, used condition. Garant 500 – manufactured in 1997. Pedezivaispfx Aivsgr The bandsaw was purchased from a dealer in 2019 and used only occasionally. The machine is being sold as part of the liquidation of our carpentry business. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our premises in Stemwede.

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 5,000 mm, color: black, Equipment: lighting, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2100 kg. Driven via PTO shaft at 540 rpm. Pgjdpfx Asx R Ul Neiver - Maximum horizontal reach: 5.00 m - Tractor-independent hydraulic system (46 l/min, 210 bar) incl. PTO shaft - Hydraulic collision protection - Hydraulic boom rotation - Floating position for boom - Floating position for mower rotor - Stabilization kit for three-point linkage - Electric proportional control with single joystick NEW machine, year of manufacture 2025

Condition: used, Year of construction: 2007, machine/vehicle number: MR007003, For sale: A very complete Weinig Powermat 500 (year of construction 2007). Thanks to the increased planing capacity (300x160mm) and extensive mechanization, this is the ideal production line for professional woodworkers, carpentry workshops, or timber frame construction companies. Installation can be arranged upon consultation. Key specifications: - Large capacity: Maximum processing size of no less than 300 x 160 mm (ideal for heavy timber, joists, and wide parts). - Spindle arrangement (5 axes): Bottom (11 kW) – Right (7.5 kW) – Left (7.5 kW) – Top (11 kW) – Bottom (7.5 kW). - Including oscillating axis: Equipped with a moving spindle with an input measuring system. Enables efficient processing of boards with varying/tapering widths with minimal wood loss. - Combined spindle mounting: Equipped with a PowerLock quick-change system on both bottom spindles and the top spindle. Conventional mounting ø 40 mm side spindles. - PowerCom Control: Graphic touchscreen for quick profile changes and digital management of tool settings. - 1-Man Operation: Including automatic return system. - Including accessories: Supplied with straight planing heads (bottom jointing cutters) and an extra horizontal PowerLock axis. Machine manuals are available. Pgjdozwv Euopfx Aiver Technical specifications: - Number of planing axes: 5 - Order of planing axes: B-R-L-B-B - Maximum planing width: 300 mm - Maximum planing height: 160 mm - Feed rate: 5-30 /min - Serial number: 109200

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: DN1771/1789/1791, 1x Abus VS column-mounted slewing crane, capacity 500 KG There are 3 identical cranes available. Load capacity at full outreach: 500 KG / 0.5 tons Height: approx. 3.6m Upper carriage outreach: approx. 3.42m Outreach: approx. 2.5m Hook height: approx. 3m Total weight: approx. 350 Kg Includes Abus chain hoist with floor control (2 lifting speeds) with slewing and trolley drive Connection to 400V 16A, slewing range 360° Crane is disassembled and immediately available. The gripper is not included! Item location is 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Pgjdpozv Hy Tsfx Aivsr Very good condition, see pictures. Shipping via freight forwarder or collection by arrangement.