Used Omera Umform Beschneide Maschine R1000 for sale (1,519)

Condition: used, Year of construction: 2001, OMERA DIAMETER: 1200 mm Dedpfx Adsy Rx Eyjrswa

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, Number of connecting rods: 2 Bed size (x-y/mm): 2700 x 1350 Stroke (mm): 400 Slide adjustment (mm): 150 Type of strokes: adjustable Dedpfxezqgzye Adrewa Strokes per minute: 10 - 25 Year of manufacture: 1980 Machine condition: overhauled Poland

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, pressing force: 80 t, stroke length: 400 mm, table width: 750 mm, table length: 600 mm, Omera hydraulic press model OPI-80C Capacity 80 tons Table 700x600 mm Dsdey Sz I Hjpfx Adrowa Stroke 400 mm

Condition: ready for operation (used), For sale is a drainage machine that is immediately ready for use. It can reach a depth of up to approximately 2 meters. The undercarriage still has at least 80% of its original capacity. It is pre-equipped for a Moba laser control system, but the system itself is not included. The machine is being sold due to the purchase of a new one. There are no technical defects. Dedszkvd Depfx Adrswa

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Dodekvnumspfx Adrewa Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dwedskvnuuopfx Adroa Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: ready for operation (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm - Fine chippings 2-4mm - Chippings 4-8mm - Premix chippings/sand - Play sand 0-2mm - Washed sand 0-4mm Djdpfxsvw Urws Adrjwa - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Condition: used, We offer a board stacking machine. Dwedpfx Asyh U I Ijdrja The stacker features a separating device and a powered roller table for pre-made packaging. More than half the width is in like-new condition, as only 120 cm wide boards have been stacked. Machine width: 4.30 m Machine length: 7.50 m The entire system corresponds to the foto

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TYPE 63 R4, functionality: fully functional, operating hours: 100 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 63 t, overall weight: 4,600 kg, Equipment: documentation/manual, EECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Power supply: 380 V / 50 Hz / 3 Ph Dsdsyn Sdpspfx Adrswa Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR

Condition: new, Self-priming eccentric screw pump mounted on a running gear incl. 2/3 hose screw connection with locknut MG90/65 nozzle VA and 2/3 hose screw connection with locknut DN65/65 nozzle VA. Specifications: capacity 4 020 / 8 160 l/h power: stage 1 1,0 (1,36) kW (PS) stage 2 1,9 (2,6) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 270 mm width 500 mm height 810 mm weight 57 kg material 1.4301 / AISI 304 Dwjdpfxjb Nvb Dj Adrea connections: in the front MG90 AG on the top DN65 AG suitable for mash

Condition: used, Year of construction: 2009, functionality: fully functional, Kalmijer KGM biscuit machine with 2 biscuit rollers: Spekulatius and Kipfel. Comes with 10 baking trays. The machine has been overhauled. Stainless steel frame on castors. Equipped with heating for the rollers. Tray width: 25 cm; tray lengths: 1 m, 80 cm, and 60 cm. 16A connection. If you have any further questions, please contact us. Thank you in advance! Dsdjw T Rxcopfx Adrowa

Condition: ready for operation (used), Motorized tool holder SK40 / SK50 from Zoller machine 6084 / H4000, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dwodpfx Asztmkgjdrea

Condition: new, Year of construction: 2026, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. Dodpfjtu H Tuox Adrswa The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: used, Year of construction: 2012, Air cushion machine, Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or Polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on the film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Djdpewulylofx Adrjwa Weight: 230 kg Accessories / special equipment: • Stored programs for different cushion sizes • Program change is activated by pressing a button • Cushions from 4 cm to 16 cm in length can be produced individually with a defined filling level • 10 programs are available for storing multiple parameters 22726ä

Condition: ready for operation (used), Tool spindle for Hedelius BC 40D machine, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Dwsdpeznq Sdjfx Adrea

Condition: excellent (used), functionality: fully functional, power: 2.8 kW (3.81 HP), fuel type: gasoline, color: white, operation weight: 58 kg, Year of construction: 2024, operating hours: 13 h, Dynapac DR6X Tamper – Demo Machine Dynapac DR6X Tamper – Demo Machine | Year of Manufacture: 2024 | Approx. 13 operating hours | Tamper foot width: 230 mm | Honda GXR 120 gasoline engine with 2.8 kW | Identical design to Bomag BT 60 Technical Data: Manufacturer: Dynapac Model: DR6X Condition: Demo Machine Year of Manufacture: 2024 Operating Hours: approx. 13 h Operating Weight: 58 kg Tamper Foot Width: 230 mm Engine: Honda GXR 120 gasoline engine Engine Power: 2.8 kW Fuel: Gasoline Starting System: Reversible start Highlights & Features: - Like-new demo machine with very low operating hours - Identical design to Bomag BT 60 - Powerful tamper for precise compaction work - Reliable Honda GXR 120 engine – robust & durable - 230 mm tamper foot width – ideal for narrow trenches & pipeline construction - Compact design – lightweight & easy to maneuver Dwsdpfx Adezrc Uforja - Proven Dynapac quality – ready for immediate use Application Areas: ✓ Cable & pipeline construction ✓ Compaction in trenches & narrow areas ✓ Garden & landscaping ✓ Municipal applications & construction companies ✓ Fiber optic & network construction Location: Warehouse D 46514 Schermbeck (North Rhine-Westphalia) – Inspection & collection possible Delivery throughout Germany & internationally upon request Price ex warehouse Maassenstraße 91, D 46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other brands available! Also Wacker Neuson, Bomag, Weber, etc. in stock ➡️ New & used machines, accessories & spare parts Buy Dynapac Tamper | DR6X Demo Machine | Year of Manufacture 2024 | Gasoline Tamper 15 kN | Honda GXR 120 | 230 mm Tamper Foot | Dynapac Compaction Technology | Identical design to Bomag BT 60 Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure the immediately available demo machine! If required, we will be happy to offer you a virtual inspection of the machine via video call.

Condition: like new (used), - Two feed speeds - Pneumatic pressure on the feed roller - Maximum cutting width: 210 mm - Main motor power: 13 kW Dodpfxjvzyg Uj Adrswa - Maximum cutting height: 500 mm - Year of production: 2001 - Safety pull cord

Condition: used, Year of construction: 2017, operating hours: 3,379 h, Equipment: all wheel drive, Magni RTH 5.18 Smart rotating telescopic handler, manufactured in 2017, with remote control! ----* Manufacturer: Magni * Type: RTH 5.18 Smart * Year of manufacture: 2017 Djdpfezf T T Sox Adrswa * Operating hours: approx. 3,379 * Last service at approx. 3,355 operating hours! * Includes pallet fork * Includes remote control (wireless!) * Lifting capacity: 5,000 KG * Lifting height: approx. 18 meters * German machine, 1st owner * Good condition! * 100 KW * Deutz diesel engine * CE declaration & exemption permit available * Video available on request * Price: 64,900 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee; errors and prior sale are reserved.

Condition: used, Year of construction: 2017, operating hours: 3,379 h, load capacity: 5,000 kg, lifting height: 18,000 mm, fuel type: diesel, Equipment: cabin, Magni RTH 5.18 Smart rotating telescopic handler, manufactured in 2017, with radio remote control! ----* Manufacturer: Magni * Type: RTH 5.18 Smart * Year of manufacture: 2017 * Operating hours: approx. 3,379 * Last service at approx. 3,355 operating hours! * Including pallet forks * Including remote control (radio controlled!) * Load capacity: approx. 5,000 KG Djdpfxszf T Ucj Adrswa * Lifting height: approx. 18 meters * German machine, 1st owner * In good condition! * 100 KW * Deutz diesel engine * CE declaration and exemption permit available * Video available upon request * Price: 64,900 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted.

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Dwsdpfx Adsyq Hgkeroa Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed drive type: SK01-R1000-/1/L/4 -Engine power: 0.37 kW -Speed range: 33-165 rpm -Motor: adjustable -Height shaft axis: 100 mm -Design: B3 -Drive shaft: Ø 20 mm -Quantity: 1 piece available Dwedpfx Adscfig Horea -Dimensions: 505/320/H195mm -Weight: 23kg

Condition: good (used), Year of construction: 1996, 2 lines of ridgid box making machines with an extra lid-closing machine at the end of the 2 lines. Dsdpoi Dpb Usfx Adrswa Price is 12.500,- € for each line. Sold only as set.

Condition: used, Year of construction: 2016, operating hours: 9,852 h, CAT M318F mobile excavator, manufactured in 2016, with only 9,852 operating hours! ---- * Manufacturer: CAT * Model: M318F * Year of manufacture: 2016 * Recorded operating hours: approx. 9,852 * Last inspection at approx. 9,523 hours (06/2025) * German machine / 1st owner * Includes Liebherr Likufix SWA48 hydraulic quick coupler Dwsdpfeyzld Dox Adroa * Includes 1 x deep dig bucket * Good tires * Good overall condition * Air conditioning * Central lubrication system * Power: 129.4 kW * CE documentation and data confirmation available * Price: 63,900 euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is subject to change without notice and does not constitute a guarantee. Errors and prior sale are reserved.

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 08/2027, machine/vehicle number: 2026, NEW NEW Bag/Pack Closure Machine NEW NEW Automatic and manual operation Clip band machine with date printing Stainless steel construction Single-person operation Packaging of baked goods such as bread, sliced bread, rolls, croissants, etc., as well as other food and non-food products Connection: 230V New device With warranty + spare parts service Dwodpfx Aew S Slhedrsa Quality from a specialist company! Benefit from over 35 years of experience! Options: Clip band Maintenance contract Service package Delivery service Training & commissioning Visit our large exhibition!

Condition: ready for operation (used), Deckel Maho 2238-4630 rotary table SN: 0174 for FP4-60 machine – diameter: 63cm / height: 43cm, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Dodpfoy Np Naox Adrowa