Used Parker Zander Adsorption Dryer for sale (1,848)

Year of construction: 2023, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: OFASHL060-40G16AE, Parker Zander adsorption dryer Compressed air preparation system OIL FREE AIR SYSTEM. The OFAS combines sophisticated OIL-X filtration technology with one Optimized drying system to deliver consistently high performance over the long term. The air quality has been externally certified according to ISO 7183 and 8573-1 and meets the requirements of class 0 for the total oil content if required. With dew point control, regeneration air volumes adjustable Exhibit: Parker / Zander adsorption system OFASHL060-40G16AE Year 2019 Technical data: Compressed air connection: BSPT G 1/2 " Flow rate: 1.65 m³ / min at pressure dew point -20 ° C 1.50 m³ / min at a pressure dew point of -40 ° C Removes dirt, oil and water up to 0.003 μm Max. Pressure 16 bar Dimension: Width: 559 mm Depth: 490 mm Height: 1510 mm Weight: 93 kg Cedpfjd Sninsx Abtohb The OFAS system is officially certified by Lloyd to ISO 8573-1 Class 0 in terms of the total oil content of the compressed air from oil-lubricated and oil-free compressors. Other models and designs on request!

Year of construction: 2023, condition: as good as new (ex-display), Parker Zander Adsorption Dryer K-MT6 cold regenerated, with multitronic-plus control with pressure dew point control with pre- and post-filter Exhibit: Parker / Zander Adsorption System K-MT6 YOC 2023 Technical data: Compressed air supply: BSPT G 1/2" Flow: 0.93 m³/min at pressure dew point -40°C Other models and designs on request ! Chjdpem Twwbjfx Abtjb Max. pressure 16 bar Min. pressure 5 bar Compressed air inlet temperature: 25° to 50°C Ambient temperature 1.5°C to 50°C Installation site: frost-free indoor installation in a non-aggressive atmosphere. Mains voltage: 230 V , 50-60 Hz Protection Class: IP65 Dimension: Width: 493 mm Depth: 300 mm Height: 1203 mm Weight: 48 kg Visit our shop. We always have a large selection of compressors and dryers in stock.

Condition: like new (used), Year of construction: 2019, pressure (max.): 16 bar, Adsorption Dryer Parker Zander K-MT 35-95/D3 Generation 3 Manufacturer: Parker Hannifin Manufacturing S.r.l. / Parker Zander Model: K-MT 35 Version: K-MT 35-95/D3 Generation 3 Cjdoyrunrspfx Abtohb Serial number: 399893960001 Year of manufacture: 2019 Voltage: 230 V Frequency: 50–60 Hz Protection class: IP65 Max. operating pressure: 16 barg Min. operating temperature: 1 °C Max. operating temperature: 50 °C Condition: new / unused Machine type: adsorption dryer for compressed air

Condition: excellent (used), Year of construction: 2009, The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear design. Key features of the K-MT series adsorption dryers, such as: • one-piece adsorber profiles • separately controlled main and discharge valves in a leak-free design • compact check valve combination, guarantee continuous operational reliability and high availability. All K-MT series adsorption dryers feature: • self-cleaning screen trays on the wet side • high-quality desiccants During adsorption, the desiccant stores the moisture contained in the compressed air. Parker Zander uses exclusively highly active, high-capacity molecular sieve desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place in the opposite direction to adsorption. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerated adsorption dryers is based on: Operating pressure 7 bar Inlet temperature 35°C Pressure dew point -40°C for a cycle with: - 5 minutes of adsorption - 4 minutes of desorption - 1 minute of pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load cycles per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load cycles per hour and therefore inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs with reduced wear. Multitronic, the control system with groundbreaking new functions and a new design, is perfectly tailored to the K-MT series of cold-regenerating adsorption dryers. It allows for highly effective adaptation of the adsorption dryer to even the most diverse operating conditions. From the continuously visible status to the pressure dew point control of the adsorption dryer, the benefits for the operator are readily apparent with Multitronic. Housed in a clear and easily accessible control cabinet, the Multitronic system offers: • user-friendly microprocessor control for all Parker Zander Heatless dryer systems • flexible cycle time settings. • Front-panel LEDs for individual functions such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as synchronization with the compressor Optional features: Cedsypb Dujpfx Abtshb • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit • The ability to set the desired dew point in the range of -25°C to -40°C Technical specifications: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection watts: 50 Year of manufacture: 2009 Manufacturer's price: €8,880 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm Chsdjyzaamspfx Abtob inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: excellent (used), Year of construction: 2002, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) Cedszwmacopfx Abtohb This unit was specifically designed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 2002 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2004, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically developed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food processing, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 2004 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request! Chodpfjzwl Rgox Abteb

Condition: excellent (used), Year of construction: 1998, Ultrafilter Laserpac LP ​​0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically developed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 1998 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! Csdpezwl Hzefx Abtjhb International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2007, Build in 2007 Pressure max 16 bar Cedpfx Asg Dctyobtshb Desiccant dryer, heatless regenerated

Condition: excellent (used), Year of construction: 2005, ATLAS COPCO CD170 Adsorption Dryer Serial number: AII801294 S014387 Codpozl Uhdefx Abtohb 11 bar Year of manufacture: 2005 6.12 m3/min NEW FILTER CARTRIDGE!

Condition: used, Year of construction: 1987, Granule dryer, compressed air dryer, granulate drying plant, adsorption dryer -Manufacturer: Zander, adsorption dryer type K1300MS -Operating pressure: 7 bar, max. 16 bar -Container capacity: 200 litres each -Individual components: see photos -Transport dimensions: 1250/750/H1960 mm Chodpfstpyqxjx Abtsb -Weight: 684 kg

Condition: excellent (used), We are offering a Beko adsorption air dryer for sale. BEKO activated carbon adsorber CLEARPOINT 2X, DRYPOINT dust filter S075RFWMX Condensomat Bekomat 20 FM KA20K1ZAR BEKO activated carbon adsorber CLEARPOINT 2X Type: Beko adsorption dryer Condition: used Chedszd Uuuepfx Abtsb Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2011, PROD. KAESER TYPE DC108E S/N 9.5487.00010 1198 YEAR 2011 POWER (kW) CAPACITY (m3/min) 10.93 PRESSURE (bar) 5 / 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER Chsdpfxoy T Ng Tj Abtob BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS CONNECTION 2 NEW/USED USED

Condition: used, Compressed air adsorption dryer, activated carbon adsorber with post-filter BOGE type DAZ 5-2 For particularly dry air Manufacturer no. 38315449 Year of manufacture 2013 Volume flow max. 250 liters/min. = 15 m³/h Chsdevrkhkepfx Abtsb Operating pressure max. 16 bar Connection thread G 1/4“ Mains connection 230 volts, 50 Hz - Pre- and post-filter Space requirement L x W x H 400 x 210 x 580 mm Weight 15 kg good condition

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: APF271056, total width: 960 mm, total length: 1,770 mm, total height: 2,590 mm, overall weight: 1,720 kg, operating pressure: 10 bar, pressure dew point: -40 °C, warranty duration: 12 months, input voltage: 400 V, The dryers of the BD 360+ to 1260+ series are heat-regenerated adsorption dryers that remove moisture from compressed air through an adsorption process. All dryers in this series are equipped as standard with an innovative Smart Cycle control algorithm, which leads to significant energy savings during partial load operation without the need to add an expensive option. All components are mounted on a common base frame, fully wired and ready for installation, with generously sized vessels and piping to minimize pressure drop within the dryer. The dryer can deliver dry air with a low pressure dew point of -40°C or -70°C (optional) into the compressed air system. Pre-configured, including the following special equipment: - Pressure dew point sensor Cedpfst It N Ssx Abtshb - Vessel insulation - Blower filter Brand new with 12-month warranty from date of delivery. Optional installation and commissioning at a very competitive price is available from stock in Wettenberg.

Condition: like new (used), CONTEC-COMPRESSORS PARKER DOMNICK HUNTER CRD 0660 REFRIGERANT DRYER Chsdpfx Abjd Exrbjtob CAPACITY: 11 M3/MIN. YEAR OF MANUFACTURE: 2005 THE DRYER IS IN FULLY WORKING CONDITION. TOP-TIER IN TERMS OF PRICE AND QUALITY. I HAVE A LARGER QUANTITY OF SCREW COMPRESSORS AND REFRIGERANT DRYERS, AS WELL AS WELDING EQUIPMENT, FOR SALE. INSTALLMENT PAYMENTS AVAILABLE!!! CONTEC-COMPRESSORS

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Chodpfx Aer A El Eobtsb Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: used, Year of construction: 2003, volume flow: 283 m³/h, total width: 1,183 mm, total length: 1,200 mm, total height: 2,073 mm, pressure: 7 bar, overall weight: 605 kg, pressure dew point: -40 °C, pressure (max.): 16 bar, Equipment: type plate available, 1 heatless adsorption dryer Manufacturer: Kaeser Type: DC47E Flow rate: 283 m³/hour (4.72 m³/minute) Pressure dew point: -40°C Inlet temperature: 35°C Outlet temperature: 35°C Operating pressure: 7 bar Max. operating pressure: 16 bar Compressed air connection: DN25 (R1") Adsorbent: activated aluminum oxide Vessel capacity: 133 liters Codpfx Abjv T Tw Rjtjhb Filling weight: 60 kg Dimensions: Height: 2073 mm Width: 1183 mm Depth: 1200 mm Weight: 605 kg

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. Csdoq Igyvepfx Abtjhb - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: Chodpfxeq Nfuze Abtob - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, functionality: fully functional, Year of construction: 2001, fuel type: electric, CARRELLO ELEVATORE usato ELETTRICO ELWELL PARKER (HOIST) PORTATA 100 Q CON POSIZIONATORE FORCHE.SUPERCOMPATTO. COMPLETAMANETE REVISIONATO CON IMPIANTO ELETTRONICO DEL SOLLEVAMENTO NUOVO. Cjdpozyf Ahjfx Abtshb

Condition: used, Year of construction: 2016, Parker AKM 60 Csdpfx Abezx Davotjhb

Condition: new, feed pressure / bar liter capacity / l total power requirement / kW Cedpey S Dz Njfx Abtshb

Year of construction: 2015, condition: refurbished (used), Laboratory gas generator with a capacity of 12.5 liters/min and a purity of 0.5% residual oxygen. The system was completely overhauled by us, the company Airtech Stickstoff GmbH, as an authorized partner of Parker. We can also take over the service for you. Csdpfx Aon R Naujbtohb

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Gz7iapb Chjdpfx Ajnq Di Tjbteb All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries...