Used Mfp Fördertechnik 2500 X 250 for sale (65,968)

Condition: used, Conveyor belt, belt conveyor, belt feeder, band conveyor MFP Fördertechnik Year of manufacture: approx. 2015 Usable length: 2500 mm Belt width: 250 mm Belt length: approx. 5200 mm Frame profile height: 50 mm Return roller diameter: 20 mm Belt speed: approx. 5 m/min to 40 m/min Conveyor belt height: approx. 1000 mm Motor power: 140 watts Power supply: 230 volts, 50 Hz Hedpfxoxf Uqlj Alwsu - Stepless belt speed adjustment via potentiometer on ROFRE frequency converter, type 897 - Reversible operation (forward/reverse) - Belt drive by INTERROLL drum motor - Sturdy steel sheet construction with closed steel plate underneath the conveyor belt - 1 piece height-adjustable HAACON base with hand crank, conveyor height approx. 1000 to 1200 mm - HAACON base mounted on steel plate: length 500 mm x width 450 mm x thickness 20 mm - 1 piece fixed support foot without height adjustment as a transport support - Fully mobile on swivel castors Overall dimensions (L x W x H): 2570 x 400 x 1050 mm Weight: 115 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Hedpjx Svm Rsfx Alwju Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: excellent (used), Year of construction: 2022, Weinig Dimter ProfiPress L II Comfort 2500 x 1300 Wooden input length min./max. 800 - 2500 mm Timber widths min./max. 40 - 150 mm Unequal fin width in a panel Wood thicknesses min./max. 4 - 30 mm Plate end widths variable min. / max. 200 - 1300 mm Glue / adhesive type PVAc (Polyvinyl Acetate) Total pressing force max. 240 kN Press force per cylinder max. 24 kN - min. 4.4 kN Filling width of the press per cycle min. 1150 mm - max. 1350 mm Filling area of the press per cycle max. 3.25 m² Min. area occupancy per filling 50 % Max. recommended values are: Specific pressing pressure for softwood approx. 1.0 N/mm² specific pressing pressure for hardwood approx. 1.4 N/mm² Glue station GS 100 - 2,5 m Heizung Hochfrequenz mit Generator, luftgekühlt Generator 30 kW, luftgekühlt Outfeed conveyor 2500mm Full description on request. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Hedpfxez Dh S Rj Alwou Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 4789, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2016 - Serial number: 4789 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Hodpfx Aloz Aalvjwou Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 10 m2 workspace, 4 m2 dressing area 16 x Filter Fan Units Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Brecon BCPS cassette system: Panel thickness: 70 mm Maximum wall height: 6 meters Standard panel width: 1,200 mm Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Hedpfjzgcy Dex Alwou Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Hsdpszwvv Tofx Alweu Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Hjdpfx Aloz Aarcjwju Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. Hedpfxoyx U N De Alwsu - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Please contact us for further information. Price on request!

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Hedezw Ucxopfx Alwsu Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Hodpfxozw Ug Rs Alweu Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5290, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2020 - Serial number: 5290 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Hsdpfjz Aawxjx Alwou Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: excellent (used), Year of construction: 2008, Technical specifications: Working length: 2550 mm Frame width: 2050 mm Pressing force: 80 tons CNC control: OPERATOR II Graphic 14” TFT color monitor Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Hodpey D T Rwjfx Alweu Stroke: 350 mm Overhang: 420 mm Working height: 960 mm Motor power: 9 kW CE marking Dimensions (length x width x height): approx. 3400 x 2050 x 2550 mm Weight: approx. 6 tons Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Very good condition, little used, only approx. 5,350 operating hours The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Hedpez Aaw Sefx Alweu - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, functionality: fully functional, Equipment: type plate available, SHEARING MACHINE – MARIO RIBOLDI 2500 X 3/4 MODEL: CEM 253 Hodpjzbck Tofx Alweu USED MACHINE INTERNAL CODE: SVR 425

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Counter Spindle Yes Hedpjzy N Nlofx Alwsu Driven Tools Yes

Condition: used, functionality: fully functional, Year of construction: 2017, control type: NC control, Motorized Guillotine Shear Manufacturer: Knuth Model: KMT 2500 x 4.0 mm Year of manufacture: 2017 Technical Data Brand: Knuth Model: KMT Year: 2017 Working length: 2550 mm Sheet thickness: 4.0 mm (450N/mm²) Cutting angle: 1.5° Strokes/min: 42 Motor power: 7.5 kW Weight: 3.2 t Dimensions: L 3.10 x W 1.70 x H 1.30 m Equipment • Support arms • Motorized backgauge 600 mm • Pneumatic sheet supports • NC control Hedpfx Alow Naghoweu • Cutting line illumination • Foot switch All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2022, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Hjdpfx Ajd Nxn Nolwsu -images similar-

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, total height: 2,187 mm, overall weight: 6,360 kg, number of axes: 5, This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Machine Benefits Technical machine benefits: • Jog Feedrate X, Z, B, Y Axis: 0–5000 mm/min • Max Cutting Diameter: 460 mm • Max Cutting Length: 795 mm Hodpfox D Sc Nsx Alwju • Bar Work Capacity: 80 mm • Spindle Automatic Tool Setter: Included • Sub-Spindle Tool Setter: Included • Spindle Speed Ranges: 2 • Spindle Nose: JIS A2-8 • Through-Spindle Hole Diameter: 91 mm • Total Power: 40 kVA Extra information Sub-Spindle:C Axis in Sub-Spindle: IncludedC Axis Index in Sub-Spindle: 0.001°Sub-Spindle Speed: 6000 rpmSub-Spindle Speed Ranges: 1Sub-Spindle Nose: JIS A2-5Sub-Spindle Through Hole Diameter: 43 mmSub-Spindle Drive Motor: 11 / 7.5 kWSub-Spindle Chuck Ø: 170 mmHead Chuck Ø: 250 mmMedia:High Pressure Coolant: IncludedChip Conveyor: IncludedFume Extractor: IncludedAutomatic Barfeed: Hydrafeed Multiservo Mod MSV, IncludedPart Catcher: IncludedTurret:Rotary Tool Positions in Turret: 12Rotary Tool Spindle Rate: 6000 rpmTool Size: 25 × 25 mm1 Radial Driven Tool Holder: Included1 Axial Driven Tool Holder: Included Dimensions Machine Depth 3994 mm

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Hsdpfx Alozt Sxvjweu Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, Year of construction: 2012, turning diameter max. 356 mm turning length 1.255 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm distance between spindles 1.511 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW Hjdez Dbqtopfx Alweu spindle nose JIS A2-8 spindle bore 91 mm max. bar capacity 80 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm x-travel 260 mm z-travel 1.345 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 50 kVA weight of the machine ca. 7,8 t dimensions of the machine ca. 6,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 1250 - Subspindle

Condition: used, Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Hjdpfx Alszwgpqowou Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Hodpfjztckisx Alwsu Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2019, condition: excellent (used), Wemo WCS-R 400x2500 (2019) Hsdpfx Asx U Dh Uslwou Conveyor belt Dimensions: 400x 2500 mm Year : 2019

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Hsdew Dfhuepfx Alwou

Condition: good (used), Year of construction: 2007, Doosan MX 2500 LST Year: 2007 Fanuc 18iT-B Includes tooling Capacity Turning length mm: 1,520 Swing diameter mm: ø 540 Swing over bed mm: ø 750 Swing over cross-slide mm: 600 Bar work capacity mm: 76 Turn-mill spindle X-axis travel mm: 555 Y-axis travel mm: 160 (+-80) Hjdpfx Aszzxv Relweu Z-axis travel mm: 1,595 B-axis degree: 240º (+-120º) Tool system: Capto C6 Tool storage capacity: 40 Spindle speed rpm: 10,000 Lower turret X-axis travel mm: 185 Z-axis travel mm: 1,640 Number of tool slots: 12 Speed of driven tools RPM: 4,000 Main spindle Spindle speed rpm: 3,500 Counter spindle Spindle speed rpm: 3,500 Counter spindle travel mm: 1,565 Coolant system Tank capacity liters: 500 High-pressure bar: 70