Used Nailing Bridge - Worktables for sale (1,365)

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. Fjdpsykqxdjfx Adrspk • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Fpodpodzc Rxjfx Adrsk Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 2,156 h, machine/vehicle number: 676483, USED AICHI truck-mounted bridge inspection vehicle MODEL : SF75A SERIAL : 676483 YEAR : 2002 Fpedpfxozk Uaws Adrsk HOUR : 2156

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Fsdpfxezt A T Dj Adrjpk Machine Benefits Technical Machine Benefits • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 76020, travel distance X-axis: 3,800 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 320 mm, table width: 2,400 mm, table length: 3,800 mm, Breton Genya is the advanced cnc bridge saw for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen tops, vanity tops or claddings. The indicated price does not include disassembly and subsequent installation costs. Fedpfxozrfade Adrepk

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Fsdsyu R Dzepfx Adropk Load capacity: 860 kg + 630 kg (equipped with two cranes) Exact technical dimensions are shown in the pictures. The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: used, Year of construction: 2015, 1 unit of overhead traveling crane / single-girder suspended crane ABUS, 1000 kg capacity Fodpszqbvxofx Adropk with electric chain hoist ABUS GM 4 1000.4-2, 6 supports, self-disassembly feature Color: as shown in the pictures, in accordance with the images and inspection Year of manufacture: 2015 Dimensions L/W/H: 1700x400x260cm Condition: used

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: Delta MACHINERY, We offer this operational DELTA CHA 02 E pallet manufacturing machine, produced in 2002. Manufacturer: DELTA Fsdpfx Adsy H D Dyorspk Model: CHA 02 E Year of manufacture: 2002 Condition: operational / in working order and installed Type: Delta pallet production machine / pallet nailing machine If you have any further questions or require more information, please send us a message or call us.

Condition: used, Single-girder bridge crane with hoist, DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width 50 mm T-beam profile: height 320 x width 300 mm End beam length: 2425 mm (+ buffer pads, 60 mm each) Hoist, DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Load capacity: 5 tons Rope arrangement: 4/1 Fsdpfx Ajzd Urtedrjpk Rope diameter: 8 mm Hook travel: 6 meters Main hoisting speed: 5.0 m/min Fine hoisting speed: 0.83 m/min Classification group: M5 Overall height from top of T-beam to bottom of crane hook: approx. 1100 mm Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Power supply: 400 volts, 50 Hz - Control box suspended on cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Space required for transport (crane bridge only): L x W x H: 4830 x 2540 x 1200 mm Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Condition: used, Double-Girder Overhead Crane, KONE / Konecranes, 25/25 t (max. 30 t),Bridge crane, Used machine Manufacturer: KONE Cranes / Konecranes Drawing No. / Type Specification: HK 0049 - M / HK0049 - E01 Lifting capacity: 25/25 t (maximum tested lifting capacity: 30 t) Span profiles: 14 m Lifting height (travel): 15.5 m Condition: Used, in excellent and continuously maintained condition, ready for immediate operation Special feature: The crane comes with complete factory and periodic service documentation, including manuals. In 2023, it underwent an official Konecranes factory wire rope replacement (fully certified), and it has been upgraded with a modern, integrated Konecranes radio remote control and frequency inverter drive system. Overall dimensions: 14,318 mm (total bridge length) x 4,334 mm (total height) Technical and operating parameters: Fpsdpfx Adezi Ua Iorsk Crane classification (according to FEM): Steel structure: 2 / Machinery: 1 Am Rated lifting speed: 3.2 / 0.5 m/min Trolley travelling speed: 16 / 5 m/min Bridge travelling speed: 20 / 5 m/min Installed motor power (Lifting): 15 / 2.5 kW (30% ED, per hoisting drum) Installed motor power (Trolley): 2x 0.65 / 0.15 kW (40% ED) Installed motor power (Bridge): 2x 1.8 / 0.5 kW (40% ED) Supply voltage: 3x 380V, 50Hz + N Control voltage: 48V, 50 Hz Main fuse: 160 A Crane control: Upgraded Konecranes radio remote control for standard operation, plus an independent backup pendant control festooned along the bridge Power supply: Festoon cable system Environmental fire hazard classification: Class "C" Protection class: IP 55 (motors), IP 54 (control panel) Safety devices: Hoisting drums are equipped with electronic overload protection, limit switches for both bridge and trolley travel.

Condition: new, Year of construction: 2026, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Fpjdpohupkmofx Adrok Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,500 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 2,250 mm, operating pressure: 8 bar, input current: 8 A, warranty duration: 24 months, Machine Condition: New Installation & Service: Available across Europe Training: Operational training included Warranty: Manufacturer's warranty Maximum Pallet Dimensions: 2x 140cm x 140cm Fpodpfxsxlxrms Adrsk Operation: Dual-table system (left and right tables) Versatility: Nails any type of pallet + bases/skids Memory: Storage for up to 900 different pallet designs Usability: Simple and user-friendly operation Control Interface Languages: English, German, Polish, French, Italian, Spanish Automation: Automatic path generation (nailing route) Customization: Custom machine lengths available up to 13 meters

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,800 mm, total height: 2,250 mm, total length: 8,000 mm, overall weight: 1,500 kg, Machine Condition: New Installation & Service: Available across Europe Fpsdpjphmwbofx Adrek Training: Operational training included Warranty: Manufacturer's warranty Maximum Pallet Dimensions: 2x 300cm x 160cm Operation: Dual-table system (left and right tables) Versatility: Nails any type of pallet + bases/skids Memory: Storage for up to 900 different pallet designs Usability: Simple and user-friendly operation Control Interface Languages: English, German, Polish, French, Italian, Spanish Automation: Automatic path generation (nailing route) Customization: Custom machine lengths available up to 13 meters

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Fodpfjyf Rqvjx Adrspk Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm  (in direct exit)Distance between columns: 2500 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 20 - 3.000 rpm (5.000 rpm direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: New HR-510External coolant Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: excellent (used), Year of construction: 1993, wire diameter range: 2,4 - 3,8 mm nail length: 50 - 90 mm Fpjdpod Ez Erefx Adrjk output: 820 nails/min

Condition: good (used), Year of construction: 1976, wire diameter range: a) single wire: 2,2 - 3,8 mm Fjdpfed Im Nuox Adrepk b) double wire: 2,2 - 3,4 mm nail length: 10 - 80 mm output: 300/600 nails/min.

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm Fpedpfx Adokk Exorek nail length: 15 - 80 (100) mm output: 300 St./min.

Condition: used, Mounting Table, T grooved worktable, Welding table, T-slot table,T-slot plate,Used Machine Overall dimensions: 4020 x 1720 x 410 mm Groove dimension : 65x55 mm Fedpfsy A N T Ssx Adrepk

Condition: ready for operation (used), Bridge Crane 5t, Demag Bridge Crane 5t, Crane 5t, Used Machine Manufacturer: Demag Overall dimensions: 10,700 x 3,000 mm Electrical data: 400 V; 50 Hz, total current = 18 Amps Hoisting unit: Demag P35 Load capacity: 5,000 kg / 5t Rope length / lifting height: 8 m Fedpfowd Hhcex Adrspk - Wired remote control - Crane travel motor refurbished - Trolley motor refurbished

Condition: used, Second-hand machine Condition: as new Fpsdpfx Adozk Nkkorok Specifications and technical details to follow

Condition: used, Demonstration unit Condition: as new Contents: Carry case Device Fpodpozk Nk Dsfx Adrjk Charger Charging cable Allen key Safety goggles Plastic cover User manual This device is an unused display model

Condition: used, Demonstration unit Condition: as new Multi-shot anchor nailer for 34° plastic- or paper-bound nails from 40 to 50 mm Contents: Device Allen key Safety goggles Tool oil User manual Fsdpfx Adezk Nkqsrepk This tool is an unused display item

Year of construction: 2011, operating hours: 6,342 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3729, Support track width 3600 mm Support height adjustment 400 mm Cut-off wheel, max. 725 mm (max. cutting depth 255 mm) Motorized support swivel, 0-90° stepless Main motor speed regulation 900-4300 rpm Fodpfx Ajzqu A Sedrspk Camera Extension of bridge travel rails Steel tilting table with hydraulic tilting function, 3500 x 2000 mm Horizontal blade flange (500 mm) Laser Software: GMM CAD / MiniCad / Profile Automation

Year of construction: 2013, condition: excellent (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Special design of the support for maximum cutting precision; Fsdei Akvvspfx Adrepk Water collection tray with built-in water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Mobile Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Fodpfxjyf Rrto Adrepk Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 / 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accessories Guarding: 2 slidings doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features