Used Nimak Nmp 7/100 for sale (43,008)

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. Hnedpfew S Exuox Aiyol This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t Hsdpfx Aiscxxwnsyjnl dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Hjdpfx Aoufi Rxjiyjnl Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: good (used), functionality: fully functional, machine/vehicle number: 940329, type of cooling: water, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 HZ Hjdpfovbgxqjx Aiyjnl Sn 50% ED: 100kVA S max: 318 kVA I20c : 48 kA U20 from 5.8 V to 8.3V in 2 steps Clamp opening: 240mm - 500mm Outl. l: 350mm Fmax: 1100 daN at 6 bar Cooling water 10L/min

Condition: used, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,500 mm, loading space width: 1,140 mm, loading space height: 355 mm, total width: 1,845 mm, total height: 900 mm, A51 GW26N0152553, low-loader trailer by Unsinn, type UT 2512-7-13, open box design, GVW: 750 kg, jockey wheel fitted. Frame: unique, torsion-resistant aluminium chassis for safe handling characteristics. Load securing: 4 recessed, foldable lashing eyes mounted in the side wall for reliable load lashing. Side panels: anodised aluminium hollow profile, fold-down rear, with recessed locks. *Front panel foldable. Loading area: made from multi-layer bonded phenolic plywood, 15 mm, seamless, slip-resistant and waterproof. ...and much more. Errors and prior sale excepted. Hedsyqdnljpfx Aiyonl

Condition: used, maximum load weight: 649 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,100 mm, loading space width: 1,100 mm, loading space height: 650 mm, total width: 1,555 mm, total height: 900 mm, A63. GW26M0140819 Low-loader trailer by Unsinn, type UT 2111-7-13, Gross weight: 750 kg, open box, 100 km/h rating Hodjyqdnfjpfx Aiyjnl Errors and prior sale excepted.

Condition: used, maximum load weight: 660 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 1,125 mm, total width: 1,510 mm, total height: 1,125 mm, A64 GWN01572722 Low-loader trailer Unsinn, type WEB T 2111-7-13, tarpaulin and frame, internal height 125 cm, gross vehicle weight 750 kg, 100 km/h, Vehicle not prepared Hedpfx Aijyqdmzsysnl Errors and prior sale excepted.

Condition: used, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 350 mm, A1 GW2640818, * Unique, torsionally rigid aluminium chassis for safe driving characteristics * 4 recessed, foldable lashing eyes mounted in the side wall for secure load securing Hnodpsym Ihhefx Aiyel * Side walls made of anodised aluminium hollow profiles, rear foldable, with recessed latches * Folding front wall * Loading height 550 mm Errors and prior sale reserved

Condition: used, maximum load weight: 574 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 145 mm, total width: 2,047 mm, total height: 905 mm, A33 GW26N0158435 Lowering motorcycle trailer by Unsinn, model UA 2615-7-13, GVW 750 kg, lowerable, 1x centrally mounted airline rail, 100 km/h. Vehicle not prepared/conditioned. Hodpfjymvalox Aiyenl Errors and prior sale excepted.

Condition: used, functionality: unexamined, Ferwood Code: RU0012070 - Manufacturer Code: DKC11,3-100-7-FW - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 12 kg - Dimensions: 70x46x34 cm - If interested, we offer an overhaul service; please contact us. Hnjdoyz Ul Rjpfx Aiysl

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12931*19911, Year of construction: 2020, This forklift is a returned lease vehicle. The technical data corresponds to the original invoice; the seller assumes no liability for this information. Box-frame chassis Box frame, bolted tanks, mudguards, 2+2 crane lugs – step on the left side, handrail on the left side – external rearview mirrors on the fender, high-mounted, per pair – driver protection roof, steel construction – mudguards front/rear Drive system (diesel engine, transmission, drive/steering axles) – standard engine air filter, 2-stage element, with insert & indicator – wheel nut protection (10–25 t) – ZF automatic transmission 4WG-191-B – Volvo TAD-881-VE (requires ZF-191), 185 kW/1175 Nm/1600 rpm / 7.7 L / 6 cylinders EU Stage V – engine pre-heater 220 V, electric – Turbo II heavy-duty air filter – Kessler drive axle D91 (W = 4600 mm) Load-sensing hydraulic system with pressure and flow control (low energy consumption) Variable displacement piston pumps, return filter (10 µm) – hydraulic functions for lifting, tilting, and spreader, 1 joystick, power steering – pressure accumulator for lift mast 60 bar/2L (shock absorbing) – Hydraulic Long Life Filter (HLL), 12,000 h, 3 µm, change every 4,000 h – hydraulic oil tank pre-heating (I) – additional hydraulic oil cooler Electrical system Hodpoylyi Ijfx Aiysnl 24 V electrical system, monitoring system, CAN-Bus, 7” color display MD4 – LED lights (position/indicator/headlights) & LED work lights (2 on fenders, 2 on mast, 2 rear lights) – additional LED work lights (3000 lumen) on lamp console – qty 4 – Additional LED work lights (3000 lumen) on the boom – qty 2 – additional LED work lights (3000 lumen) on the front fenders – qty 4 – lamp console on the cab roof – reverse alarm – LED beacon (on lamp console) – one (1) 400V/3-phase power outlet for all heaters Electronic machine control (EMC) EMC Master incl. MD4 controller, 7" touch color display (A) – EMC 106 complete monitoring (engine, transmission, hydraulics, levers/joystick & service) – EMC 114 electronic joystick with RPM ramp-up – EMC 123 ECO drive module (fuel functions & settings) – EMC 124 driver login (up to 20 logins) – EMC 125 data logging module (alarm+error) – EMC 129 hour meter – EMC 122 maximum speed (specified 20 km/h) OPTIMA – Driver's Cabin Cabin Optima (L x W x H = 1605 x 1480 x 1620 mm) – solid cab, 1 joystick, ventilation, 3 wipers – opening window (right+left), interior rearview mirror (right) – Electrical 24V / 10A / 12.5mm socket / front right – coat hooks (2x) on rear wall of cabin (left and right) – additional trainer seat, 2-point belt, left side – driver seat Isringhausen ISRI 6830KA/870 (air suspension, heating, ventilation, 3-point belt) – DAB/analog radio with Bluetooth, MP3, AUX, USB, 2 speakers – variable wipers front/roof/rear window – ACC air conditioning – electrical 24V / 10A / 12.5mm socket / cab roof right – electrical 12V / 10A / 21.4mm socket / front right – electric cab heater including power socket – long sun visors (roof and front window) – additional rearview mirror (left side) –

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/020 -Length: 7.0 m Hnjdsx Einpjpfx Aiyel -Transport dimensions: Ø 560 x 170 mm -Weight: 10 kg

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch Hodpfx Aex Eipvoiysnl -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. Hnedpfx Aisx Eifkeyel The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: used, Year of construction: 2023, Grindel for frame height 80 Hydr. working depth adjustment STW 35 plough body, / 1 pair 430 coulter blade, 1 pair HD coulter point, 1 pair insert plate for STW 35, 1 / pair disc coulter holder D 500 serrated and spring-loaded Preparation / for ploughing Hnjdpfx Aijrxtbieyel

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, load capacity: 6,000 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet Racking System 4 m high, each bay with 2 beam levels (clear width 2700 mm) Scope of supply: 32 frames, 4 m high 128 floor anchors 18 corner impact protectors 100 beams, 2.7 m long, 0.11 m high 150 mesh decks 89/110, load capacity 1000 kg 7 load capacity signs Delivery: free to site Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / assembly location - Unloading from the truck is carried out by the customer using their own lifting equipment Hnsdpfxsy E Nn Us Aiyjl - Delivery to anywhere in Germany except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), For sale: Professional milling toolholder by ORION – high German manufacturing quality. • Type SK40 Ø6-100 • DIN 69871 AD standard – central cooling • Collet for Ø6 mm • Length 100 mm • Includes tool (milling cutter / drill bit) • Very good used condition, fully functional ORION toolholders are a reliable choice for CNC machining centers and milling machines with SK40 taper. PRICE IS FOR 1 PIECE. Hnedpjxcgxvsfx Aiyol

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Hsdpsxcgytefx Aiysnl

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Hsdpfexcgygsx Aiyenl

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm Hodpou Nv Eaofx Aiyjnl control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: used, Tank capacity (litres) Hnedovpfhyepfx Aiyol 100 Motorized pumps Up to 2 external each tank Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Condition: good (used), Technical Data for Pallet Rack Beam: Racking system: Polypal Type: Stockpal Scope of delivery includes: 01x Pallet rack beam, used Material color: orange Box profile: 100 x 50 mm Type: SKVBN 09850NP33 Connector: 3 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 1,600 kg (with evenly distributed load) 02x Safety pins, used Version: fully galvanized For securing the longitudinal beams Prevents unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Hedpoxz Aphjfx Aiyonl Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should you require transport or shipping, additional costs will apply, which can be quoted individually depending on delivery location and scope.

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: Polypal Type: Stockpal Scope of delivery includes: 01x Pallet rack beam, used Design: Top beam Material color: orange Box profile: 100 x 50 mm Type: SKVBN 09850NP22 Connector: 2 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load Hsdjxzyi Sopfx Aiyonl 02x Safety pins, used Version: Fully galvanized For securing the longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping of this item is required, this will incur additional costs, which can be requested from us depending on the delivery location and scope.

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: Dexion Type: P 90 Included in delivery: 1x pallet rack crossbeam, used Material color: Sendzimir galvanized Box profile: 100 x 50 mm Crossbeam type: SLB 100|15 Clamp: 5 HK Clear width: 2,700 mm Max. load per pair of crossbeams: 2,700 kg, with evenly distributed load 2x locking pins, used Version: Sendzimir galvanized For securing the longitudinal beams Your contact person in our company: Mr.: Andre Evening Mr.: Mario Klöver Mr.: Falk Deutsch Hodpewhwt Rsfx Aiyjnl General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 2009, Arburg 370S 700-100/100 / 2K machine / operating hours: 33.544 in automatic mode / very good technical condition Year of manufacture: 2009 injection unit: Screw diameter: 30 mm injection weight: 65 g Injection pressure: 1390 bar Metering volume: 71 ccm Clamping unit: clamping force: 70 t tie bar distance: 370x370 mm size of clamping platens: 510x510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: 2K machine Operating hours: 33.544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Machine with the built-in conveyor belt Arburg and original sorting flap There is a possibility to buy an original Weber turntable It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer Dimensions: Weight: 4440 kg Length/width/height: 3.48x1.58x2.97 m Drive: Pumps/motor: 15 kW Heating power: 4,9 kW Hjdjy Smtuopfx Aiyjnl Total power: 19,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request