Used Novumpack Induction Welder for sale (872)

Year of construction: 2021, condition: used, GH INDUCTION | EMMEDI HF welder 100kW In excellent working conditions. Year 2021. Solid-state high-frequency induction heating generator 100Kw for tube welding applications · Welding frequency: 400 KHz · Power: 120 KVA · Modules: SiC SiliconCarbide IGBT Scope of supply · Power cabinet with digital control (MPC-3 HMI touchscreen interface) · Oscillator module · XYZ motorized inductor positioning system · Operator control desk with diagnostic display, manual/automatic modes · Cooling system with air–water heat exchanger Nlsdpjzkf Thefx Ab Ueg Welding frequency: 400 KHz Power: 120 KVA Modules: SiC SiliconCarbide IGBT

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3286502, overall weight: 5 kg, input voltage: 230 V, The DGYF 500C induction sealer is used for induction-electromagnetic sealing of aluminum caps under bottle caps. Key features: • Suitable for use with plastic or glass containers. • Very easy to operate. • Handheld device for small-scale applications. • Easy to transport; requires no dedicated workspace. • Packing speed of approximately 20-40 units/minute (depending on the operator and the product being sealed). • Maximum container diameter: 60-130 mm. Nlsdpoy S Rxhjfx Ab Ueg • Maximum distance between the inductor and the container: 3 mm. • Activated by a switch on top of the inductor. Control panel: • On/Off switch. • Fuse. • Digital display indicating current intensity. • Digital display indicating time. • Overheat protection – the device automatically shuts down until it cools down. The induction sealer comes with sealing foil, 85 mm in diameter, 2 packs of approximately 400 pieces each.

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 Nljdpfsupia Nox Ab Usg W27 x 178 (USA) Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Nodpfx Aezc Uu Hsb Uolg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Nlsdpfx Aow Hwp Nsb Ujg

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Output data: Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Nlodpjvw S Rwefx Ab Usg Protection class (IP): IP54

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with a series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, easy operation, and high efficiency) Nlodszdp H Sepfx Ab Ujg in a series resonant circuit and a compact design, with cooling integrated into the generator cabinet. Rittal generator cabinet and GH Induction TC150/2 resonant circuit Voltage 400V, Frequency 50 Hz, Current 56 A, Power 37.5 kVA In like-new condition! Scope of supply: Transistor generator, Rittal generator cabinet with cooling, and TC150/2 resonant circuit (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2021, operating hours: 240 h, functionality: fully functional, operating pressure: 6 bar, We used the machine for PVC tarpaulins. The company is closing down. Technical details can be found in the photo. It has been running without issues, and no maintenance has been required to date, although this can certainly be clarified with the manufacturer in Italy. The machine functions perfectly; there is no overheating. A video call is possible. Three electrodes are included: one fixed electrode, 100 cm x 20 cm one fixed electrode, 50 cm x 2 cm one flexible electrode, 100 cm x 2 cm 400 L/minute Nlodpfxezy E D Eo Ab Ujg 200/300 L of air Working pressure: 6 bar, max. 8 bar.

Condition: new, Year of construction: 2020, functionality: fully functional, Manufacturer BRINOX Model LEP 12 – CIP System Precipitation PRE LEP 12 CS6721 Package 3 Year of manufacture 2020 Condition New, original packaging, unused. Nsdpfx Absyl H H Ts Uslg The system was tested exclusively at the factory as part of FAT. No commissioning, no production, no media contact during operation. Description Modular CIP process system for pharmaceutical applications in hygienic stainless steel design. Compact skid-mounted unit with fully integrated measuring, pump, and valve technology. Dimensions approx. 1520 x 970 x 1994 mm Materials Product-contact parts: Stainless steel 1.4435 Frame/Structure: 1.4301 Welding as per EN ISO 13920 Features – Shell-and-tube heat exchanger – Hygienic centrifugal pump – Magnetic-inductive flow meter – Conductivity measurement – Pressure transmitter – Temperature measurement points – Pneumatic seat and diaphragm valves – Stainless steel frame construction – CIP supply / CIP return – Media connections for NaOH, acetic acid, steam, condensate, wastewater Testing Comprehensive FAT performed including: – Layout check – P&ID review – Accessibility check for maintenance and calibration – Documentation review – Surface roughness test – Sensor calibration – Welding documentation review – Leak test with compressed air – passed Calibration certificates available. Material certificates 3.1 available. Complete welding documentation (WPS, WPQR, welder certificates, NDT evidence). CE-compliant execution. Scope of delivery Complete pre-assembled process module including documentation. FAT reports, welding records, material certificates, calibration certificates fully included.

Year of construction: 2019, condition: ready for operation (used), Connected load: 84kVA, length: 5065mm, width: 1100mm, height: 1530mm. Njdpeg A Trgsfx Ab Uolg

Condition: ready for operation (used), A good used induction heat sealer model ICS 1H from Relco UK - ideal for low speed semi-automatic or manual line with diaphragm in cap for sealing onto container. Nledpfxjua E Rqj Ab Uog

Condition: used, Year of construction: 2010, machine/vehicle number: 1008801, The machine is designed for electro-resistance spot welding of gabion mesh panels. It can also be used for welding a new type of mesh; in this case, the welding points are reprogrammed. Wire diameter: 3-6mm Maximum mesh dimensions: approx. 2x2 m Operation of the welding machine is semi-automated. Wires are manually inserted on one side of the machine. After automatic welding, the finished mesh is manually removed, and new wires are inserted. Power supply: 400 V AC Machine dimensions: approx. 10.5 x 3 m Location: In our workshop Nsdpfxezy Eq Ss Ab Ujlg

Year of construction: 2019, operating hours: 50 h, condition: used, functionality: limited functionality, heating capacity: 50 kW (67.98 HP), The system is designed for the automatic induction hardening of screws and bolts in sizes M8 and M10. Manufactured by Grimm Zuführtechnik, the system is capable of processing approximately 70-80 parts per minute (depending on the component) and offers various monitoring features (temperatures, component heights, component types, rotation monitoring, etc.). Parts are conveyed from a bunker belt via a steep conveyor to a linear sorter, from where they are precisely positioned and transferred into an 8-position indexing table, with two nests per station. A 50kW high-frequency generator from IDEA is connected, featuring additional monitoring functions (energy output, earth fault detection, inductor water flow and temperature monitoring, etc.). The system includes its own quench water tank, from which the parts are discharged using a magnetic conveyor belt. The parts are then demagnetized. Nodpsxlii Ajfx Ab Uslg Quench medium filtration is handled via a cartridge filter. Both the system and the generator are prepared for connection to a central cooling system. Due to the currently unconnected cooling, the system is only partially operational; however, it can be inspected by interested buyers. The system was built in 2019 and, unfortunately, has never been run continuously due to the impact of the Covid-19 pandemic and associated order cancellations. As a result, it is in like-new condition. Should you require additional photos, we also welcome you to visit and inspect the system on site.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. Nledpfx Absz D Hyyj Usg With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 13276/1694, type of input current: three-phase, total height: 2,500 mm, total width: 3,000 mm, total length: 5,000 mm, input voltage: 380 V, control voltage: 24 V, input current: 250 A, input frequency: 50 Hz, Equipment: documentation/manual, Inductotherm 150 kW induction furnace; comes with 3 new crucibles. Aluminum capacity: 60 kg, melting time: 30 min. Bronze capacity: 200 kg, melting time: 60 min. Nlsdpfx Aezfif Reb Usg

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A - Overhang 670mm - Upper roller diameter 175mm - Lower roller diameter 120mm - Arm distance 350mm - Electrode force 500daN - Stroke approx. 30mm - TE500 control unit with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function, Nljdpfx Abezh Izcs Ujg Language selection: German, English, Italian, French, etc., with operating manual - 2-stage foot switch according to UVV standards - Machine main switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with circuit diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an extra cost. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed according to actual effort.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 27.15.494, functionality: fully functional, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, overall weight: 100 kg, Equipment: CE marking, 5M Tandem furnace (inductional) Nedpfx Abezqclhj Ujlg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Offered for sale is a Komet ISG3100 shrink fitting machine for the precise and rapid shrinking of tools in shrink chucks. The device is ideally suited for use in CNC machining, toolmaking, mold making, and modern cutting processes. Thanks to the induction technology, tools can be quickly and reliably shrunk in and out. The compact design and ease of operation make the device an efficient solution for daily tool preparation. Features: Manufacturer: Komet Nlsdezu Ikkjpfx Ab Ueg Type: ISG3100 Induction shrink fitting technology Fast heating of shrink chucks Simple and safe operation Suitable for various tool holders Compact and robust industrial design Ideal for CNC machining and tool management Advantages: High concentricity accuracy of the tool holders Fast tool changes Reliable tool clamping Reduction of setup times Long service life of the tool holders Suitable for series production and single-part production with various holders from HSK30 to HSK100 Used, fully functional. Shows signs of wear consistent with its age.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Medium-frequency spot welding machine – also suitable for welding aluminium. Rated power at 20% duty cycle: 180 kVA Nedpfx Aozz Ripeb Uelg Max. welding power: 315 kVA Adjustable reach: 300 to 800 mm Arm spacing (min/max): 150–400 mm Electrode stroke: parallel stroke Electrode force adjustable up to 600 daN Weight: approx. 660 kg Welding control unit: Dalex L 4-6 Cooling water flow rate: 10 l/min Operating instructions and manual are available Working stroke triggered by pneumatic foot pedal Very good, well-maintained condition

Year of construction: 2016, condition: used, THERMATOOL CFI 200 HF Welder for tube production, 200 kW solid-state high frequency welding system, manufactured in 2016. THERMATOOL CFI 200 HF Welder, designed for reliable high-frequency welding applications with advanced automatic load matching AUTOMATCH and THERMAVIEW remote control. With interconnecting cables, it is ready for re-installation. In excellent worling conditions. TECHNICAL SPECIFICATIONS - Manufacturer: THERMATOOL - Model: CFI 200 - Year: 2016 - Continuous Output Power: 5 - 200 kW - Nominal Welding Frequency: 400 kHz - Total System Power: 307 kVA - Input Voltage: 400 V - Input Frequency: 50 Hz - Input Current: 464 A - Control Voltage: 110 V SCOPE OF SUPPLY HF CABINET - Compact Rugged Enclosure Design - Water Cooled High Frequency Power Transistor Modules - High Frequency Capacitor Bank - Single Axis Table. - Water Flow and Temperature Protection - ‘Automatch’ - Automatic load matching system - Output Weld Lead Assembly DC CABINET Power Supply - SCR Power Controller/Stabiliser - Solid State Low Ripple Filter - Automatic Speed Power Control - Heavy Duty Power Transformer THERMAVIEW Remote Control Console - PC Panel with Thermaview software - Power Control - Pushbuttons and Control Switches - Analog Indication Meters OUTPUT BUSBAR - Straight output busbar CABLES / PIPING - Existing interconnecting cables - Existing distilled water interconnecting piping WORKCOILS - 5 workcoils in the range 25 – 76.2mm BENEFITS ✓ Solid-state technology for reliable operation ✓ Automatic load matching to optimize welding performance ✓ Integrated THERMAVIEW control for convenient operation and monitoring ✓ Suitable for a wide range of tube diameters with five included work coils ✓ Designed for efficient production and dependable welding performance Nsdpjzi Twrefx Ab Uolg For more information, contact Continuous Output Power: 5 - 200 kW Nominal Welding Frequency: 400 kHz Total System Power: 307 kVA Input Voltage: 400 V Input Frequency: 50 Hz Input Current: 464 A Control Voltage: 110 V

Condition: like new (used), functionality: fully functional, overall weight: 130 kg, USED WELDER INVERTER MULTIPROCESS 520A, MIG/MAG-TIG-MMA, CEBORA KINGSTAR 520 TS. Nlsdpfezxwy Nsx Ab Uog

Condition: used, Year of construction: 2017, functionality: unexamined, R+P Stud Welding Cell Enclosed protective cell made of aluminum profiles Safety enclosure with protective doors Signal light Integrated control cabinet Nledpfjzvylpsx Ab Uog Documentation available Suitable for automated stud welding processes Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Serial number: 1739289 Part No.: 80-07-57 Technical data: Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Both units were last used together as an automatic stud welding system.

Condition: excellent (used), Year of construction: 2015, input voltage: 400 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, For sale: an industrial induction melting and holding unit, model IH-40-HNK, manufactured by INDUCTOR Kft. The unit was manufactured in 2015 and features a water-cooled, medium-frequency induction system. Technical Specifications Manufacturer: INDUCTOR Kft. Model: IH-40-HNK Year of manufacture: 2015 Power output: 40 kW Supply voltage: 3 × 400 V / 50 Hz Rated current draw: 70 A Water-cooled inductor Stainless steel, insulated melting vessel Estimated vessel capacity: approx. 200 liters Modern medium-frequency IGBT power electronics PLC/HMI control system Control cabinet weight: 190 kg Applications Aluminum melting Aluminum holding Foundry operations Metal processing plants Nlodpfx Aszy Ng Rob Uog

Condition: ready for operation (used), functionality: fully functional, USED PULSED INVERTER WIRE WELDER, 400 Amps, MIGATRONIC BDH 400, refurbished like new. Nodpfx Abjzxwzyj Uelg

Year of construction: 2011, condition: used, THERMATOOL CFI 250 Solid State HF Welder 250 kW High frequency tube welding machine This THERMATOOL CFI 250 is a Solid State High Frequency Welder designed for the production of steel tubes and profiles using high-frequency welding technology. With an output power of 250 kW and a 400 kHz welding frequency, it delivers reliable, efficient, and high-quality welding performance for tube mill production lines. Technical Specifications · Manufacturer: THERMATOOL · Model: CFI 250 · Year: 2011 · Output Power: 250 kW · Welding frequency: 400 kHz · Input Voltage: 3 × 400 V · Input Current: 578 A Main Features · 250 kW MosFet HF inverter with 5 pairs of modules (5 positive & 5 negative) · AUTOMATCH automatic load matching system · 250Kw DC rectifier with PLC control Siemens S7 · Remote control console · Closed-loop distilled water cooling system Looking for a used THERMATOOL HF welder, 250 kW solid-state welder, or other second-hand tube mill equipment? Explore our extensive range of quality used machinery for the steel tube industry. Input Voltage: 3 × 400 V Nsdpezpx Iiofx Ab Uslg Input Current: 578 A Welding frequency: 400 kHz Output Power: 250 kW 250Kw MosFet HF Inverter with 5 pairs of modules: 5 positive & 5 negative 250Kw DC rectifier: with PLC control Siemens S7