Used Mp150 Workshop Washer for sale (6,366)

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Parts Washer The AURORA MP150 pressure parts washer is a compact workshop cleaning machine designed for cleaning mechanical parts, tools, and components. The enclosed working cabinet helps reduce liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other stubborn contaminants. The parts washer uses a closed-loop cleaning solution system, allowing the cleaning fluid to be reused during ongoing work. The dual-function pneumatic gun enables both cleaning with a mixture of cleaning solution and compressed air and subsequent blow-off and drying of cleaned components. AURORA MP150 Workshop Parts Washer – Key Advantages 5–8 bar operating pressure – effectively removes oil, grease, carbon deposits, and other contaminants, including from hard-to-reach areas. Dual-function pneumatic gun – enables cleaning with cleaning solution and compressed air, as well as blow-off cleaning using compressed air alone. Closed-loop cleaning solution system – helps reduce cleaning agent consumption during regular operation. Working cabinet lighting – provides better visibility of cleaned surfaces, openings, and hard-to-reach areas. Integrated work gloves – make it easier to handle components without opening the cabinet. Lid support cylinders – make opening and closing the working chamber easier. Cabinet ventilation – supports air circulation while the machine is operating. Compact benchtop design – the parts washer can be placed on a stable and sufficiently strong table or workbench. Parts Cleaning Concentrate Included The MP150 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer with Dual-Function Pneumatic Gun The AURORA MP150 is equipped with a pneumatic gun featuring two operating modes, allowing a single device to perform both thorough cleaning and blow-off drying of components. In cleaning mode, a mixture of cleaning solution and compressed air is discharged from the nozzle. The pressurized stream helps remove contaminants from openings, channels, recesses, and surfaces with complex shapes. After cleaning, the gun can be switched to blow-off mode. Compressed air removes residual cleaning solution from surfaces and hard-to-reach areas, making it easier to prepare components for further use, inspection, repair, or assembly. The AURORA MP150 Parts Washer Comes as Standard With Dual-function pneumatic gun Integrated work gloves Interior cabinet lighting Ventilation system Lid support cylinders Compressed air supply adjustment 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 150 l Bdodjztwg Sjpfx Abtog Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun Dual-function pneumatic Cabinet lighting Yes Ventilation Yes

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Cabinet Washer is a compact cleaning device designed for washing mechanical parts, tools, and workshop components. The enclosed cabinet limits liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other difficult contaminants. Cleaning is performed using a closed-loop circulating cleaning fluid system. The pneumatic gun allows the operator to apply a mixture of cleaning fluid and compressed air, and after the cleaning process it can also be used for blowing and drying the component. Main advantages of the AURORA MP150 washer Operating pressure of 5–8 bar – effective removal of oil, grease, carbon deposits, and dirt from hard-to-reach areas. Two-function pneumatic gun – enables cleaning with a mixture of fluid and air, as well as drying components using compressed air only. Closed-loop fluid circulation – reduces cleaning agent consumption during regular operation. Internal cabinet lighting – improves visibility of cleaned surfaces and difficult-to-access areas. Integrated protective gloves – allow convenient handling of components without opening the cabinet. Gas struts supporting the lid – make opening and closing the working chamber easier. Cabinet ventilation system – improves working conditions inside the machine. Compact design – allows installation on a suitable workbench or sturdy table. Cleaning and drying with one gun The AURORA MP150 cabinet washer is equipped with a pneumatic gun offering two operating modes. During cleaning, the nozzle delivers a mixture of compressed air and cleaning fluid, helping remove contaminants from holes, channels, recesses, and complex-shaped surfaces. After cleaning, the operator can switch the gun to compressed-air mode. This allows removal of remaining fluid residues and faster preparation of the component for further work, inspection, repair, or assembly. Enclosed and illuminated working cabinet The cleaning process takes place inside a closed chamber, which helps reduce splashing of the cleaning solution around the workstation. Integrated gloves allow free rotation and positioning of the cleaned component without opening the lid. The built-in cabinet lighting improves visibility of the workpiece, allowing the operator to accurately control the cleaning process on dirty surfaces, openings, and hard-to-reach areas. Closed-loop cleaning fluid system Cleaning is performed in a closed circulation system using fluid stored in the machine’s tank. The tank capacity is 8–14 liters. This solution allows repeated use of the cleaning agent and reduces fluid consumption during everyday workshop operations. The simple fluid replacement system makes draining and preparing the washer for further use easier. Standard equipment Two-function pneumatic cleaning gun Protective gloves integrated into the cabinet Internal cabinet lighting Ventilation system Gas struts supporting lid opening Compressed air supply adjustment system Technical specifications – AURORA MP150 pressure cabinet washer Parameter Specification Cabinet capacity 150 L Cleaning fluid tank capacity 8–14 L Operating pressure 5–8 bar Bedpfxovugwmo Abtjdg Dimensions 770 × 610 × 700 mm Weight 29 kg Gun type Pneumatic, two-function Cabinet lighting Yes Ventilation Yes

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Washer The 140L parts washer is a professional workshop cleaning machine designed for the effective removal of oil, grease, deposits, and other stubborn contaminants from mechanical parts and components. The closed-loop cleaning solution system allows for efficient use of the cleaning fluid while reducing consumption. The large tank capacity, robust construction, and convenient working area make the 140L workshop parts washer an excellent choice for mechanical workshops, automotive service centers, manufacturing facilities, and maintenance departments. Key Advantages of the 140L Workshop Parts Washer 140-liter tank capacity – provides ample space for cleaning larger parts and components. Up to 90 liters of cleaning solution – the large working fluid capacity allows for longer operation without frequent refilling. Efficient 2.7–3.6 l/min pump – enables precise application of the cleaning solution to the components being cleaned. Closed-loop system – allows the cleaning solution to be reused and helps reduce consumption. Automatic lid lock – improves operator safety and convenience. Stable four-leg construction – provides excellent stability during operation. Practical work surface – provides a convenient place to put tools, parts, and accessories. Parts Cleaning Concentrate Included The MP140 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer Construction and Operating Principle The 140L parts washer is equipped with a flexible hose fitted with a spray nozzle. The cleaning solution is drawn from the tank and delivered through the pump to the hose, allowing the operator to precisely direct the stream onto contaminated surfaces. Bdjdpfxeztwh Ao Abtjg For proper operation, the pump inlet must be completely submerged in the cleaning solution. This ensures an adequate flow of cleaning fluid during operation. The tank lid opens conveniently and automatically locks in the raised position, improving operator safety. The entire unit is mounted on a robust steel frame with four legs, providing stability even during intensive use. With dimensions of 1,130 × 540 × 885 mm, the parts washer can be installed in most workshop environments while still providing a large and practical working area. Standard Equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Work surface beneath the tank Assembly and operating instructions 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Tank capacity 140 l Maximum cleaning solution capacity 90 l Pump flow rate 2.7–3.6 l/min Power supply 230 V Overall dimensions 1,130 × 540 × 885 mm Working tray dimensions 800 × 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MP180 Pressure Parts Washer The CORMAK MP180 pressure parts washer is a professional industrial cleaning machine designed for the effective removal of heavy dirt from mechanical, metal, and industrial components. The combination of high pressure, heated cleaning solution, and a stainless steel construction ensures excellent cleaning performance, durability, and convenience in everyday operation. Bodpfxeztwa So Abtjdg The closed-loop cleaning solution system allows for economical use of the cleaning agent, while the ability to heat the liquid to a temperature of up to 70°C increases the effectiveness of removing stubborn contaminants such as oils, grease, fats, carbon deposits, and other residues. The MP180 parts washer has been designed for professional workshops, service centers, and industrial facilities where precision, durability, and cleaning efficiency are essential. Key Advantages of the MP180 Parts Washer Closed-loop cleaning system with heated cleaning solution – effective removal of stubborn contaminants thanks to an operating temperature of up to 70°C. High operating pressure of up to 8 bar – enables thorough cleaning of hard-to-reach surfaces and heavily soiled components. Stainless steel construction – provides excellent resistance to corrosion, moisture, and intensive use. Dual-function cleaning gun – allows operation using compressed air alone or a mixture of air and cleaning solution, as well as drying components after washing. Adjustable leveling feet – ensure stable positioning of the machine even on uneven surfaces. Parts Cleaning Concentrate Included The MP180 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 MP180 Construction and Technology The MP180 parts washer is equipped with a spacious working chamber and a cleaning solution heating system. The elevated liquid temperature increases the effectiveness of the cleaning process and helps remove stubborn contaminants more quickly. The robust stainless steel construction provides excellent resistance to moisture, dirt, and demanding working conditions. This makes the machine suitable for regular use in workshops, service centers, and industrial facilities. Standard Equipment Dual-function gun – air / liquid + air Cleaning solution heating system 180-liter working chamber Stainless steel construction Adjustable leveling feet 2 liters of concentrate for workshop parts washers Technical Specifications Parts washer capacity 180 l Voltage 230 V Frequency 50 Hz Weight 56 kg Height with legs 1,450 mm Height without legs 920 mm Internal width 740 mm Internal height to open lid 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Cleaning Cabinet Washer The 140L parts cleaning cabinet washer is a professional workshop device designed for effective removal of oils, greases, deposits, and stubborn contaminants from metal and mechanical components. Operating in a closed-loop system, the machine uses cleaning fluid efficiently and economically. Thanks to its large tank capacity and stable construction, it is an ideal solution for industrial plants, workshops, and service facilities. Main advantages of the 140L workshop parts washer Maximum cleaning fluid capacity: 90 liters – allows long, continuous operation without frequent refilling of cleaning agent. Pump flow rate of 2.7–3.6 l/min – ensures precise cleaning of hard-to-reach areas and surfaces with micro-cracks. Large 140-liter tank – enables cleaning of larger machine and equipment components. Closed-loop fluid circulation system – economical use of cleaning liquid, reduced waste, and a cleaner working environment. Automatically locking lid – ensures safe operation during cleaning processes. Stable four-leg construction – provides optimal working height and safe operating conditions. Practical working shelf under the tank – convenient space for drying parts or storing tools. Design and technology The parts washer is equipped with a flexible hose with a spray nozzle, through which the cleaning fluid is delivered under pressure from the bottom of the tank. To ensure optimal performance, the pump inlet must remain completely submerged. The tank lid opens smoothly and locks automatically, increasing operator safety. The robust frame and four supporting legs provide excellent stability, even during intensive use. The well-thought-out design and compact dimensions (1130 x 540 x 885 mm) allow the unit to fit into most workshop spaces while providing a large working area for cleaning bigger components. Precision and cleaning efficiency The high-performance pump, with a flow rate of up to 3.6 liters per minute, combined with the closed-loop system, enables continuous and efficient operation with minimal fluid consumption. The cleaning solution penetrates even microscopic gaps, allowing thorough removal of contaminants from metal, cast iron, steel, and aluminum parts. The machine is designed for use with water-based detergents – cleaning effectiveness depends on the type and quality of the cleaning agent used. Applications The 140L parts cleaning cabinet washer is designed for professional applications in: automotive workshops, repair and maintenance services, mechanical workshops, manufacturing facilities. It is suitable for cleaning: machine parts, tools, engine components, hydraulic system elements, Bdederh Ey Rjpfx Abtsg technical components requiring thorough cleaning before regeneration, repair, or assembly. Standard equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Working shelf underneath the tank Assembly and operating manual Technical specifications Parameter Value Tank capacity 140 L Maximum cleaning fluid volume 90 L Maximum pump capacity 2.7–3.6 l/min Power supply 230 V External dimensions 1130 x 540 x 885 mm Working tray dimensions 800 x 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, MP180 Pressure Cabinet Washer is an industrial cleaning device designed for washing heavily contaminated mechanical, metal, and industrial components. Thanks to pressure cleaning technology and a stainless steel construction, the machine provides high durability, efficiency, and safe operation even under demanding working conditions. The closed-loop system and the ability to heat the cleaning fluid up to 70°C enable effective removal of grease, oils, carbon deposits, and other stubborn contaminants. Main advantages of the MP180 washer Closed-loop system with heated cleaning fluid – improved removal of difficult contaminants at temperatures up to 70°C. Pressure up to 8 bar – effective cleaning of hard-to-reach areas and heavily contaminated components. High-quality stainless steel construction – corrosion and mechanical damage resistance, ideal for long-term industrial use. Two-function gun – allows selection between compressed air only or cleaning fluid mixed with air, also enabling component drying. Adjustable leveling feet – precise machine positioning even on uneven surfaces. Construction and technology The MP180 cabinet washer has been designed for maximum functionality in industrial environments. The design of the washing chamber and the integrated fluid heating system allows maintaining a constant cleaning temperature, significantly increasing washing efficiency. The pressure gun with an adjustable operating mode enables both cleaning and drying with compressed air. All components that come into contact with liquids are made of materials resistant to aggressive cleaning agents and chemicals. Precision and work efficiency Thanks to high cleaning pressure and elevated operating temperature, the MP180 pressure washer enables thorough removal of even stubborn contaminants from components with complex geometries. The operator has full control over the cleaning process – from adjusting the intensity of the spray stream to drying the cleaned parts. The 180-liter working chamber allows comfortable cleaning of medium-sized components without the need to disassemble them into smaller parts. Applications The MP180 pressure cabinet washer is suitable for: Bjdpjuc Tpyjfx Abtodg Automotive workshops, Industrial plants, Machinery service centers, Manufacturing facilities. It is ideal for cleaning: Engine components, Gearboxes and transmission parts, Valves, Pump housings, Hydraulic system components, Other metal parts requiring intensive cleaning. Thanks to its corrosion resistance and high durability, the machine is suitable for long-term operation in chemically demanding environments. Standard equipment Two-function gun (air / cleaning fluid + air) Cleaning fluid heating system Built-in 180-liter tank Stainless steel working chamber Adjustable leveling feet Technical specifications – MP180 pressure cabinet washer Parameter Specification Washer capacity 180 L Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Year of construction: 2025, condition: new, A workshop cabin washer made of stainless steel AISI 304 and acid-resistant AISI 316, designed for professional use in a broad range of industries and automotive applications. It operates in a closed-loop system at temperatures up to 45°C. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, in combination with the optimal temperature and pressure from the spray gun nozzle, easily removes all types of dirt. Standard equipment includes a compressed air gun and a low-pressure overflow brush. The washer is equipped with a 90-liter tank, a pneumatically lifted washing chamber, and adjustable height for user convenience. STANDARD EQUIPMENT: - High-pressure nozzle up to 140 bar - Low-pressure brush with 5 L/min flow rate - Compressed air gun up to 8 bar - Heated 90-liter fluid tank - LED lighting - Air blower for viewing window - Pneumatic chamber opening mechanism - Sensors for liquid level and temperature - Dual liquid filtration system - Integrated oil separator (effectively separates oil contamination from the water in the washer tank) - Dual foot-operated switches - Adjustable height feet with a range of up to 100 mm - Entirely made of stainless steel - Safety rating: IP 54 - XPOWER Active Cleaner fluid, 5L (two types available) OPTIONAL ADD-ONS FOR THE MASTER CLEANER MC1000: - Spray arm Bdedpfx Abogvaazstjg - Rotating basket - Rotary nozzle - Manifold cleaning nozzle - Tank insulation TECHNICAL SPECIFICATIONS: - External dimensions with open chamber (cm): 125 x 85 x 235 - External dimensions with closed chamber (cm): 125 x 85 x 170 - Chamber dimensions (cm): 100 x 64 x 74 - Power supply: 3 x 400 V - Pneumatic system pressure: 6 - 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Fluid operating temperature: up to 45°C - Air connection: pneumatic quick coupling DN 7.2 plug - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 DIFFERENT MACHINE VARIANTS AVAILABLE CONTACT US TO LEARN MORE ABOUT THE OTHER MODELS.

Condition: new, Year of construction: 2025, overall weight: 230 kg, water tank capacity: 110 l, Workshop Cabin Washer, constructed from stainless steel AISI 304 and acid-resistant steel AISI 316, designed for professional use in various industries and automotive applications. It is used to remove heavy dirt without damaging the surface of the cleaned element. Operates in a closed-loop system at temperatures up to 45°C. The working table width is 150 cm. The washer is equipped with a 110-liter tank that can be optionally thermally insulated to prevent the heated fluid from cooling too quickly. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, combined with the appropriate temperature and pressure from the spray gun nozzle, effortlessly removes all kinds of dirt. Standard equipment includes a high-pressure lance up to 140 bar, a compressed air gun, and a low-pressure overflow brush. The washer chamber is pneumatically lifted, with adjustable height, bright lighting, and air ventilation for the window to ensure user convenience. The design and construction of the Master Cleaner MC 1500 adhere to the highest quality standards, ISO 9001, and environmental protection standards, ISO 14001. It is ideal for removing dirt from steel, cast iron, and aluminum surfaces. The Master Cleaner MC1500 is equipped with a dedicated oil separator that effectively removes oil contaminants from the water in the washer’s tank. EQUIPMENT: - High-pressure nozzle: 140 bar - Low-pressure brush: up to 5 L/min - Compressed air gun: up to 8 bar - Air ventilation for the viewing window - LED lighting - Pneumatic chamber opening mechanism - Heated 110-liter tank - Dual liquid filtration system Bodjri Rn Uopfx Abtodg - Oil separator - Liquid level and temperature sensors - Adjustable height feet: up to 100 mm - Dual foot switch - XPOWER Active Cleaner (5L starter pack) OPTIONAL FEATURES: - Rotating basket - Spray arm - Rotary nozzle - Manifold cleaning nozzle - Thermal insulation for the tank TECHNICAL SPECIFICATIONS: - Weight: 230 kg - External dimensions - Open chamber (W x D x H): 175 x 85 x 235 cm - External dimensions - Closed chamber (W x D x H): 175 x 85 x 170 cm - Chamber dimensions (W x D x H): 150 x 64 x 65 cm - Heated fluid tank: 110 liters - Operating temperature: up to 45°C - Power supply: 3 x 400 V - Pneumatic power supply: 6 - 8 bar - Maximum power: 7.5 kW - Operating pump pressure: 140 bar - Dual liquid filtration system: Yes - High-pressure lance capacity: up to 15 L/min - Air connection: Pneumatic quick coupling DN7.2 plug - Manual washing with overflow brush: up to 5 L/min - Dual foot switch: Yes - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE MULTIPLE MODELS AVAILABLE - CONTACT US TO LEARN MORE.

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. Bedpfx Aboq Nf S Rstsdg 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Bodpfxezlr N So Abtjdg

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Bodpfx Ajy I Nugsbtedg Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak Bdodpfoy H Aizex Abtog • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bdjdpfxoxpxyrj Abtjg Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Bdodpfx Abeflpmqetjg The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Bodpfx Aefz Dvvebtodg • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible Bdodpfxefzraps Abtsg The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Bsdefz Ax Sjpfx Abtodg High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Bdsdpfx Abefz A D Netog • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bdedpjxp Urdofx Abteg Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: excellent (used), Year of construction: 2023, 462 USED Hobart bakery washer, dishwasher with water softener. TECHNICAL DATA: - year of production: 2023 - equipped with a water softener EXTERNAL DIMENSIONS (in cm): - width 138 - length 95 (135 with door open) - height 202 (244 with door open) INTERNAL DIMENSIONS (in cm): - width 122 - length 68 - height 84 (for spray arms) Paid options available: transport of the device. The price is a net price. Bsdpfxszxn A Ij Abtjdg Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% - Central lubrication - Originally painted - Tool box MOBILE SAND MAKER Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm Bsdpfxsx D A H Ee Abtedg FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers...

Condition: good (used), functionality: fully functional, Subject to differential taxation according to §25a of the German VAT Act. You will receive a regular invoice. Internal article number: 26057 Lathe Weiler Matador + Multifix "A" baseplate + 3-jaw chuck + Collets + Coolant pump Center height approx. 150mm Turning diameter over carriage 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Bdodpfezx R R Iox Abtog Speed range 30 - 3500 rpm Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: used, Used workshop containers offered from Korbach, Germany. CONTAINER TYPE: Workshop container, office container CONDITION ON DELIVERY: Used, fully functional EQUIPMENT: - Exterior lighting - Heating - Fire extinguisher - Ramp - Electric roller shutter door - Electrical system 65 Amp. - Three-phase power connection Bodpfjzxpqmjx Abtodg DIMENSIONS (LxWxH): approx. 5 x 4.05 x 4.20 m Weight: 7,000 kg DELIVERY: approx. 2 weeks lead time TRANSPORT: Please provide your postcode so that we can offer you a free and non-binding quotation including delivery and, if necessary, unloading from the truck. SELECTION: In addition, we offer sea containers in all standard sizes (20DV, 40DV, 20HC, 40HC...) for any application, whether for storage, construction projects, logistics solutions, or sea transport. We look forward to your inquiry! NAUTEXA GmbH

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 133 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, MYJKA GORĄCOWODNA KARCHER HDS 995 M ECO Urządzenie posiada nowy osprzęt, w tym pistolet niemiecki marki R+M, lanca ze stali pochodzącej, wąż w oplocie stalowym oraz dysza mocy 25° Mosiężna, wytrzymała głowica z tłokami ceramicznymi oraz uszczelniaczami zatwierdzonymi przez i bezawaryjną trwałość Bardzo funkcjonalny, trójfazowy silnik zapewnia stabilną funkcjonalność przy zastosowaniu użytkowym Dzięki parametrom pracy 180bar oraz 1000l/h maszyna może być skutecznie używana do stosowania w praktyce w budownictwie, pojęcia logistyce oraz rolnictwie Każde urządzenie przez nas posiada urządzenie robione zdjęcia, kupujesz dokładnie tę maszynę, która jest umieszczona Bdjdszx Txzjpfx Abtsg DANE TECHNICZNE: Napięcie zasilania [V]: 400 ~3 faz Wydajność tłoczenia [l/h]: 1000 wytrzymałość robocza [bar]: 180 Maks. temp. podgrzewania [°C]: 98-155 Moc przechowywania [kW]: 6,8 Zbiornik środka czyszczącego [l]: 20 Długość odcinka [m]: 10 Waga [kg]: 133 WYPOSAŻENIE: NOWY pistolet ciśnieniowy niemieckiej marki R+M NOWA lanca ciśnieniowa ze stali podanej NOWY wzmocniony wąż ciśnieniowy w oplocie stalowym 10m NOWA dysza o mocy 25° Filtr wody i odpadków kłowych GEKa - GRATIS NAJWAŻNIEJSZE CECHY: Otwarty układ olejowy - brak ograniczenia czasu pracy Wbudowany zbiornik chemii umożliwia dozowanie pozostałości czyszczącego bezpośrednio przez maszynę Bardzo czytelny i wygodny w wygodnym panelu kontrolnym Prosta budowa oraz dobry dostęp do poszczególnych elementów pod obudową, że maszyna jest przyjazna dla użytkownika oraz dostarczana do serwisowania Zbiornik na płyn zmiękczający wodę RM110 zapobiega korozji i gromadzeniu się kamienia wewnątrz wężowników odprowadzających oraz odprowadzających.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, KARCHER HDS SUPER HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98/155 Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 Bodozxxuhjpfx Abtsdg EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dosing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.