Used Multi-Trans Val30 for sale (9,246)

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Cedpfx Apoxrtdqjtorg Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: Crjdpfx Apjxrtb Notjg The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Main frame: Robust welded construction made of profile steel sections. Cedpfxsxrtqwe Aptjrg Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Robust welded construction made of profile steel sections. Loading Area: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Cedpfxoxrtgfe Aptorg Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 197 h, load capacity: 40,000 kg, fuel type: electric, battery model: EPzS, battery capacity: 1,250 Ah, battery voltage: 80 V, overall weight: 53,500 kg, empty load weight: 13,500 kg, total height: 2,750 mm, total length: 8,210 mm, total width: 2,500 mm, color: grey, Equipment: CE marking, UVV, air conditioning, cabin, lighting, with TÜV inspection report for obtaining an exemption permit according to § 70 of the StVZO (Road Traffic Licensing Regulations) for use on public roads. Current battery condition reports from July 31, 2026. Loading area: clear loading area behind the cabin approx. 6660 x 2490 mm Loading height: approx. 1000 mm Loading area cover: diamond-patterned sheet metal Steering: two-axle steering Driving hours: 197 Battery: 2 units (exchange battery) 80 V 10 EPzS 1250 Ah, K5 Technical condition: very good Optical condition: very good Operating conditions: level, paved road in internal traffic 90° curve from 4800 mm to 4800 mm road width, inner corner approx. 1200 x 1200 mm beveled, theoretically possible to navigate with approx. 50 mm clearance to the driving width, practically not navigable gradient of approx. 5% over a length of approx. 10 m indoor and outdoor use with approx. 10 km total distance per day two-shift operation on 6 days a week Payload: 40 t at 6 km/h in internal factory traffic Load distribution front and rear approx. 70:30 Loading area: External dimensions of the vehicle approx. 8200 x 2500 mm clear loading area behind the cabin approx. 6660 x 2490 mm Loading height approx. 1000 mm Loading area with diamond-patterned sheet metal cover Chassis: two steered axle lines with two swing axles each, and two non-steered, driven axle lines mounted on four longitudinal rocker arms uniform wheel load distribution via swing axles or longitudinal rocker arms Drive wheels with track-free, elastic solid rubber tires approx. Dm 559 x 406 mm Wheels on the swing axles 457 x 304 (2×152) Wheel hubs with tapered roller bearing and permanent grease lubrication Drive and control: Wheel hub three-phase motors 80V approx. 4 x 6.4 KW with electronic differential function to which the drive wheels are mounted Driving speed adjustable continuously via foot pedal Dual AC pulse control system for drive and steering Control cabinet located on one longitudinal side of the platform truck Vehicle electrical system: entire vehicle electrical system (excluding 80V drive) designed for 24V via voltage converter Front headlights with rear and brake lights as well as turn signals. Reflectors mounted on the front, rear, and both longitudinal sides in accordance with StVZO. Battery and charger variant: for payload 25t + 12t self-weight = total weight 37t 7 – 8 h charging time Range per battery > 6,000 m 1200 charge cycles 1 x battery 80 V 10 EPzS 1250 Ah, K5 1 x exchange battery 80 V 10 EPzS 1250 Ah, K5 stationary charger D 80/180 Codpfx Apsyrf Uioterg Electrolyte circulation Aquamatik Additional equipment: behind the cabin on the left longitudinal side in the direction of travel, an access to the loading area, a pluggable or fixed handrail, storage space for the non-plugged handrail attached to the vehicle a 300 mm high stop bar attached to the front end the vehicle can be maneuvered from the cabin or via a radio-controlled hand-held remote control outside the cabin on both longitudinal sides, 9 lashing eyes/crane bars made of round steel are welded horizontally into the outer supports Ultrasonic sensors for distance measurement (object detection, not a personal protection device), creep speed and emergency stop shutdown variably adjustable. Rear view camera system with screen Safety devices: 2 emergency stop buttons on the rear

Condition: ready for operation (used), Heavy-duty trailer / industrial trailer Multitrans ARL-4PA-1550 – 50 t payload – Year of manufacture 2009 For sale is a heavy-duty trailer / industrial trailer from the brand Multitrans, model ARL-4PA-1550, with a payload of 50,000 kg. The trailer is overall in good used condition. Age-related and usage-related signs of wear are present. The exact visual condition can be seen in the attached pictures. Technical data * Manufacturer: Multitrans * Model / Type: ARL-4PA-1550 * Year of manufacture: 2009 * Design: Heavy-duty trailer / industrial trailer * Payload: 50,000 kg * Tare weight: approx. 12,000 kg * Loading area length: approx. 8,000 mm * Loading area width: approx. 3,000 mm * Loading height: approx. 60 mm * Loading area surface: Pine wood covering and 8 mm tear plate * Vehicle identification number: 15462/001 Condition Crodpszxgq Rsfx Apteg The heavy-duty trailer is used and is overall in good condition. Normal signs of wear and tear are present. Condition and visual appearance can be seen in the pictures. With a payload of 50 tons and a loading area of approx. 8,000 × 3,000 mm, the trailer is ideal for the internal transport of heavy machinery, equipment and other heavy loads. The robust loading area structure with pine wood covering and 8 mm tear plate offers a durable and practical loading area for industrial use. Inspection is possible by prior arrangement. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: ready for operation (used), Heavy-duty trailer / industrial trailer Multitrans VAL 725 – 20 t payload – Year of manufacture 2010 For sale is a heavy-duty trailer / industrial trailer from the brand Multitrans, model VAL 725, with a payload of 20,000 kg. The trailer is in good used condition overall. There are signs of wear and tear consistent with age and use. The exact visual condition can be seen in the attached pictures. Technical data * Manufacturer: Multitrans * Model / Type: VAL 725 * Year of manufacture: 2010 * Design: Heavy-duty trailer / industrial trailer * Payload: 20,000 kg * Tare weight: 3,450 kg * Permissible total weight: 23,450 kg * Permissible axle load, front: 11,800 kg * Permissible axle load, rear: 11,800 kg * Loading area length: approx. 6,000 mm * Loading area width: approx. 2,200 mm * Height: approx. 750 mm * Vehicle identification number: 15620/001 Condition The heavy-duty trailer is used and in good condition overall. Normal signs of wear and tear are present. Condition and visual appearance, see pictures. Due to its high payload capacity, the Multitrans VAL 725 is ideally suited for the internal transport of heavy machinery, equipment and other loads. An inspection is possible after prior arrangement. Csdpfjzxgm Sex Aptjrg If you are interested or have any further questions, please do not hesitate to contact us.

Condition: ready for operation (used), machine/vehicle number: 15466/002, empty load weight: 1,250 kg, maximum load weight: 5,000 kg, overall weight: 6,250 kg, Year of construction: 2009, Heavy-duty trailer / industrial trailer Multitrans VAL 16 – 5 t payload – Year of manufacture 2009 For sale is a heavy-duty trailer / industrial trailer from the brand Multitrans, model VAL 16, with a payload of 5,000 kg. The trailer is in good used condition overall. Signs of wear and tear consistent with age and use are present. The exact visual condition can be seen in the attached pictures. Technical data * Manufacturer: Multitrans * Model: VAL 16 * Year of manufacture: 2009 * Type: Heavy-duty trailer / industrial trailer * Payload: 5,000 kg * Tare weight: 1,250 kg * Permissible total weight: 6,250 kg * Permissible front axle load: 3,200 kg * Permissible rear axle load: 3,200 kg * Loading area length: approx. 5,000 mm * Loading area width: approx. 2,000 mm * Height: approx. 560 mm * Vehicle identification number: 15466/002 Condition The heavy-duty trailer is used and in good condition overall. Normal signs of wear and tear are present. Codpfezxggxox Apterg Condition and visual appearance can be seen in the pictures. The trailer is ideal for internal transport of machines, equipment and other heavy loads. An inspection is possible after prior arrangement. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, load capacity: 25,000 kg, Equipment: UVV, - Towing capacity: maximum 25,000 kg - Bed size: 1,955 x 1,170 (1,120 at the rear) Crodpfx Aszmttbspteg - Bed height: 1,000 mm - Drive: 2 x 10 kW electric motor, 80 V / 930 Ah - Features: optimal maneuverability, robust and reliable

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Codpfx Apouf Rw Tstsrg Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: excellent (used), total length: 10,000 mm, total width: 2,400 mm, total height: 975 mm, color: blue, Operating conditions: The trailer is designed for use on flat, paved surfaces in in-plant traffic. Combined operation: The trailer components are not (without a coupling) designed for combined operation with multiple trailers. Payload: 32 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are permissible only upon prior approval. Loading platform: Dimensions approx. 10,000×2,400 mm, loading height approx. 975 mm, platform surface covered with softwood planks, all-around edge protection. Credjxrtkwepfx Aptsg Steering: Front turntable steering, tow bar can be raised and detached, coupling height on towing vehicle approx. 350–500 mm, towing eye according to DIN 74054, diameter 40 mm, tow bar fall protection as per accident prevention regulations (UVV). Chassis: 2 steered and 2 rigid pendulum axles, wheels with elastic solid rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue. Additional equipment: On each long side, 2 horizontal round steel lashing sleeves welded into the outer frame.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Cedexrtluopfx Aptsrg Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: excellent (used), functionality: fully functional, load capacity: 60,000 kg, Equipment: UVV, cabin, Rental and purchase possible Credpfx Asyrf T Eeptsg

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. Cjdpfxeq Nd Rbo Apterg 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: used, functionality: fully functional, In this offer you purchase a used Multi Purpose Stacker "Plockmatic MPS" Crsdewnqp Ejpfx Apteg Object of sale: 1 x Plockmatic MPS Type F139-101 Fits other Plockmatic finishing machines Fits various Canon / Ricoh machines Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping are available on request! For further information you can of course also contact us personally.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min Crsdpfozrpt Usx Aptjg distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, maximum load weight: 509 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,950 mm, loading space width: 1,600 mm, loading space height: 120 mm, total width: 2,240 mm, total height: 830 mm, Multitransporter 3016, manufacturer TEMARED, model DMC, gross weight: 750 kg, 295x160 cm, with overrun brake, 100 km/h (accessory), with foldable loading ramp (accessory), low loader, height-adjustable. Subject to errors and prior sale. Codpfxeym Ih Is Aptorg

Condition: used, This listing is for Bio-Rad Trans-Blot Turbo 690BR Transfer System The unit is in full working condition and ready for immediate use The Trans-Blot Turbo is a rapid protein transfer system designed for transferring proteins from electrophoresis gels to membranes for Western blotting. It provides a compact, efficient solution for routine laboratory protein analysis Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Credpfx Apsztpubotsg This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Floor cleaners, floor preparation products, floor coating -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer Csdpfx Apsqyi Unotjrg -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Condition: good (used), mobile welding fume filters, welding fume extraction Csdpeb A Ng Isfx Aptjrg -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg

Condition: used, functionality: fully functional, Simatic Multi Panel Touch Siemens Siemens MP 277 10-inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 units Condition: Used Cjdpfx Aswg Tmdsptsrg Price per unit External width: approx. 330 mm External depth: approx. 275 mm Internal width: approx. 305 mm Internal depth: approx. 245 mm Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system has been in operation until dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have successfully implemented projects for companies in a wide range of industries, including logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: good (used), Year of construction: 2004, functionality: fully functional, We are offering this well-maintained Multi Weigh, Delta Pack MKW: HDW10 3.5 pouch filling machine: DE420 FU multi-head weigher with pouch filling machine, manufactured in 2004. Manufacturer: Multi Weigh, Delta Pack Model: MKW: HDW10 3.5 pouch filling machine: DE420 FU Year of manufacture: 2004 Condition: good Category ID: 703 Crjdpfszlnbwox Aptsg Type: Multi-head weigher with pouch filling machine If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Cedpfx Apszc Iztoterg Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Csdszc Izgepfx Apterg

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Crodpfxozc Iypo Aptog Total hight:75mm V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!