Used Other Special Machine for sale (79,964)

Condition: used, Second-hand machine In all operating modes, the materials are fed from the front through the roller gap and joined together by pressure Standard number of axes: Material unwinding 2 Silicone paper unwinding 1 Roller gap adjustment 0–52 mm Pressure 0.3–0.8 N/mm Processing speed maximum 5 m/min Slow operation 0.6 m/min Reverse operation 0.6 m/min Noise level > 70 dB(A) Material data: Max. width 1400 mm Max. material diameter: Unwinding diameter 200 mm Silicone paper take-up diameter 150 mm Max. panel thickness 50 mm Inner diameter of roll core: 76.2 mm Bdsdpfxjznk A No Apvef Power supply 230 V Availability: short notice Storage location: Röllbach

Condition: used, machine/vehicle number: 22011 SLS, Year of construction: 2023, Laser Data Marking Laser Manufacturer: Keyence Model: MD-X2520A Laser type: YVO₄ laser Laser class: 4 Wavelength: 1063 nm Output power: 25 W Laser Position Detection Bdjdpfxozilv Hs Apvof Laser type: Semiconductor laser Laser class: 3R Wavelength: 683 nm Output power: 5.0 mW Guide Laser / Distance Indicator Laser type: Semiconductor laser Laser class: 2 Wavelength: 655 nm Output power: 1.0 mW Electrical Data Nominal voltage: 400 VAC Frequency: 50 Hz Control voltage: 24 VDC Nominal current: 23 A Power: 15 kW Back-up fuse: 50 A Diversity factor: 0.9 Power supply: 3 × 400 V + PE

Condition: used, Year of construction: 1984, cycle time 0 sec total power requirement 2,5 kW weight of the machine ca. 1 t dimensions of the machine ca. m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Bjdpfx Ast Hwvgspvjdf Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp.

Year of construction: 2013, condition: used, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Bdodpfx Apoy Ihblsvjf if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm Bjdpfjxdttpsx Apvsdf - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 Bdjdpfxsv N Uyrs Apvof - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: used, Type: FM611E1 400V/3N - 15A - 50Hz - 9.2kW Bdsdpfx Apjzcgc Njvjf dimension Length: 980mm Width: 770mm Height: 840mm

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm Bdedpou Nu N Rjfx Apvef total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is *

Year of construction: 1992, condition: used, Technical details: Bodpfx Apevc Atgjvsdf voltage: 380 V/Hz sizes from - to: Ø 6 bis Ø 50 mm total power requirement: 1,5 kW weight of the machine approx.: 293 kg dimensions of machine: 690 x 380 x 1150 mm Application: Assembly of hose lines Process: pressure-controlled pressing with assembly tools Hydraulics 240 bar overpressure, capacity/capacity for 20 liters Electro-hydraulic drive Operation ON/OFF switch and foot control Machine is currently equipped with jaw set DN 12 16 (code 220) Further jaw inserts available: DN 6 - 10 (code 215) DN 20 - 25 (code 230) DN 32 (code 240) DN 40 (code 245) DN 50 (code 260) without code: DN 21; DN 22; DN 33; DN 34; DN 35; DN 37; DN 39 *

Condition: used, Technical details: diameter: Nr.1: ca. 6 mm diameter: Nr.1: max. 25 mm connection electric: 400 V motor: Getriebemotor / gear motor total power requirement: 0,25 kW weight of the machine approx.: ca. 120 kg space requirements approx. LxWxH: 0,85x0,6x0,1,0 m Wire Peeling Machine Bdedpeu Nw Snofx Apvef Application: peeling of electric wires to be processed parts: wires with PVC coat / rubber coating wire feed via angular rail 40mm on a length of 600mm infeed manual driver roller dia=80x21mm serrated copy of manual is available i.D. *

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Bdedpfsu A Dg Eex Apvsf Synchronous welding control 8036 Weight: 685 kg

Condition: used, machine/vehicle number: 12195, Infeed: 600 x 600 mm Bjdpfx Asyr Tnqopvodf Drive: 2 x 37 kW

Condition: used, machine/vehicle number: 9394, Year of manufacture: 2015 Technical Data: Main dimensions (length/height/width): 1430/1730/780 mm Discharge opening diameter: 102 mm Number of knives and blades: 3+1+9 Drive: 22 kW Total machine weight: approx. 400 kg Bjdpfx Apoyr Tlisvodf Possible screen perforations: Ø 4–25 mm

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. Bdodeyr Tkfopfx Apvjf The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption

Condition: new, machine/vehicle number: AMIS Kabelaufbereitung, System consisting of a granulator, sorting table for separating liberated plastic and copper granulate, extraction unit, and control cabinet. Each component is pre-assembled as a transportable element on base plates. Bdedpsyr Ti Uefx Apvof Advantages of the compact system: low overall height, minimal space requirements, component arrangement designed for easy cleaning and maintenance, short installation time, and last but not least, attractive pricing.

Condition: new, machine/vehicle number: 10463, The AR series are slow-running machines. They are available with 2, 4, 6, or 8 screw shafts. Each screw unit is installed independently and separately in the chassis. Bdedpjyr Ti Ijfx Apvsf Screw shredders are designed for the shredding of brittle materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to contaminants such as glass, metal parts, stones, etc. The AR series is optimally suited for use as a bale opener, e.g., for PET bottle bales.

Condition: new, In every economic and public sector calculation, waste transportation is a critical factor. Here, it is not so much the weight but rather the volume that matters. The continuously rising transport costs for this waste are becoming an increasing economic issue. Proper disposal of large quantities of polystyrene or packaging film is particularly important in the retail sector. The VOLUME REDUCER ensures a volume reduction of up to 80 percent at this point. Bottles of any type and size, e.g., sparkling wine bottles, can be shredded effortlessly without the need for a compression mechanism. It is also possible to unpack expired food products. Furthermore, reject items such as pharmaceuticals, data carriers, or counterfeit products can be rendered unusable. Food residues and organic waste, including bones, can be shredded, collected, and converted into electricity and heat in biogas plants using the VR60. Consider, for example, a reverse vending machine for deposit bottles. PET bottles are compressed and held under lock and key until collection due to the presence of a barcode. By using the VOLUME REDUCER, the barcodes on PET bottles could be made unrecognizable, thereby achieving significant volume reduction. The shredded bottles could then be collected in a large container, eliminating the need for daily collection at return points. The shredder's vertically moving, wear-free blades ensure a quiet and clog-free operation. ALL ADVANTAGES AT A GLANCE - Non-rotating shredder - No material entanglement thanks to non-rotating blades - Automatic feed through blade movement - Automatic reversing V-shaped blades prevent jamming or blockage - Fast component change thanks to modular system - Intelligent control via compact logic system (PLC) Bedsyr I H Ujpfx Apvsdf - One-button operation - Optional material discharge via conveyor belt - Shredder module can be integrated into existing systems - Low blade wear and maintenance costs due to highly abrasion-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL - Dimensions: 90 cm x 70 cm x 85 cm - Weight: approx. 190 kg - Power consumption: 3 kW - Connection value: 400 V three-phase alternating current

Year of construction: 2025, condition: new, Dimensions (L/W/H) 6300x2000x2350 mm Weight 1250 kg Total power requirement 32,5 kw Bdjdpfov A Hixjx Apvsf

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET double drum sander DDS-237, equipped with a powerful 400V motor with 7.5 HP and a maximum sanding width of 940 mm. This demonstration unit is in excellent condition. Technical Specifications - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min - Maximum sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction port: 2 x diameter 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping via haulage company: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Bodpfsycc R Nsx Apvodf Reference: R-A0117

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Bedpfxex H Ucte Apvodf Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: new, With 2 eccentric clamps and motor protection. Adjustable end stops for transversal and longitudinal operations. Drilling unit tiltable on both sides Westcott-drill chuck mm with protective cover Smooth running height adjustment of drilling unit by hand wheel Easy and comfortable one hand operation. Stop bar for series usable on both sides. With pin drilling device and mitre fence Technical data: Pin point distances 16, 22, 25 und 32 mm Table dimensions 600 x 320 mm Drilling depth 205 mm Bodpfxex H Ucmj Apvedf Drilling length 250 mm Vertical table stroke 165 mm Tilting of drilling unit on both sides 45° Motor speed 2840 rpm Engine power 3 kW S6 (2,2 Kw S1) Weight 180 kg

Condition: good (used), The machine consists of two units and offers the following functions: 1. Drilling dowel holes 2. Dowel milling 3. Glue injection 4. Dowel insertion Bodpotpqafofx Apvjdf Completely cleaned glue system; Positioning laser; We can send you a video demonstrating the machine in operation. Process time is only approx. 3 sec/cycle You can call or write to us. We speak and write in German and Russian. You may also send messages in English. 5.3.4

Condition: like new (used), DEMONSTRATION MACHINE Bdsdpfxeycc Tde Apvjf For sale is an as-new JET belt and disc sander JSG-31A with a 300 mm disc diameter. The demonstration unit is in original condition, so you receive the full warranty. Technical specifications: - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Belt sanding table size: 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° to 90° - Extraction port: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping (by freight forwarder): Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Condition: used, - 3-layer blown film line on rotary platform Bdjdpfx Aoxq Hcdepvjf - Product-specific modifications and adjustments are possible (subject to charge) - Spare screw, spare cylinder and various spare parts are additionally available for this line Freight terms: ex location Delivery time: by arrangement Payment terms: 100% in advance before machine takeover, strictly net

Condition: used, Miter chop saw for aluminum (special machine construction with 4 servomotors) Circular saw, miter saw, crosscut saw Year of construction: 2002 Saw blade diameter: 500 mm Cutting range at 90°: Round Ø 180 Rectangle 350 x 140 mm (through crosscut) Cutting range at 45°: Round Ø 180 Rectangle 350 x 100 mm (through crosscut) Base carriage guide length: 1100 mm Travel on the base carriage (forward/backward): 650 mm Travel on the stand (up/down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power connection: 400 volts, 50 Hz - Controlled crosscut movement - Controlled saw blade height adjustment - Controlled miter cut through pivoting saw head - Controlled miter cut through tilting saw head - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gearbox (Motor MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Axis movement perpendicular via INDRAMAT servomotors and ball screw spindles (Motor MKDO41B-144-KP1-KN) - A total of 4 Indramat servomotors are installed - Very good German machine engineering Space requirement: L x W x H 1150 x 1100 x 1400 mm Bdodpfjdzp T Djx Apvsf Weight: approx. 360 kg Good condition This unit comes from a special machine for specific products. All other components and electrical parts for the construction of a new special machine are also available.