Used Oerlikon Oxytome 30 for sale (24,533)

Year of construction: 2008, condition: ready for operation (used), A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible. Iodpfxjw U T Upo Ak Aoif

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Ijdpfjzulh Tex Ak Aoif Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control Siemens 840D Isdpfsy D T Susx Ak Aeif weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Iedpjv I U Hcefx Ak Asif Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, wheel diameter: 400 mm, overall weight: 4,000 kg, distance between centers: 550 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens 840 D, TECHNICAL DETAILS Max. wheel diameter: 400 mm Workpiece diameter: 36–400 mm Centre distance: 135–290 mm Max. spindle speeds (infinitely variable): 3,000 rpm Centre width: 100–550 mm MACHINE DETAILS Control: CNC Siemens 840 D Dimensions & Weight Isdpfjywg Hxex Ak Asif Space requirement: approx. 2,000 x 3,055 x 2,788 mm Machine weight: approx. 4,000 kg EQUIPMENT Single-flank rolling test Double-flank rolling test Structure-borne noise testing Helical contact testing (double-flank contact) Use of up to 6 test carriages Highest test accuracy and repeatability Machine table with workpiece drive Swivelling pneumatic unit Spray lubrication (Type: Vogel) Oil mist extraction (Type: Elbaron)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is an Oerlikon Nonwoven ecuTEC+ electrostatic charging machine, designed for the electrostatic charging of filter media. The machine is intended for integration into a production line and processes material webs with a width of up to 1,700 mm. The material is guided through the machine by a system of deflection rollers and electrostatically charged using charging bars. The system is equipped with an HMI control panel and can operate in constant-current or constant-voltage mode. The machine has seen very little use and is being offered due to changes in the production setup. Manufacturer: Oerlikon Nonwoven / Oerlikon Neumag Model: ecuTEC+ Year: 2020 Application: electrostatic charging of filter media Iiodpfxezumirs Ak Aef Maximum material width: 1,700 mm HMI operator panel Adjustable charging system Constant-current / constant-voltage operating modes Designed for integration into an industrial production line CE documentation available According to the manufacturer's documentation, the material is guided through the machine via seven deflection rollers and electrostatic charging takes place at four charging positions. The system includes the machine frame with safety guarding, deflection roller/charging section, electrical cabinets with control electronics and high-voltage generators, and touchscreen control panel. Condition: Used, very low operating use. The machine is currently dismantled/disconnected from the production line. Detailed technical documentation is available. A comprehensive PDF specification/manual can be provided to interested buyers upon request. Inspection can be arranged by appointment. Further information, photos and documentation are available on request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 58,782 h, controller model: Siemens Sinumerik 840D, laser power: 3,200 W, working length: 3,000 mm, working width: 1,500 mm, pallet changer: automatic, No minimum price – guaranteed sale to the highest bidder! The machine must be dismantled in week 35. However, collection is possible in weeks 36 and 37. TECHNICAL DETAILS Laser type: CO₂ laser Laser power: 3.2 kW Working length: 3,000 mm Working width: 1,500 mm MACHINE DETAILS Ijdezrfqiopfx Ak Ajif Control model: Siemens Sinumerik 840D Laser hours (laser on): 107,255 h Laser hours (beam on): 58,782 h EQUIPMENT Automatic pallet changer

Condition: like new (used), Rotary vane bacuum pump in oil bath. Available in stock. Isdjftzzgopfx Ak Aoif Completely overhauled pump. With warranty. Nominal flow: 300 m3 / h at 50Hz. Final vacuum: 0,1 mbar abs. Any clarification, do not hesitate to contact us.

Condition: refurbished (used), Oerlikon Leybold Vacuum ScrewLine SP630 refurbished Iisdpfex Hh Agsx Ak Aef

Condition: used, Year of construction: 1941, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 860 mm, turning length: 2,500 mm, center height: 400 mm, workpiece weight (max.): 10,000 kg, spindle bore: 57 mm, total length: 5,100 mm, total width: 1,860 mm, rotational speed (min.): 6 rpm, rotational speed (max.): 250 rpm, Equipment: documentation/manual, For sale: Oerlikon DM4S conventional lathe, manufactured in 1941. Dimensions: Estimated weight: 10 tons Center height: 400 mm Footprint: 1860x5100 mm Distance between centers: 2500 mm Spindle bore: 57 mm Options: Multi-fix turrets 4-jaw chuck/faceplate Ø1050 mm Rapid traverse Many accessories… Inspection and testing possible at 1822 Chernex, Switzerland. Iisdpfoy Tapljx Ak Aef Price: €10,000 (negotiable) Travel and transport costs are the responsibility of the buyer. More photos and videos are available upon request. Please contact me for further information.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, spindle speed (min.): 10,000 rpm, spindle speed (max.): 60,000 rpm, Equipment: rotational speed infinitely variable, Overbeck overhauled in 2015 and equipped with fast frequency spindle SC3060-V1000, frequency converter SD2T 3.8kVA and cooling unit PHK525 HZ, cooling capacity 550W Iiedpfxeu Aqt Eo Ak Asf

Condition: good (used), Year of construction: 2004, operating hours: 16,651 h, functionality: fully functional, machine/vehicle number: M342-06204054DFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, feed length X-axis: 760 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 18 kVA, torque: 236 Nm, controller manufacturer: Hurco, controller model: Ultimax 4, workpiece length (max.): 1,020 mm, workpiece width (max.): 510 mm, workpiece height (max.): 610 mm, workpiece weight (max.): 750 kg, total height: 2,700 mm, total length: 280 mm, total width: 2,300 mm, table width: 510 mm, table height: 850 mm, table length: 1,020 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 6 bar, spindle nose: Steilkegel Gr. 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Excellent condition: Hurco VMX 30 with extremely low operating hours! For sale is a very well-maintained, vertical 3-axis machining center, a Hurco VMX 30, manufactured in 2004. The machine is in exceptionally good condition for its age. As can be easily seen from the operating hours, the machine has only been used very little by us. It was used exclusively for light-duty operation/toolmaking and was not subjected to heavy series production. The mechanical components (guideways, ball screws, and spindle) are correspondingly only slightly worn and offer high precision. The machine is equipped with the popular Ultimax 4 dual-screen control system, which is highly regarded worldwide for its extremely fast and easy dialog programming directly on the machine. Iijdpszudd Tofx Ak Aef

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times Iiedjzubtlspfx Ak Aef • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Iijdpfxouanq To Ak Ajf

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: Isdpeziciwsfx Ak Aeif The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Iiodpfx Asy Uyf Nsk Aof

Condition: used, Year of construction: 1983, functionality: limited functionality, feed length X-axis: 1,700 mm, feed length Y-axis: 650 mm, feed length Z-axis: 700 mm, table width: 570 mm, table length: 2,000 mm, Oerlikon FM 3 CNC milling machine Heidenhain TNC 320 Most recently used for milling weld bevels Tool holder SK 50 Ijdpfx Aeyp Dxuok Asif Powered on, test operation possible Loading with overhead crane possible

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Iodpfoy U Nqnex Ak Asif

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Ijdpszi Uq Hefx Ak Ajif Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: W000257776, type of input current: three-phase, type of cooling: water, welding current (min.): 20 A, welding current (max.): 400 A, Oerlikon Citopuls MXW 420 MIG/MAG welding machine with water cooling – 400 A For sale is a used Oerlikon Citopuls MXW 420 MIG/MAG welding machine from the production stock of Syntegon Technology GmbH. The machine was used in its own production and is being sold due to a production and inventory consolidation, as it is no longer needed. The machine is functional and has been regularly inspected. The annual safety inspection certificate is available. This powerful industrial machine is particularly suitable for demanding MIG/MAG welding applications in the fields of mechanical engineering, metal construction, maintenance, and manufacturing. The water cooling ensures reliable operation even at higher welding currents. Iiodszlrwcjpfx Ak Aof Technical data: Manufacturer: Oerlikon Model: Citopuls MXW 420 Year of manufacture: 2007 Serial number: W000257776 Welding current range: 20 – 400 A Power connection: 400 V Welding process: MIG/MAG [Machines_...likon 2134 | Excel] Water cooling with existing water cooler Welding torch included Condition: Functional Safety inspected Used, from ongoing production The machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair companies looking for a reliable industrial welding machine. Inspection possible by prior appointment. Loading upon agreement. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Disassembly, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Max. machining diameter: 2,800 mm Min. machining diameter: 1,400 mm Max. machining height: 600 mm Max. workpiece weight: 5,000 kg Rotational speed of the chuck: 21–68 /min. Iodpozu Itrjfx Ak Aeif

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Here are the most important technical data and features at a glance: Technical Data Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Iijdpfxozdqdlo Ak Ajf Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Distance spindle - table min. 132 mm / max. 724 mm Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 10056 196, number of rollers: 3, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 34,000 kg, Haeusler hydraulic roller, type RMA 2500/30. Ijdpfx Akszutixo Aeif Machine in good working condition. Capacity: 30 mm steel x 2500 mm.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 250 mm, rotor length: 600 mm, power: 30 kW (40.79 HP), Pre-shredder: 1 unit Forrec AE 600/30 single-shaft shredder: - Drive: 30 kW Ijdpfx Akoztaurs Aoif - Dimensions: 2,250 x 3,050 x 1,600 mm - Rotor diameter: ø 250 mm - Hopper dimensions: 1100 x 1000 mm - Hopper capacity: 750 liters - Production: 600 kg/hour (mixed cables) - Weight: 1,750 kg - 1 set of original Forrec spare parts Accessories: - Electric lift table for material feeding - Conveyor belt for shredded material discharge - Metal platform for material feeding The machine has been disassembled and is in storage. Therefore, a functional test is not possible. Pickup only in 14727 Premnitz.

Condition: like new (used), Year of construction: 2023, operating hours: 40 h, functionality: fully functional, type of input current: three-phase, type of cooling: air, Reliable conveyor dryer built for curing plastisol and water-based inks on screen-printed garments and textiles. The Econored III 30 combines infrared heating elements with a 30-inch belt width, offering efficient, even heat distribution for consistent, professional-quality curing results. Key Features: 30" (76 cm) belt width, suitable for small to mid-volume production runs Infrared heating technology for fast, energy-efficient curing Adjustable belt speed and temperature controls for precise curing across different ink types and fabrics Isdsztx T Hjpfx Ak Aeif Digital temperature control panel for accurate, repeatable settings Sturdy frame construction for stable, long-term operation Compact footprint, well suited for shops with limited floor space Reduced energy consumption compared to older conventional dryer models Ideal for: Screen printing shops, apparel decorators, and textile businesses looking for a dependable mid-size tunnel dryer to boost throughput and ensure consistent ink curing. Well-maintained unit, ready for immediate use in production.