Used Meyco Plataeuwagen Tunnel Boring Machine for sale (66,020)

Condition: excellent (used), functionality: fully functional, power: 144 kW (195.79 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 19,300 kg, maximum load weight: 6,800 kg, tire size: 17,5 R 25, Year of construction: 2023, operating hours: 4,092 h, Automation: Telematic system for Wi-Fi/LTE Remote control: Prepared Bucket width: 2,230 mm Fire suppression system: Ansul Checkfire 210D Cab: ISO ROPS/FOPS Engine power: 144 kW / 193 hp Engine: Cummins QSB6.7 EPA Tier 3 / EU Stage IIIA Length of standard machine: 8,705 mm Height with bucket lowered: 1,903 mm Height with bucket raised: 4,298 mm Tipping force, hydraulic: 13,350 kg Ibjdszcchujpfx Achja Tire size: 17.5 R 25 Tipping force, mechanical: 11,700 kg Payload capacity, standard bucket: 6,800 kg Axle load, front/rear: 8,600 / 10,700 kg Weight of empty machine: 19,300 kg

Condition: new, functionality: fully functional, overall weight: 105 kg, Year of construction: 2025, What is controlled jacking? Controlled jacking is a trenchless technology that allows underground installations—such as water pipes, sewage pipes, power cables, electrical cables, telecommunications cables, fiber optic cables, water pipes, and sewage pipes—to be laid without the need for extensive excavation. The jacking machine is hydraulically driven and equipped with a pilot head that can be used to correct the path of the jacking. Thanks to measuring systems, the operator controls the depth and direction of the jacking, which allows for high precision, even with passages several dozen meters long, in situations where accuracy and precise avoidance of obstacles in the terrain are important in order not to damage the existing infrastructure and to safely bypass it. This solution is particularly valued in places where earthworks are difficult or impossible, e.g., under roads, lawns, tram tracks, parking lots, sidewalks, or urban areas. Why use controlled pipe jacking? Controlled pipe jacking is an alternative to traditional excavation, eliminating the need to dig up the surface. This method significantly reduces the time needed to complete the project, lowers the cost of restoring the site to its original condition, and minimizes the impact on traffic and the environment. The most important advantages of controlled pipe jacking technology: - no need to interfere with above-ground infrastructure, - the ability to work under obstacles (e.g., roads, sidewalks, lawns, property entrances, railroad tracks), - reduction of noise, - vibrations, and environmental pollution, - high route accuracy, - quick mobilization of equipment and short completion time, - lower risk of collision with existing installations. - no need to use bentonite slurry, - no spoil during jacking Thanks to these features, controlled jacking is commonly used in the construction of municipal networks, water and sewage connections, gas, fiber optic and cable connections. Application of controlled jacking Controlled jacking is ideal wherever installation is required without disrupting the surrounding area. The most common applications for jacking machines are: - crossings under roads and streets with heavy traffic, - jacking under railway and tram tracks, - crossings under watercourses and canals, -installations under sidewalks, parking lots, squares, and industrial areas, - connections to properties without digging up the entire area. With the ALUSTEER product, no drilling mud (bentonite) is used, which significantly reduces implementation costs and environmental impact. This technology can be used both in cities and in non-urban areas – wherever precision, speed, and reduced impact are important. Isdpfx Acsxxhzwsheba Accuracy and direction control Modern jacking machines use sensors that enable continuous monitoring of the head position. The operator tracks the parameters on the receiver and operator tablet and reacts in case of deviations from the planned route. Such solutions ensure: - high precision of the breakthrough, - safety for the existing infrastructure, - repeatability and predictability of results. In practice, deviations from the jacking axis are usually no more than a few centimeters, which is fully acceptable in most projects.

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Drilling unit 3 Position: Top Vertical drilling spindles: 12 Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Ibsdpjzmtpvsfx Achsa Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Roller conveyor Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: good (used), functionality: fully functional, machine/vehicle number: 901, travel distance X-axis: 370 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 405 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 75 rpm, table length: 500 mm, table width: 380 mm, spindle mount: MK 2, total height: 2,000 mm, total length: 1,590 mm, total width: 1,290 mm, quill stroke: 155 mm, Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill. Isdpfx Acozrmf Iohsba -Jig boring machine: including tool cabinet with various tools -Table dimensions 380 x 500 mm -Travel: Z 405 mm/Y 470 mm/X 370 mm -Quill stroke: 155 mm -Take: MK2 (plus outer cone for spindle tool) -Speeds: 75 - 2000 rpm -Machine dimensions: 1590/1290/H2000 mm -Machine weight: 1774 kg -Cabinet dimensions: 720/460/H1000 mm -Cabinet weight: 158 kg Price negotiable Rotary table shown in one of the pictures not included Worldwide shipping can be arranged at additional charges

Condition: used, Year of construction: 2014, Drilling and dowel insertion machine Manufacturer: Weeke Type: OPTIMAT ABD150 Year of manufacture: 2014 Technical data Note: Ibjdezuyn Ijpfx Achja The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 500 mm, Floor boring machine WMW Union BFP 130/5 X-axis: 8300mm Y-axis: 2500mm Z-axis: 500mm W-axis: 900mm Spindle diameter: 130mm Spindle taper: ISO 50 Rotary table: 2000x1800 2 x floor plates: 3500x1750 Year of manufacture: 1978 Milling head Tailstock DRO Heidenhain Spindle stabilizer Boring bar Many accessories ✅ Excellent working condition Total weight: 53 tones Isdpszt Iqbofx Achjba

Condition: used, Radial drilling machine REFORM, type RB 50-16 Year of manufacture: 2002 Drilling capacity in steel: max. 50 mm Tool holder: MK 5 Nominal overhang: 1600 mm Maximum overhang of the spindle to the column: 1600 mm Maximum overhang of the spindle to the column base: 1500 mm Minimum overhang of the spindle to the column: 340 mm Iedpfxjzupamo Achoba Minimum overhang of the spindle to the column base: 240 mm Travel of the drilling head: 1260 mm Height adjustment of the arm: 600 mm Distance between clamping surface and drilling quill: max. 1100 mm Spindle speed: 25-2000 rpm Quill stroke: 300 mm Quill diameter: 80 mm Feed rate: 0.04 to 3.2 mm/rev (16 steps) Clamping surface of the base plate: 1750 x 980 mm (1650 x 840 mm) Column diameter: 350 mm Motor power, spindle drive: 4 kW Mains connection: 400 volts, 50 Hz - Spindle speed controlled via 16 gear stages with speed preselection and hydraulic gear shifting - Right and left rotation of the drilling spindle - Automatic feed via 16 gear stages with feed rate preselection and hydraulic gear shifting - Electro-mechanical height adjustment of the arm, with hydro-mechanical arm clamping - Hydro-mechanical central clamping of the head and column via push buttons - Coolant system in the machine base Machine height with drilling head at the top: max. 2840 mm Space requirement L x W x H: 2400 x 1000 x 2650 mm Weight: 3.5 tons Good condition

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Ijdpfsxcbhrex Achsba Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € 15 mm MK 2 220 mm 40 - 4000 U/min 0,75 kW M12 400 mm 520 mm 850 mm 65 kg 70 mm 85 - 370 mm Ibedjy Hf Nwepfx Achoa 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 Nm Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package (vice & keyless chuck)

Condition: used, Year of construction: 2018, machine/vehicle number: 432.10.507.19, type of input current: three-phase, overall weight: 340 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 3 A, power: 1.5 kW (2.04 HP), We offer this used Felder FD 21 pro dowel drilling machine, manufactured in 2018. Type: FD 21 pro Serial number: 432.10.507.19 Code: 7502 Voltage: 400.0 V Number of phases: 3 Frequency: 50 Hz Current: 3.35 A Power: 1.5 kW Year of manufacture: 2018 Country of manufacture: Austria Iodpfxozuwguj Achoba If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. Iedpfx Ajvvx Hiocheba 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Iedpfx Acexgu R Iehsba Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces Ibodpfjuddimex Achsa A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Ibodexgic Eepfx Achja Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar Ibjdpfxewdta Eo Achsa - documentation

Condition: excellent (used), functionality: fully functional, TRIADE FR3 S Drilling Machines for Turned Parts Number of drilling units: 3 1. Lower unit: 3 kW 2. Upper unit: 1.5 kW 3. Lower unit: 1.1 kW (can also be used for screwing in sleeves/screws) Pneumatic material clamping system Iodpeznmlyjfx Acheba Application: Drilling of legs, turned parts, curtain rail components Weight: 1200 kg Dimensions: 115 x 128 x 180 cm (H)

Condition: used, Year of construction: 1994, spindle diameter 125 mm x-travel 2000 mm y-travel 1600 mm Control Siemens 840 C z-travel 1400 mm 600 mm ja total power requirement 40 kW Ibjdpoztfwxefx Achsa weight of the machine ca. 27 t

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Iodpfxozmxf Aj Achjba Defective – PLC controller missing.

Condition: new, Year of construction: 2026, functionality: fully functional, table load: 10,000 kg, spindle diameter: 130 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 800 rpm, total height: 3,800 mm, total length: 7,030 mm, total width: 4,665 mm, table length: 1,800 mm, table width: 1,600 mm, spindle motor power: 15,000 W, MTP TPX6113-2 HORIZONTAL BORING MACHINE Horizontal Boring Machine TPX6113/2 – Precision and Power for Heavy Machining The TPX6113/2 horizontal boring machine is a robust and efficient solution designed for precise machining of large and heavy workpieces. Thanks to its rigid construction and high technical performance, it is ideally suited for use in the mechanical, energy, and steel structure industries. The machine is equipped with a Ø130 mm spindle, ensuring high stability and enabling demanding machining operations. A powerful 15 kW main motor and high torque guarantee efficient performance even under heavy loads. The large worktable (1800 × 1600 mm) with a maximum load capacity of 10,000 kg allows machining of heavy components without compromise. The full table rotation (B axis – 360°) increases flexibility and enables multi-side machining without repositioning the workpiece. Technical Specifications: Spindle diameter: Ø130 mm Max spindle torque: 3136 Nm Max spindle feed force: 31,360 N Number of spindle speeds: 24 Spindle speed range: 4–800 rpm Main motor power: 15 kW Max facing head torque: 4900 Nm Facing head diameter: 750 mm Facing head speed range: 2.5–125 rpm Number of facing head speeds: 18 Table size: 1800 × 1600 mm Max table load: 10,000 kg Iedpfsy Eyg Uex Achjba T-slots: 28 mm × 10 Axis travels (X/Y/Z/W/U): 2000 / 1800 / 2000 / 900 / 250 mm Table rotation (B axis): 360° Rapid feed (X/Y/Z/W): 2500 mm/min Feed per spindle revolution (X/Y/Z/U): 0.05–8 / 0.01–2 mm/rev Measurement system accuracy (X/Y/Z): 0.005 mm (Z optional) Measurement system accuracy (B axis): 0.001 mm (optional) Dimensions: 7030 × 4665 × 3800 mm Machine weight: 29,300 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The PR622F4 is a specialized CNC horizontal boring machine developed and manufactured by the St. Petersburg-based TBS Machine Tool Plant. This heavy-duty machine is designed specifically for the needs of railway transport and transport engineering. It is intended for high-precision machining of key and critical rolling stock components. Thanks to specialized equipment, one such complex replaces a production line of 12 obsolete machines. WorkpiecesThe machine is used to process technological and operational surfaces of the following units:Axlebox housings and bolstersHousings, locks and lock holders of automatic couplingsNon-rotating shoes and safety devicesTraction clamps and centering beamsSide frames of freight trolleysDesign featuresHigh precision: the movements of moving units are controlled by precision feedback sensors along the X, Y, Z and W axes.Rigidity and stability: reliable hydraulic clamps ensure that the units are fixed in specified positions.Combined guides: sliding pairs (cast iron-TsAM/fluoron) are used along the X and Y axes together with hardened steel lateral rolling bearings.Precision ball screws: high-quality ball screws are used for smooth and precise linear movement of the units transmission. Rotary table (B axis): equipped with an automated precision stop system at positions 0, 90, 180 and 270 degrees. Protection of units: telescopic covers completely cover the bed guides from chips and dirt. Technological equipment For the implementation of complex technological operations, the PR622F4 machine is supplied with a specialized kit: Hanging faceplate, Hollow spindle extension, Special clamping devices for fixing automatic coupling housings and side frames of bogies, Sets of cutting tools and mandrels for specific parts Iedpfozr H T Ejx Achsba

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 Ijdpfxeif Az Uj Acheba 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: new, functionality: fully functional, drilling depth: 55 mm, rotational speed (min.): 2,800 rpm, power: 3 kW (4.08 HP), table height: 875 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, High productivity for drilling furniture sides The MAGGI Boring System 46 is a semi-automatic multi-spindle drilling machine, equipped with two parallel vertical heads, each with 23 drilling spindles. It is the ideal solution for furniture manufacturers who frequently drill holes in the sides of cabinets, bookshelves, wardrobes, or shelving units. Thanks to the two drilling heads, the machine drills two parallel rows of holes in a single work cycle, significantly reducing production time compared to a machine with a single head. Manufacturer MAGGI – Italy Ibedpszp H Nzofx Achea Number of spindles 46 pieces Spindles left - right 11 left, 12 right Distance between spindles 32 mm Distance between outer spindles 145 – 625 mm Distance front unit-fence 15 – 494 mm Distance rear unit-fence 160 – 639 mm Maximum vertical drilling depth 55 mm Maximum drilling tool diameter (Ø) 40 mm Drill shank diameter (Ø) 10 mm Hydraulic piston stroke 70 mm Maximum panel thickness 50 mm Maximum workpiece size 3000 x 700 mm Table height from the ground 875 mm Workpiece clamping pistons 6 pieces Number of motors 2 pieces Motor power 2 HP/ 1.5 kW Motor speed 2800 rpm Required air pressure 6-8 bar Air consumption 20 l/cycle Exhaust hood diameter (Ø) 80 mm Overall dimensions 1206 x 1180 x 1163 mm Net weight 366 kg Supply voltage 400 V – 3 Phase – 50 HZ

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, travel distance X-axis: 15,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,915 mm, spindle speed (max.): 700 rpm, total width: 6,400 mm, total length: 19,300 mm, total height: 10,370 mm, feed length W-axis: 3,000 mm, spindle diameter: 250 mm, table height: 400 mm, table length: 8,000 mm, table width: 5,665 mm, overall weight: 1,37,000 kg, year of last overhaul: 2006, grinding spindle motor power: 83,000 W, type of input current: three-phase, We offer for sale a Škoda W250H floor boring machine. This machine is designed for machining heavy and large-sized components for the energy, shipbuilding, metallurgical, mining, and machine production industries. The machine is equipped with a Siemens Sinumerik 840D control system, enabling the execution of demanding boring, drilling, and milling operations. Ibodpfezrwq Ijx Achsa Complete technical documentation is available. Upon request, we can provide additional photos, videos, and information regarding the machine's equipment and technical condition. Standard equipment: Tool and measuring instrument storage rack, mounted on the spindle box. Optional equipment: Cooling system with coolant Rotary table 4000x3550 3 x angular heads

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Ijdpfx Acezp Dn Iohsba Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Ibedpfx Acottv Uaohea