Used Mikron 5 Axis Cnc Machine for sale (98,546)

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, rotational speed (max.): 20,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Bedpjzbqy Nsfx Amnjli Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2016, Ref. -No.: 10653 Manufacturer: HERMLE Type: C 250 U Year of construction: 2016 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany X-Travel: 600 mm Y-Travel: 550 mm Z-Travel: 450 mm C-Axis: 360 ° Table Load: 300 kg Numbers Of Tools In Magazin: 30 Tool changer: Automatisches Kettenmagazin Spindle Speed: 18000 RPM A-Axis: +/- 115 ° Further information: - Electronic handwheel (HR Handwheel) included - Central lubrication system included - Chip removal system included - Capable of simultaneous 5-axis machining Bledpfx Amszh Hmdsnsi - High-precision gantry design - Advanced 3D and 5-axis programming support - Compact and rigid machine frame - Tool stations expandable to up to 118 tools. - The table can rotate and swivel while the actual milling tools move along the other axes. - The machine can machine workpieces from five sides in a single operation. The machine can machine workpieces from five sides in a single operation. The machine can be viewed while powered on by appointment.

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY €99,000!!! This price is valid until 30/08/2026! Don't miss this opportunity! We invite you to purchase a NEW and outstanding 5-AXIS MACHINING CENTER from the renowned company FANUM. We offer the new SIGMA model, which is exceptionally well-equipped. The machine is brand new, and the attached specification details its functions, parameters, and production capabilities. FANUM has been known for many years for its reliability, precision, high power, and fast working speed. The MACHINING CENTER we offer is BRAND NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered to our premises by the manufacturer. The FANUM Sp. z o.o. service team only commissioned the machine, and it has not been used since. Its condition can be considered completely NEW. Our model is exceptionally well-equipped and has practically everything you might need. Currently, a new device costs around EUR 282,350 net, which is PLN 1,200,000 net. Blodpfx Amjyn Rpwonoi We have direct contact with and support from the manufacturer, FANUM Sp. z o.o. Another start-up inspection and demonstration can be arranged at our location. Of course, it is also possible to transport the device to the new owner and have the FANUM machine installed and started up at their site. The price we propose includes the device itself, although we can also offer a quote with installation and commissioning at the new location. In our opinion, the discount we offer, over 64% (more than €180,000 net, about PLN 800,000 net) off the value of a new machine, makes this an extremely attractive price for anyone currently looking for a similar device for their machine park, or who did not expect, within their established budget for a MACHINING CENTER, to be able to purchase a modern, new, and exceptionally efficient machine. General remarks regarding the sales offer: • Although the machine is NEW, it was manufactured in 2021, and we do not offer any guarantee or warranty. • The device cannot be returned. • The price in the advertisement does not include VAT (23% for buyers in Poland), which will be added to the invoice—please check how the price is stated in the ad. • Single owner. * Price in EUR calculated based on the NBP exchange rate – 1 EUR = 4.25 PLN. Welcome to all users of the MACHINESEEKER platform. We are new users of MACHINESEEKER. We are not a furniture, manufacturing, or machine trading company. We own numerous properties in Poland and are a developer building houses and apartments in Warsaw (the capital of Poland). The machines listed in the offer are our property. We acquired them in settlements with our tenants from the furniture industry. We know their history and condition, which is consistent with our descriptions. We are in contact with the machine manufacturers, who can provide additional support – Homag, Otto Martin, OMC Machinery, and FANUM. Since we do not need these machines, our prices are very attractive, especially since the machines are practically new. We can assist with transportation anywhere in Poland or the EU. You are welcome to inspect the machines before purchase. Best regards.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Blodpfxoy Ih Rge Amnsi Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: used, Year of construction: 2014, Used machine Bodpfxox Hllxj Amneli Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: good (used), Year of construction: 2014, Mazatrol Matrix 2 Control, Table Size 500 X 400mm, Table Load 300 Kgs, Traverses X Y Z; 350 X 550 X 510mm, Bledezibazspfx Amnji Min-Max Distance Spindle to Table 50 -560mm, C Axis 0.0001 Degrees, A Axis -120 ~ +30 Degrees, Spindle Power 22kW, Spindle Speed 12,000 Rpm, 30 Station ATC, Spindle Taper DIN 40, Coolant, Through Spindle Coolant,

Condition: used, Year of construction: 2007, operating hours: 33,122 h, Hermle simultaneous 5-axis CNC machining center Type/Model: U 1130 Condition: Used Year of manufacture: 2007 Operating hours: 33,122 h Spindle hours: 12,054 h Technical data: Travel range X/Y/Z: 1130 (1300) mm x 720 mm x 630 mm Feed rate: Manual / setup mode: 1 - 2000 mm/min Bjdpfx Ajzfg U Njmnjli Programmable X-Y axis: 1 - 30000 mm/min Programmable Z axis: 1 - 20000 mm/min Rotary table: Tool interface: SK 40 Total connected load: 32 kW Space requirement (L/W/H) approx.: 3.66 m x 4.38 m x 2.57 m Weight approx.: approx. 10 tons Equipment: - Heidenhain iTNC 530 control system - Heidenhain TS 640 infrared measuring probe - 16-position tool changer - incl. SK 40 tool interface plus various tools - Machine vise - IKZ (internal coolant supply) - Paper band filter - Oil cooler - Chip conveyor - Control cabinet air conditioning - RS 232 interface - LAN interface Costs for delivery by freight forwarder to the curb, see shopping cart or individual offer for inquiry items.

Condition: good (used), Year of construction: 2012, 5-Axis CNC Machining Center Manufacturer: AXA Machine Model: VPC-2800U Control System: Siemens Year of Manufacture: 2012 Technical Specifications Working Area - X travel vertical (mm): 3,900 - Y travel (mm): 2,940 - Z travel (mm): 1,100 CNC Rotary Table - Clamping area (mm): ø 2,800 Feed Drive - Max. rapid traverse speed in X/Y/Z (m/min): 30/30/25 Working Spindle - Standard drive No.: 140 Spindle speed range (rpm): 30-7,500 Spindle power max. duty cycle 100% (kW): 63 Spindle torque max. duty cycle 100% (Nm): 191 Tool holder: SK50 Swivel Head - Swivel range B-axis (degrees): 90 - Indexing: freely interpolating Bsdjzfhdxspfx Amnoli Tool Changer - Tool stations: 60 Please note: The machine is NOT equipped with a turning function. Changes and errors in the technical data and information excepted.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Bledjyuw Srepfx Amnsi Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 Bedpfszf Hyrex Amnoli If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, 5-Axis Machining Center This machine was used as a showroom machine from 2016 to 2022. From 2022, the machine was used for production at HAL Plauen for the processing of axle carriers. Before being used for production, the machine was completely overhauled/refurbished. In December 2024, a new milling spindle was purchased (the spindle has approximately 500 operating hours). Machine operating hours: 24,000 Working area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed rate / Rapid traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table load capacity: -> Max. weight 400 kg Blsdszc Ekrspfx Amnoi Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s with chip conveyor and chiller/cooling unit • Manufacturer: Lahntechnik GmbH • Model: KESY 280-01 • Serial number: 2017-05981 • Year of manufacture: 2017 • Power rating: 13.6 kW • Nominal voltage: 400 V / 3~ / PE / 50 Hz • Control voltage: 24 V DC • Protection class: IP 54 • Refrigerant: R410A – 10.03 t CO₂ equivalent • Max. operating pressure: 30 bar (HD) / 19 bar (ND) • Empty weight: 400 kg • Country of origin: Germany The machine/asset does not include any product-related tools/fixtures or grippers (robots). The machine was taken out of production in October 2025 due to the factory closure. It is still powered on and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please review the videos available, which were taken of the machine in December 2025. Transport locks are not required. For loading and unloading, special Wenzler lifting/transport equipment is required. This equipment must be rented directly from Wenzler/Heller Group by the buyer. After lifting and unloading, the buyer must return the equipment to Wenzler.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Bljdpfx Amozc D Hfjnsi Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10628 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Rotary Table (Lxw): 2500 x 2000 mm Bledpfx Aozc D D Rjmnji No. Of Working Stations: 60 Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with -H / V- head Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor Blodjzc D Agspfx Amnsi - Complete housing The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Bljdpfx Aszc D Aasmnei Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° Bledpozc Dzijfx Amnei NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: used, 5-Axis CNC Machining Centre – EMMEGI SATELLITE TU/6.5 Bledpfx Aezhbg Somnoi Manufacturer: Emmegi Model: Satellite TU/6.5 5-axis CNC machining centre designed for machining aluminium profiles and light alloys. Ideal for milling, drilling, tapping and complex multi-face machining operations in a single setup, ensuring high precision and productivity. The machine is equipped with a high-speed vertical electrospindle, automatic tool magazine, pneumatic profile clamps, and an Emmegi CNC control system, making it an ideal solution for the production of aluminium windows, doors, curtain walls and architectural aluminium structures. Main Features ✅ 5-axis CNC machining centre ✅ Suitable for aluminium profiles and light alloys ✅ Milling, drilling, tapping and multiple machining operations ✅ High-speed electrospindle ✅ Automatic tool magazine ✅ Pneumatic clamps for secure profile clamping ✅ Long worktable for machining long profiles ✅ CE marked Technical Specifications X-axis travel: 6,500 mm Y-axis travel: 800 mm Z-axis travel: 300 mm Weight: 6,500 kg Installed power: 26 kW Rated current: 77 A Power supply: 400 V – 3 Phase – 50 Hz

Condition: used, Year of construction: 2006, total height: 5,000 mm, total length: 7,500 mm, total width: 6,000 mm, overall weight: 45,000 kg, Machine No.: 10990003463Control SystemHeidenhain iTNC 530 (3D path control)Travel PathsX: 1,850 mmY: 2,000 mmZ: 1,100 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 25–12,000 rpmPower: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-slot tool magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lATC (Application Tuning Cycle)Laminated safety glass windowOperating mode 4 (process observation) Travel Z-axis: 1170 - mm Travel X-axis: 2000 - mm Dimensions (LxWxH) approx.: 7500 x 6000 x 5000 mm Travel Y-axis: 1800 - mm Weight approx.: 45,000 kg Year of construction: 2,006 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No Blsdjzhdrkepfx Amnsi

Condition: used, Year of construction: 2012, total height: 4,500 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 50,000 kg, Machine No.: 11720001123ControlHeidenh ain iTNC 530 HSCI (3D path control)Travel PathsX: 1,850 mmY: 2,100 mmZ: 1,250 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 20–12,000 min⁻¹Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-fold chain magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lRotating viewing window3D quickSETMachine Protection Control (MPC)Adaptive Feed Control (AFC)ATC (Application Tuning Cycle)DMG MORI NetServiceDMG MORI SMARTkeyDocumentation and electrical schematic (German) Dimensions (LxWxH) approx.: 8000 x 6000 x 4500 mm Bljdpozhdrdofx Amnei Travel Y-axis: 2100 - mm Weight approx.: 50,000 kg Travel Z-axis: 1250 - mm Travel X-axis: 1850 - mm Year of construction: 2,012 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2015, total height: 5,000 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 85,000 kg, Year of Manufacture: 2015 Machine No.: 12300000163Control SystemHeidenhain iTNC 530 HSCI (3D path control)Travel PathsX: 2,700 mmY: 2,700 mmZ: 1,600 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 2,200 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 20–12,000 min⁻¹Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Tool holder: SK50 according to DIN 69871Tool Changer63-slot wheel magazineDouble gripperEquipmentIKZ 40 barChip conveyorElectronic handwheelRotating viewing windowMinimum quantity lubrication (MQL)Coolant through spindleCoolant tank 980 lMold making packageActive chatter suppression (ACC)Adaptive feed control (AFC)Oil/emulsion mist separatorSmartkey packageAdditional safety viewing windows (Visiport)Operating mode 4 (process observation) Weight approx.: 85,000 kg Dimensions (LxWxH) approx.: 9000 x 6000 x 5000 mm Year of construction: 2,015 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works Blodpfx Amszhdq Tenei under power: No

Condition: excellent (used), Year of construction: 2011, CNC Control: FANUC Series 31i-A5 X axis travel mm: 730 Y axis travel mm: 510 Z axis travel mm: 510 B axis (degrees): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size mm: Ø500 Table load capacity kg: 300 Cutting feedrate mm/min (X, Y, Z): 50,000, 50,000, 40,000 Maximum rapid traverse m/min (X, Y, Z): 50, 50, 40 Spindle speed rpm: 12,000 Spindle power kW: 18.5 / 15 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Tool magazine capacity: 61 Max. tool diameter mm: 90 Max. tool diameter with adjacent positions empty: 125 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts: Included Work light: Included Through-spindle coolant Electronic handwheel integrated in CNC panel Coolant oil skimmer Tool life management 3D tool compensation Cylindrical interpolation Bsdeydh Hlopfx Amneli MORI-APM programming software MACHINE DIMENSIONS Length mm: 2,771 Width mm: 3,948 Height mm: 3,264 Weight kg: 12,400

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis: 650 mm Bljdpfjzapp Hsx Amnji Y-axis: 325 mm Z-axis: 350 mm B-axis: 130 degrees C-axis: 360 degrees Spindle speed: 30,000 rpm Spindle interface: HSK 50 Tool changer: 60 positions Control system: Makino Professional 5 Includes hybrid length measuring system Includes measuring probe Includes approximately 60 HSK 50 tool holders (MST + Rego Fix) Spindle has been replaced Ball screws for X and Y axes replaced in 2024 Machine currently has approximately 32,000 spindle hours and is still in active production Available from approximately week 46/2026 An inspection with the machine powered on can be arranged at any time.

Condition: excellent (used), Year of construction: 2019, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, Bledpfszd Eqaex Amnei 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Pallete changer EROWA not come. Bljdom Dtnrepfx Amnji

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 Bodpsytcl Ijfx Amnjli - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets