Used Moulder Line Automation With Stacker for sale (25,299)

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Cjdpfx Ajzv S D Reptehb Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. Chedpfewgbw Rjx Apteb 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers Codpfexb U Txsx Aptshb 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Chedpfszylxiox Apteb Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Chsdpezwdx Nefx Aptob Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press Chedpfx Apszhub Aetob - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: excellent (used), REF: MM6174 1 x Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd Codpfxsw E Ey Tj Aptshb ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Height - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Adjustable external electronic rewind Variable speed drive up to 450 meters per minute. • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Cedpoxpq T Rjfx Aptehb Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Guarding to suit current C.E. requirements

Condition: used, Year of construction: 2015, Bystronic CO2 laser with 6000W laser power including automation and storage system. Automatic pallet changer Byvision cnc control Automatic nozzle centering Regulated Pulse Piercing Nozzle cleaning Collision detection Cooling unit Filter unit More info and videos available on request. Csdpfx Aszdtyisptehb Viewing possible upon appointment. Immediately available. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Working dimensions: 3000 x 1500 mm Laser output: 6000W Automation (sorting and storage): ASTES4SORT (12 positions) Storage: TRAFO (12 storage positions) Power on: 41643h Cutting hours: 25394h

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW Codpfebqqzgjx Aptshb -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: new, INTEGRATED MODULAR SOLUTIONS FOR AUTOMATED CORRECTION BOX PRODUCTION Fully automated production lines for corrugated cardboard boxes Zemat Technology Group offers state-of-the-art, flexible, and fully automated production lines for corrugated cardboard boxes, engineered for the manufacturing of custom cartons. Key Benefits: - Fully customizable – Configurable to specific production requirements - Industry 4.0 ready – Integrated with JQS Job Queue System - High efficiency – Reduces production time and costs - Quick setup change – Less than 60 seconds setup time - Intelligent automation – Touchscreen HMI control with remote diagnostics via VPN Applications: - Shipping cartons - Custom pre-printed packaging - Special corrugated board boxes Why choose BOXMAT production lines? Cjdpowvifnefx Aptehb - Complete automation – From feeding to stacking - No special tools required – Fast setup & reduced downtime - Scalable & modular – Expand your production capacity as needed Increase your efficiency and streamline your workflow with the integrated modular solutions from Zemat Technology Group for the automatic production of corrugated cartons. Our cutting-edge production lines are designed for manufacturers demanding flexibility, precision, and automation.

Year of construction: 2000, condition: excellent (used), Weinig High-Mech A4 bundling system Bundle forming packaging unit possible to combine with other Weinig outfeed handling systems available from stock such as buffers and stackers. Consisting of 1. Weinig 815-300 high speed bundling unit Chodpfjq Rvrbjx Aptob 2. Weinig 812-200 outfeed roller conveyor with crossfeed 3. Control panel with Siemens S7-300 CPU

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Chodpfxozdnpxo Aptob Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).

Year of construction: 2025, condition: new, Automated pallet dispenser is the backbone of your automation processes. Loaded with up to 10 euro pallets (1200x800 or 1200x1200), it removes the need to prepare each pallet manually, saving time and reducing strain on employees. Instead, the unit dispenses pallets with a push of a button, or a pre-set algorithm onto a motorised roller conveyor, which transports them for further processing. PD-10 can be used in line with various palletising solutions. Fits up to 10 euro pallets Loaded up with a forklift Reduces physical strain Chedpfx Ashbg Uxoptjb Increases efficiency

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Chodpfsxvxqdsx Aptjb Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Codpfji D D Efjx Aptohb Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Custom modifications deviating from the standard model that were carried out for us: 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. Chodpfxjy Nmmij Aptsb 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. If you have any questions or require more information, please feel free to send us a message or call us.

Year of construction: 2013, condition: good (used), For Sale: Well-maintained in-line system for use behind a Multivac packaging machine. This in-line system ensures a transition from 4 tracks to 1 track and subsequently passes through a metal detector with an ejector. Brand: Automation Systems BV Type: Automation Systems BV in-line robot with a Mettler Toledo metal detector with ejector Robot type: BCE001 Year of manufacture: 2013, voltage: 400 V, 16 A It is possible to inspect this machine on-site. - Transport can be arranged. - Export documents will be provided if necessary. - Proper loading is included. If you have any questions or comments, please do not hesitate to contact us. Cedpezt Ib Tsfx Aptjhb

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Chsdpfx Aozrg T Esptob Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: good (used), mileage: 4,98,798 km, power: 478 kW (649.90 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, fridge, navigation system, onboard computer, parking heater, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler - Cab - Air suspension - Particulate filter - Auxiliary heater = Notes = Scania R650 Highline 6x4 - Manual gearbox with retarder - Full air - 2x tank Year of Manufacture: 20-7-2020 Mileage: 498798 YS2R6X40005591186 6x4 Manual gearbox Retarder Full air suspension 2x tank Navigation system Refrigerator = Further Information = Technical Information Number of cylinders: 8 Transmission Gearbox: Opti Cruise, 12 gears, automatic Axle Configuration Suspension: Air suspension Cedpfozmxn Djx Aptehb Front axle: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 315/70R22.5; Double tires; Max. axle load: 13000 kg; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Tire size: 315/70R22.5; Double tires; Max. axle load: 13000 kg; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Weights Unladen weight: 10,664 kg Payload: 24,335 kg GVWR: 34,999 kg Condition Technical condition: good Optical condition: good

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Codpfx Apezh S Ugstohb Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 45 kg, permissible axle load (axle 2): 45 kg, permissible axle load (axle 3): 45 kg, loading space width: 3,000 mm, loading space height: 1,170 mm, total width: 3,000 mm, total height: 1,170 mm, suspension: hydraulics, tire size: 215/75R17.5, wheelbase: 1,500 mm, color: red, Year of construction: 2026, Main Features Year: New Universal Gooseneck SH 35/2 Loading platform: 3,700 mm x 2,440 mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic support cylinders Coupling height: 1,450 mm Integrated lashing points Lashing rings Spare wheel + spare wheel holder Hydraulic locking pin Automatic lubrication for gooseneck with Beka-MAX pump Hatz Diesel PPU Hatz single-cylinder diesel engine (silent pack) @ 9.6 kW 240 L hydraulic oil tank, powder coated 35 l/min flow rate and max. working pressure of 250 bar Three sizes of quick couplers for pressure connection Three sizes of quick couplers for tank connection Electric RPM control THP SL 3 Max. axle load: 45,000 kg per axle Total axle load: 3 x 45,000 kg = 135,000 kg GVW: 135,000 kg Unladen weight: 10,650 kg Payload: 124,350 kg Total length: 4,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 4 Max. axle load: 45,000 kg per axle Total axle load: 4 x 45,000 kg = 180,000 kg GVW: 180,000 kg Unladen weight: 13,850 kg Payload: 166,150 kg Total length: 6,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 5 Max. axle load: 45,000 kg per axle Total axle load: 5 x 45,000 kg = 225,000 kg GVW: 225,000 kg Unladen weight: 17,250 kg Payload: 207,750 kg Total length: 7,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 6 Max. axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Unladen weight: 19,800 kg Payload: 250,200 kg Total length: 9,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Low Profile Deck FB 300 - 10,000 mm, without mechanical coupling, non-driveable - Payload rating in combination (6+6): 300 t - Height 300 mm, length 10,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - Bogies for modular configuration Chsdpfex S Evbsx Aptjb - Dead weight approx. 21,300 kg - Incl. hydraulic locking pin for connecting modular bogies lengthwise 1 x Low Profile Deck FB 250 - 8,000 mm, with mechanical coupling, non-driveable - Payload rating in combination (6+6): 170,000 kg - Height 250 mm, length 8,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - 1x extension for low profile deck, 4,000 mm - 1x extension for low profile deck, 5,000 mm General Information Year of construction: 2026 Axle Configuration Tyre size: 215/75 R17.5 Axle brand: BPW Eco Plus Suspension: hydraulic suspension Center axle 1: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 2: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 3: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 4: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 5: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 6: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Functional Deck height: 117 cm Extendable chassis: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Financial Information...

Condition: used, Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 9 kW (12.24 HP), We offer for sale a used LINKS S.r.l. automatic zig-zag cotton wool production and packing line, manufactured in Italy in 2011. Manufacturer: LINKS S.r.l., Italy Year of manufacture: 2011 Line configuration: Z/AP + ASA + L/CC Serial numbers: 300–301 The line is designed for the automatic production, zig-zag forming and packing of absorbent cotton wool in polyethylene bags. Technical specifications: Capacity: up to 25 packs/min at 100 g (approx. 1,500 packs/hour) Electrical power: 9 kW Power supply: 380 V / 50 Hz / 3-phase Operation: fully automatic cycle Operators required: 1 Packing/product formats: 50 g, 100 g and 200 g Equipment includes sets of forming/packing chambers for 50/100 g and 200 g Original technical documentation included The line consists of the Z/AP + ASA + L/CC units, covering the zig-zag forming, conveying and pressing stages and automatic packing process. Csdpozxnyyofx Aptshb Suitable for production of absorbent cotton wool, medical cotton wool and cosmetic cotton wool. The equipment is sold as used machinery. Further technical information, photographs and original documentation are available upon request. Please contact us for additional information, inspection arrangements or further photographs.

Condition: excellent (used), Catalogue number 7709 TECHNICAL DATA - Distance between first and third unit: 7400 mm - Max element width: 250 mm - Max bundle width: 1200 mm - Max bundle height: 1300 mm - Manual adjustment of unit spacing - Programmable number of elements per layer - Element counting - Total length of feed rollers: 10200 mm Csdpszxhfpsfx Aptohb - Feed roller speed adjustable by geared motor - Automatic interlayer insertion - Interlayer dimensions: 1200 x 18 mm - Interlayer magazine - Overall dimensions (L/W/H): 10200 x 2400 x 2500 mm - Weight approx. 3000 kg ADVANTAGES – German-made – 3 processing units – Robust construction – Untreated/Not repainted – Used machine, in very good condition Net price: 185,900 PLN Net price: 44,260 EUR (based on an exchange rate of 4.2 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: used, Year of construction: 2016, functionality: fully functional, We present a fully automatic EDGEBANDING LINE for sale! The line can be inspected in production at any time and is available immediately! HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL330/9/A3/WZ, year 2013 HOMAG FEEDING TABLE FLEXLINE PROFI TBL100/20/30/F, year 2013 HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL370/8/A3/WZ, year 2016 HOMAG DOUBLE ANGULAR TRANSFER CROSSWISE POWER TWL410/25/LQ, year 2016 PROFI KAL330 - Free Space Jointing Trimming Unit - Gluing Part A3 Basic - Free Space Processing Units - Finishing Unit FA11 Workpiece and edge parameters: - Workpiece width without edge min: in case of workpiece 60 mm* Thickness 12-22 mm Chjdpfx Apey Thlzotsb in case of workpiece Thickness 23-60 mm 100 mm* *depends on the workpiece length. - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm Thickness - Edging material on coil 0,3-3 mm - Edging mat. cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter 830 mm PROFI TBL100/20/30/F Fixed stop side on the left - incl. transport rollers - roller diameter 54 mm - roller distance approx. 60 mm - incl. lateral conveyor belt - electro pneumatically controlled crosswise fence - adjustable infeed fence, manually via counter - incl. kit for small parts - incl. integrated air cushion table Workpiece parameters: - Panel length: min. 240 mm/ max. 2500 mm - Panel width: min. 120 mm/ max. (TBL../20/30) 3000 mm PROFI KAL370 - Free space Jointing Trimming unit - Gluing part A3 basic - Free space processing units - Finishing unit FA21 Workpiece and edge parameters: Workpiece width without edge min: in case of workpiece 60 mm* (thickness 12-22 mm) in case of workpiece 100 mm* (thickness 23-60 m) *depends on the workpiece length - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm thickness - Edging material on coil 0,3-3 mm - Edging mat.cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter max. ¦ 830 mm POWER TWL410/25/LQ - Fixed stop side infeed: left, outfeed: left - Roller diameter 64 mm - Roller distance 110 mm - Infeed roller track with belt conveyor and cross transport - Cross conveyor belt controlled - Outfeed roller track - Cross conveyor belt controlled - Stop fence electro pneumatically controlled - Transport belt lateral - Modification of panel overhang manually adjustable Workpiece parameters: - Panel length min. 240 mm/ max. (TDL../25/..) 2500 mm - Panel width min. 240 mm - Panel thickness min. 8 mm/ max. 60 mm - Panel weight max. 80 kg