Used Orma Shelf Press Orma Npl-8-160 for sale (50,376)

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, type of input current: three-phase, pressing force: 160 t, table length: 3,500 mm, total length: 4,650 mm, total width: 1,650 mm, total height: 2,550 mm, overall weight: 6,000 kg, operating temperature: 130 °C, opening width: 480 mm, plate width: 1,300 mm, temperature: 130 °C, Equipment: hot water, ORMA NPL-8-160 Shelf Press Specification: • Condition - used, fully serviced • Manufacturer - ORMA • Model - NPL-8-160 • Shelf dimensions: 350 x 130 cm • Maximum clearance between shelves: 480 mm • Straight, clean shelves with no dents or damage • 8 cylinders, each 85 mm diameter • Maximum pressure: 350 bar • Maximum pressing force: 160 tons • Option to operate with only central cylinders (for short workpieces) • Automatic repressurization in case of pressure drop • Glue curing timer with automatic shelf lowering • Shelves suitable for water/glycol or oil heating • Circulating pump and heating boiler included • Maximum heating medium temperature: 130°C • Equipped with a safety wire (emergency stop) • Original paint, all parts original • Weight approx. 6000 kg • Year of manufacture: 1991 • Overall dimensions: 465 x 165 x 225/255 cm (L x W x H / H with collection tank) Additional information: Bjdpsxdxwasfx Aigewr • Perfect, factory-grade technical condition • Photos shown represent the actual condition of the item for sale • Demonstration and inspection of the machine on-site possible

Condition: used, functionality: fully functional, On offer: ORMA shelf press, shelf size 300x130 The machine is used, has undergone a technical inspection, is fully functional, and ready for operation. After servicing, seals and oil were replaced. Before purchase, it can be started and thoroughly inspected at our company's premises. Specifications: • Manufacturer: ORMA • Shelf dimensions: 300 × 130 cm • Maximum clearance between shelves: 385 mm • Shelves: stainless steel, straight, clean, without dents or damage • Number of pistons: 4 • Piston diameter: 85 mm • Maximum hydraulic system pressure: 350 bar • Automatic after-pressing in case of pressure drop • Shelves adapted for water heating • Safety cable / safety release • Engine power: 2.2 kW • Overall dimensions: 345 × 148 × 195 cm (length × width × height) • Weight: approximately 3000 kg Bjdpezkhlasfx Aigowr Additional information: • Good technical condition • Machine preserved in its original condition • Photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using MDD fleet, courier companies, or external carriers • We assist in obtaining leasing or a lease loan • Transport costs are determined individually.

Condition: like new (used), • condition - used, after inspection Bwodpowlwr Isfx Aiger • manufacturer - ORMA • model - C4 • shelves measuring 250 x 120 cm • max. clearance between shelves 490 mm • shelves straight, clean, without dents/damage • 4 pistons with a diameter of 55 mm • max. pressure 150 bar • pump motor 1.1 kW • gluing time stopwatch • shelves heated with liquid • possibility of switching on and checking the device on site

Condition: used, Year of construction: 2004, functionality: fully functional, ORMA NPC-4-70 Shelf Press – after technical inspection, ready for operation Specification: • Condition – used, fully serviced • Manufacturer – ORMA Bwodpeyxdluefx Aigsr • Model – NPC-4-70 • Shelf dimensions: 250 x 130 cm • Max. clearance between shelves: 480 mm • Shelves are straight, clean, with no dents/damage • 4 cylinders with 70 mm diameter • Max. pressure: 300 bar • Max. pressing force: 70 tons • Automatic pressure compensation in case of pressure drop • Shelves convertible for water/glycol or oil heating • Circulation pump and heating boiler included • Maximum power consumption: 20 kW • Equipped with safety pull-cord • Original paint finish • Weight approx. 3,000 kg • Year of manufacture: 2004 • Overall dimensions: 310 x 190 x 210 cm (L x W x H) Additional Information: • Good technical condition, after complete seal replacement • Photos show the actual item for sale • Possibility to power on and inspect the machine on site • Auction price excludes VAT and transport costs Financing & Transport: • We organize transport using MDD fleet, courier services, or external carriers • Financing options available through leasing or lease-loan arrangements

Condition: new, Equipment: CE marking, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm Bsdpfx Aey U Hmgoigjwr 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Bodpfx Aiozlaitegewr Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm Bedpszrpufefx Aigjwr material thickness at 800 mm material width (Niro) 0,6 mm material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² speed - 35 m/min power requirement 2,1 kW weight 7,0 t dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Bodpsw Inudsfx Aigjwr Weight: approx. 280 kg

Condition: good (used), functionality: fully functional, Capacity 160 tons --- Bending length 1250 mm --- Stroke 250 mm --- Thrust 500 mm --- Max. installation height 480 mm --- Weight approx. 11.2 tons --- Bsdjzp Uxdopfx Aigewr Power 30 kW --- System tool holder + tools

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Bwjdpfot Eq E Sox Aigor Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: used, Shelf press Tiger 1000x2200 19/26 Bodpfxezkh H Ro Aigjwr

Condition: good (used), crane block, crane hook, load hook, single hook Bsdpfju Richox Aigowr -Crane hook: load hook with holder -Load capacity: kg -Dimensions: see photos -Dimensions: 490/160/H1090 mm -Own weight: 81 kg

Condition: used, Technical specifications: Max. dimensions of the glued component: 2900 x 1900 mm 3 vertical clamps 2 horizontal clamps Hydraulic clamps Power supply: 400 V Motor power: 1.5 kW Motor speed: 1410 rpm Overall dimensions: Bwjdpfx Aijzikz Ujgjr Length: 3500 mm Width: 1000 mm Height: 2600 mm

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 60 mm Shelf dimensions: 1000x2500 mm Clearance: 480 mm Hydraulic clamping system Safety switch Motor power: 1 kW Power supply: 400 V Overall dimensions: Length: 2800 mm Bwodpfx Aszh U N Heigor Width: 1220 mm Height: 1980 mm

Condition: used, Technical specifications: Number of pistons: 6 Piston diameter: 70 mm Bwedpfx Aezh U I Neigsr Connection to central heating system Integrated heating element Shelf dimensions: 1300x3000 mm Clearance: 410 mm Hydraulic clamping system Safety switch Engine power: 2 + 12 kW Power supply: 400 V Overall dimensions: Length: 3550 mm Width: 1550 mm Height: 2030 mm

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 8,776 h, load capacity: 1,600 kg, lifting height: 8,000 mm, free lift: 2,750 mm, fuel type: electric, mast type: triplex, construction height: 3,390 mm, drive type: Elektro, Reach truck Load center: 600 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 48V Bsdpfexc Rzujx Aigowr Battery capacity: 775Ah Battery year of manufacture: 2012 Description: Side shifter, without clamp - including fork tines 3rd valve, 4th valve, full free lift, CE certificate, LED

Condition: used, Technical specifications: Number of pistons: 6 Piston diameter: 60 Connection to central heating – None – cold shelves Shelf dimensions: 1300x3000 mm Clearance: 475 mm Hydraulic clamping Safety switch Motor power: 3 kW Power supply: 380 V Bwedpfx Aiozd Ekaogor Overall dimensions: Length: 3360 mm Width: 1470 mm Height: 1750 mm

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons Bedpfogv I Ihsx Aigowr 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Bwodpfowndnuox Aigjr Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Bsdoy Tptaopfx Aigowr Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: new, Year of construction: 2026, functionality: fully functional, PLATEN LENGTH MM. 3000 PLATEN WIDTH MM. 1300 Bedpji E Tz Hjfx Aigswr PRESS STROKE MM. 400 VERTICAL CYLINDERS 6 - DIAM. 70MM. INTERMEDIATE PLATENS CONFIGURATED TOTAL THRUST 90 TON TOTAL POWER KW 21 HEATING DIATHERMIC OIL

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front supports for sheet metal, sliding (with T-slot and stops) Bsdpfxofiqdce Aigowr Hydraulic blocks and valves in special design, in accordance with globally applicable standards Electrical equipment, in accordance with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional front sheet metal support system, sliding Special sea packaging 8-meter press brake, 320 tons. Bilk9emkq3 With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our mission is to be your direct contact on site and to offer you services related to training and customer support. We are happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always there when you need us to react quickly and efficiently. Here, we are your reliable partner for technologically high-quality solutions in sheet metal processing.

Year of construction: 2024, condition: new, Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor for rear back gauge and linear ball screw system (X-R) CNC crowning European-style tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional equipment: Control unit - ModEva Premium, 69T and 66T CE manual F. AKAS II M FPSC-B-C + safety guards with switch CE F. AKAS-LC II AKAS-3 M motorized + FPSC (safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm – rear guard with light curtain AP3-AP4 bending aid Height-adjustable laser angle measuring system Bodpfxjfiryfj Aigowr Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Parking area Central lubrication system Oil cooler Additional back gauge finger and additional adjustable support arms Special packaging for overseas transport

Condition: new, Everything is configurable on request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, complying with globally applicable standards Electrical equipment, complying with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment Bwodefiqa Repfx Aigsr R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional sliding front support system for sheet metal Special sea-worthy packaging 8-meter press brake, 800 tons. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to provide you with services relating to training and customer support. We are happy to support you from Germany – from consultation to purchase and throughout the entire life cycle of your machine. With our German branch, we are always available locally to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: used, Year of construction: 2001, operating hours: 2,500 h, total length: 3,540 mm, total width: 1,500 mm, total height: 2,330 mm, Colour: Grey Weight: 8.230 kg - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 5356 - Operating hours: 2500 - Drive system: Conventional - Power [kW]: 11.0 Bjdpfx Aijy Thmxjgowr - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 200 - Tools included: Yes - Transport dimensions: 3540mm x 1500mm x 2330mm (l x w x h) - Transport weight [kg]: 8230kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum