Used Optimat Factor for sale (443)

Year of construction: 2026, condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Number of phases 3 Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Maximum temperature 60 ± 5 ° С Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Noise level ≤ 70 dB Rodpfxogp I Upe Anyocf Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Redszvnfwspfx Anyecf Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: used, Year of construction: 2007, operating hours: 39,359 h, functionality: fully functional, machine/vehicle number: 0-201-04-0605, Description of the Main Equipment: Clamping table with matrix aluminium construction Vacuum system prepared for 1000 m³/h nesting technology Power Control control panel with PC85 Main spindle 15 kW with vibration sensor C-axis with aggregate interface Interface for FLEX-5 aggregate Plate-type tool changer with 10 positions Drilling unit: 13 spindles – 9 vertical and 2+2 horizontal spindles Software package for office computer Rcedoyucyzspfx Anyof WoodWOP Tools software Maximum positioning speed: 80 m/min in X and Y directions (vector speed: X/Y = 113 m/min) / 30 m/min in Z direction

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-261-07-3237, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, actuation type: electric, total height: 1,580 mm, total length: 4,780 mm, total width: 1,130 mm, overall weight: 1,630 kg, Equipment: CE marking, documentation/manual, I am offering a professional edge banding machine from Brandt, model Optimat KDF 430. * Brand: Brandt (HOMAG Group) * Model: Optimat KDF 430 * Year of manufacture: 2008 * Functions: Edge banding with EVA glue * Second glue tank for color changes * Diamond pre-milling cutter * Trimming unit * Pressure rollers * Circular saw for length trimming * Milling unit, top/bottom: rounding, chamfering, flush trimming * Corner rounding unit * Profile trimming blade Rcedjzrtbpjpfx Anysf * Surface trimming blade * Max. workpiece height: 60 mm * Max. edge thickness: 6 mm solid wood The machine is fully functional and ready for operation! Available from week 40/2026. Please feel free to contact me if you have any questions.

Condition: new, Year of construction: 2025, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Rodpfx Aov Dvkzjnyjcf Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale: Weeke Optimat BHX 500 vertical CNC machining center, manufactured in 2011, designed for drilling, milling, and grooving sheet materials in the furniture industry. The machine enables fast and precise machining of parts and is suitable for both serial and custom furniture production. Technical specifications: Model: Weeke Optimat BHX 500 Year of manufacture: 2011 Machine type: 3-axis continuous CNC machining center CNC control system: WoodWOP (Homag / Weeke) Maximum workpiece length: approx. 3050 mm Maximum workpiece width: approx. 1200 mm Maximum workpiece thickness: 80 mm Minimum workpiece length: approx. 200 mm Minimum workpiece width: approx. 70 mm Equipment: Drilling head with multiple vertical and horizontal spindles 96 drilling spindles (48 from above, 48 from below) 36 vertical spindles 12 horizontal spindles Grooving saw Milling cutter (from above and below) 125 mm saw, rotatable by 90° Automatic clamping and workpiece transport system Possible applications: Drilling for dowels and fittings Milling and grooving Machining of chipboard, MDF, HDF, plywood, and solid wood Advantages: The ability to machine two pieces simultaneously significantly increases productivity Fast retooling and workpiece changes High precision in drilling and milling Ideal for the production of cabinet furniture, kitchens, wardrobes, and interior elements Condition: Redezvftlepfx Anyecf The machine is regularly serviced and fully functional. Test run possible during inspection. Availability: end of October

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Rcsdpfx Ansv Dvfrjyof Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. Rodpjzr N H Uefx Anyocf • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: new, Year of construction: 2026, Workpiece height 8-45 mm (optional: veneering up to 60 mm) Minimum workpiece length 100 mm Minimum workpiece width 100 mm Edge thickness 0.4-3.0 mm Feed speed 9.5 m/min Cutting unit - engine power 1 x 0.27 kW Milling unit 2 x 0.35 kW Milling unit 12,000 rpm Corner finishing unit - minimum workpiece length 250 mm Corner finishing unit - minimum workpiece length 1 x 0.35 kW Corner finishing unit 12,000 rpm Pre-milling unit 1x 1.1;1 x 0.75 kW Pre-milling unit 12,000 rpm Edge cutting unit: Glue removal unit: Polishing unit - engine power 2x0.18 kW Polishing unit 2800 rpm Retractable support with rollers: Diameters of exhaust ports fi 120 mm Rsdpev Duvvjfx Anyecf Compressed air pressure 6.5 bar Total power 6.7 kW Dimensions - L x W x H 4200x800x1500 mm Weight 1180 kg + 2000 euros for option with a PUR glue

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working width: 1350 mm Abrasive belt width: 1350–1380 mm Abrasive belt length: 2150 mm 1 contact roller unit 1 combined sanding unit EPS 52 – Segmented electro-pneumatic pressure shoe. Constant workpiece inlet height: 900 mm. Abrasive belt drive with wear-free system. Abrasive belt blowing device Machine safety stop in case of improper use 7" graphic touch-screen display Conveyor belt feed with: adjustable feed speed via inverter, from 3 to 15 m/min. Infeed roller table, 250 mm wide, with rubber-coated rollers. Total installed power: approximately 33 kW Weight: approximately 4,000 kg Rcedpfx Anjzumywsysf Includes infeed and outfeed conveyors Few operating hours, used for approximately 3 years

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) Rodpozr N E Dsfx Anyocf • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: new, Year of construction: 2026, min. / max. veneer thickness 0.4 - 3 mm min. / max. veneer height 12 - 47 mm (optional: veneering up to 60 mm) min. / max. material height 10 - 45 mm min. material width 100 mm min. material length 100 mm material pre-milling 2 motors with power (diamond cutter) 2.2 kW feed motor power 2.2 kW panel desk at eye level : chain feed : loading plate for PVC and ABS edges : mechanical pressure zone driven by the main pressure roller and a series of pressure rollers to minimize the glue layer : central pressure setting : container for glue granulate : glue application to the material using a glue roller : electronic temperature control, working temperature 180 - 200 °C pneumatic tape cutting guillotine : control lamp for element spacing : double trimming saw for cutting off front and rear excess material : precise linear guides : trimming in motion for high cutting precision : veneering speed 9.5 m / min flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm. scraper unit: polishing unit top / bottom 2 x 0.18 kW, 50 Hz, 2,800 rpm. height and tilt adjustment: extraction connector 3 x fi 120 mm, 1 x fi 100 mm, roller table extension 250 mm: noise-reducing housing with a window to view the units: trimming unit 0.44 kW glue roller unit 0.55 kW glue tank heater 2.2 kW compressed air connection 6.5 bar total power consumption 9 kW / 400 V Rcodpfjv Dutbex Anyjf dimensions L. 3590, W. 1220, W. 1686 mm weight 1100 kg • Pre-milling with counter-milling cutters placed on heads ensuring the highest quality of processing. • Front and rear cutting with a double saw. Upper and lower milling on a separate cutter. • Radial or flat scraper (to choose from). -polishing unit • Equipped with a control computer with an LCD display. • Very simple operation with switching on/off individual units with a single button. • In a word, an ergonomic and precise machine at a very favorable price offer, unmatched on the global market. • Standard function of a replaceable glue tank.

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Rcsdpfxozwm Hco Anyof Belt width: 1370 mm Belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed rate: 2.5 - 13 m/min (infinitely adjustable) Belt blowing system Dust brush Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Location: Nattheim

Condition: used, Year of construction: 2000, functionality: fully functional, HOMAG Optimat BOF 31/40/G Rjdpfx Anjzr Nureyjcf Manufacturer: HOMAG Group (Germany) Machine type: CNC machining center (stationary machine) Year of manufacture: 2000 Design: Gantry design for maximum stability Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm • Y-axis (width): 1,200 mm • Z-axis (travel): approx. 400 mm (workpiece passage approx. 60–100 mm depending on clamping) Equipment and units • Main spindle: Liquid-cooled electrospindle (power 11 kW) • Tool clamping: HSK F63 • Tool changer: Disc tool changer with 12 positions, located on the gantry for quick tool changes. Clamping system • Table type: Full table • Vacuum pump: 2 pcs - Siemens Elmo water-type 2BL1 with a capacity of up to 60 m³/h Control and Software • Control system: HOMAG PC85 (based on Windows) • Software: woodWOP (one of the most widespread and intuitive systems for CNC machining)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels Rcodpfxezmrw Ss Anyjf 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Redpfx Aszuykcjnyjcf Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, Planer OPTIMAT SOLID W 520S with a spiral shaft Min. material thickness 10 mm max. material thickness 75 mm Planing width 520 mm Min. workpiece length 150 mm Min. workpiece width 10 mm Total length of the table 2750 mm Receiving table length 1200 mm Length of the feeding table 1500 mm Shaft length 520 mm Shaft diameter 121 mm Shaft rotation 5000 rpm Time to shaft stop less than 10 s Number of knives 126 Knife dimensions 15 x 15 x 2.5 30° Guide dimensions 1200 x 190 mm Guide inclination from 90° to -45° Motor power 5.5 kW Table height (from the ground) 845 mm Diameter of the extraction spigot 120 mm max. cutting depth 8 mm Rcodpslvuqfjfx Anyof Sound power level 99.2dB(A) Weight 800 kg

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg Redsv Dvhyjpfx Anyecf The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3820, operating hours: 13,696 h, Workpiece length X: 200-3050 mm including roller conveyor Workpiece width Y: 50-1250 mm Workpiece thickness Z: 8 - 80 mm Vector speed: X/Y = 50 m/min; Z = 15 m/min Equipment: VERTICAL BORING UNIT V 15 HIGH SPEED including quick-change system and spindle clamping HORIZONTAL BORING UNIT WITH 6 SPINDLES IN X DIRECTION HORIZONTAL BORING UNIT WITH 4 SPINDLES IN Y DIRECTION NUT SAW IN X/Y DIRECTION 90° PLAUSIBILITY CHECK (X/Y) TOOL CHANGING SPINDLE 9 KW including converter 4-POSITION PICK-UP CHANGER, side-mounted POSITIONING CYLINDER for workpiece positioning WORKPIECE CLAMPING SYSTEM WORKPIECE HANDLING MACHINE CONTROL: POWERCONTROL with Powertouch MACHINE OPERATION: POWERCONTROL SOFTWARE: WOODWOP; TOOL DATABASE; MACHINE DATA ACQUISITION; PRODUCTION LIST SOFTWARE; OFFICE PACKAGE; WOODWOP DXF IMPORT BASIC; WOODASSEMBLER; 3D SIMULATION Rcedpfxozlbwfj Anyjf Operating voltage: 400 VOLT; Frequency: 50 HZ Energy-saving function

Condition: new, Year of construction: 2026, Edge thickness 0.4 - 3 mm Thickness of glued boards 10 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Corner milling unit 0.75 kW Transport belt unit 1.5 kW Overall dimensions 4500 x 700 x 1450 mm Transport dimensions 4280 x 650 x 1280 mm Weight 1230 kg Pre-milling milling: diamond milling cutter. Gluing Final cutting Milling: two motors Corner finishing Radial scraper Flat scraper (glue) Spray system Polishing Internal lighting Automatic lubrication Electrical equipment: Delta brand Rodpfev Dt T Hsx Anyocf

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Rjdpfozq Ab Njx Anyocf Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: used, Year of construction: 2014, Drilling and dowel insertion machine Manufacturer: Weeke Type: OPTIMAT ABD150 Year of manufacture: 2014 Technical data Note: Rjdpfxozuyn Ie Anyocf The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, Vertical CNC boring and machining center Workpiece length 200 - 3,050 mm Workpiece width 70 - 850 mm Workpiece thickness 12 - 60 mm Milling spindle 1 unit Main spindle power 5 kW Max. speed 18,000-24,000 rpm (depending on configuration) Tool interface HSK-F63 or ETP25 Tool changer 4-position magazine Vertical boring spindles 13 Horizontal boring spindles X 4 Horizontal boring spindles Y 2 Nut saw X-direction Control system Homag powerTouch / Power Control PC 86 Software WOODWOP 7.x Total connected power 11.5 kW Compressed air requirement 7 bar Rjdpfx Aszuw Dtsnyocf Machine weight approx. 1,580 kg Installation dimensions (L W H) approx. 2,950 1,984 1,895 mm CE marking

Condition: used, Year of construction: 2022, PANEL SAW Manufacturer: HOMAG Rsdjzkmrfepfx Anyecf Type: SAWTEQ B-200 Optimat HPL200/38/22 Year: 2022 With loading system

Condition: new, Year of construction: 2025, Planer: Working table dimensions 400 x 1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400 x 20 x 3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400 x 760 mm Feed speed 7 m / min Working height 4 - 220 mm Rjdjg S Nx Dopfx Anyjcf Bohring agregate: Working table dimensions 250 x 500 mm Longitudinal / transverse / vertical travel 205/95/90 mm Spindle (M18 * 1.5-S) 0-16mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 410 kg Machine has spiral roller Machine is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.