Used Pee-Wee P 24 Q for sale (49,359)

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Ibodpfxoh A S Hte Ab Ieb Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Iedeuz If Nspfx Ab Ijbb Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t Ibsdpezd Hhaefx Ab Isb max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Year of construction: 2018, condition: used, machine/vehicle number: P18.0003, Rated power: 14.5 kW, speed range: 20-18,000 rpm, tool holder HKS-A63, 30-position tool changer, oscillating machining, controlled NC swivel milling head, machine weight: 2,200 kg, 1 steel drawer cabinet (gray), dimensions (W x H x D): approx. 80 x 120 x 80 cm, 8 drawers, filled with various accessories, 1 workbench, 1 with a sub-mounted steel drawer cabinet on the left, approx. 200 x 70 cm, 6 drawers, with contents. Ijdpozqzadofx Ab Ijbb

Condition: new, Thread rolling dies for various rolling machines, including UPW, UPWS, P10, P60, and ORT, with bores of 28 mm, 54 mm, 63 mm, 69 mm, 85 mm, 80 mm, 100 mm, and 110 mm. The dies can be ground to the desired thread profile. Ibedpfx Aszfybceb Ieb A list of available dies can be found in the image gallery. Price in EUR per set (2 pieces).

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Ibjdpfx Abjxbfwzo Ijb Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: used, empty load weight: 6,969 kg, maximum load weight: 32,377 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 04/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,620 mm, suspension: air, tire size: 435/50 19,5, color: blue, Year of construction: 2019, front tire size: 435/50 19,5, rear tire size: 435/50 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40678 Schmitz, SCS * Year of construction: 2019 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Plain tarpaulin * Fixed roof * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop rail * Mechanically operated roof lift * Portal door * Air connection, coupling head (red + yellow) Iodsy Ttt Djpfx Ab Iebb * Connecting plug, 2x7-pin * Connecting plug, 15-pin * Lifting and lowering device * Ferry lashings * Storage box / toolbox * Galvanized * New tarpaulin * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 6,969 kg * Payload: 32,377 kg * Permissible gross vehicle weight: 39,346 kg * Tire condition, 1st axle: -- - Tire size: 435/50 R19.5 * Tire condition, 2nd axle: -- - Tire size: 435/50 R19.5 * Tire condition, 3rd axle: -- - Tire size: 435/50 R19.5 * Tire sizes: 435/50 R19.5 * Internal dimensions: L=13,620 mm, W=2,480 mm, H=3,000 mm * Internal volume*: 101 m³ * Pallet spaces: 34 * Speed curtain, 1 side Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists. We will be happy to advise you.

Condition: new, Grundfos CRN3-19 A-P-G-V-HQQV vertical centrifugal pump, serial number: 0001, with MG90SB2-24FT115-H3 motor / 85U05906, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Ibjdpfx Ajzkxg Isb Isb

Condition: new, maximum load weight: 29,071 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Schmitz SCS 24/L Speed Curtain Ibodjvt Hxnopfx Ab Isb * Load securing: Body certified according to EN 12642 XL * with beverage certificate * with Daimler 9.5 certificate * Spare wheel holder basket design for 2 wheels * Wheelbase 7,700 mm * 1st axle liftable * Schmitz axles with air suspension and disk brakes * Lifting and lowering device * Jost landing gear * LED reversing lights * 6 tires 385/65R22.5 * 30 pairs of lashing eyes in the outer frame * Plastic tool box * Pallet box * 28 mm plate floor * Fire galvanized chassis * Tarpaulin color RAL 9010 pure white For further information please do not hesitate to contact us

Condition: new, Grundfos CRN3-19 A-P-G-V-HQQV / A96516928P11017 vertical centrifugal pump, serial number: 0001, with MG90SB2-24FT115-D1 motor, serial number: 85D05906, unused, 100% functional, scope of delivery as shown in the photos. Iodpfxezknyqj Ab Isbb

Condition: new, maximum load weight: 29,071 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Farikneuer Schmitz SCS 24/L Speed Curtain Expected to be available end of February * Load securing: body certified according to EN 12642 XL * with beverage certificate * with Daimler 9.5 certificate * Spare wheel holder basket version for 2 wheels * Wheelbase 7,700 mm * 1st axle liftable * Schmitz axles with air suspension and disk brakes * Lifting and lowering device * Jost landing gear * LED reversing lights * 6 tires 385/65R22.5 * 30 pairs of lashing eyes in the outer frame * Plastic tool box * Pallet box * 28 mm plate floor * Fire galvanized chassis Ibsdjvw Hkrjpfx Ab Iob * Tarpaulin color RAL 9010 pure white Example pictures For further information please do not hesitate to contact us

Condition: used, empty load weight: 7,143 kg, maximum load weight: 28,857 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 07/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,620 mm, suspension: air, tire size: 445/45 19,5, tire condition: 50 %, color: blue, Year of construction: 2018, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, / Sale / Rental of commercial vehicles Ijdpfozlbhkox Ab Ijbb * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, axle configuration: 2 axles, first registration: 02/2023, next inspection (TÜV): 03/2027, Year of construction: 2023, Load securing: Body certified to EN 12642 XL. Drinks certificate. Daimler 9.5 certificate. 2 identification plates at the rear, 565x200, ECE-R70, vertically on the rear panel. Vehicle complies with EC type approval with Certificate of Conformity (CoC). 1 folding GGVS sign. Front crossmember height 125mm, rear 400+28mm, Smart Generation. Chassis: Standard version. "MODULOS" bolted chassis. E-bike holder, corbel version, screwed for 2 e-bikes, behind the unit. 10-year warranty against rust-through on galvanized parts (see warranty terms). Wheelbase 7700 mm. Axle distance 1310/1310 mm. Outer frame with Speed Curtain on both sides. Underrun protection. Kingpin: 2" according to SAE standard, interchangeable. 1 kingpin position 1690mm. Lateral impact protection in conjunction with a pallet box. Starting aid (liftable front axle), activated by "3x braking". Circular driving with the lifted 1st axle is not possible. Starting aid (liftable front axle), activated by "3x braking". Only permitted for use as a starting aid. Model SCS 24/L - 13.62 E B. Manufacturing date 01.02.2023. Body length 13620 MM. Body width 2480 MM. Front wall height 2400 MM. Body height at the front 2680 MM. Body height 2680 MM. Lateral front passage height 2600 MM. Lateral rear passage height 2600 MM. Total height at the front, unladen 4002 MM. Total height at the rear, unladen 3907 MM. Loading height at the rear, unladen 1197 MM. Tire size 385/65R22.5. Total weight (permissible/technical) 36000/39000 KG. Payload (permissible/technical) 28875/31875 KG. Unit weight (permissible/technical) 24000/27000 KG. Saddle load (permissible/technical) 12000/15000 KG. Tare weight, complete 7125 KG. Fifth wheel height, unladen 1155 MM. Ride height 270 MM. Wheelbase 7700 MM. Rear door height 2648 MM. Rear door width 2480 MM. Brake disc diameter approx. 430mm. ROTOS SCB running gear system (disc brake). Axle SCB 9 t, SP2040, FM1300, ET 120, disc brake 430 mm. Wheel fastening by center centering according to DIN 74 361 part 3. SCB air suspension type: MRH-KM30. Two-circuit compressed air braking system with standard couplings. Steel air tank. EBS 2S/2M with stability program. EBS power supply via ISO 7638 + CAN. Double diaphragm spring accumulator cylinder. Lifting and lowering device with AUTO-RESET function. 2 chock blocks with holder. Support jack, manufacturer "JOST", semi-circular foot with plate, single-sided operation, low maintenance. 1 LED lighting system 24V with multi-chamber light and dynamic turn signal. 2 sockets, 7-pin, 1x DIN ISO3731 / 1x DIN ISO1185 and 1 socket ISO12098. Continuous lamp carrier, color white, with "SCHMITZ" embossing. LED side marker lights coupled with turn signals. 1 pair of LED side marker lights. Without rear warning system / ramp approach aid. Tire brand: SCB ""SELECTION"" Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone. Regional transport tires (M+S). 6 tires 385/65R22.5 (11.75x22.5). Steel wheels, ET 120. Protective caps for wheel nuts. Anti-spray mud flaps with Schmitz logo. Lashing eyes: 30 pairs in the outer frame, 2 tons tensile force per eye, according to EN 12640. Ram protection for running rail, Speed Curtain. Pallet stop, straight on both sides of the outer frame, 19mm high, internal dimension 2460mm. Rubber ram protection at the rear. 2 rubber bumper buffers, vertically on the lamp panel. Pallet box for 24 Euro/16 ISO pallets. Ground clearance of the pallet box 286 MM. Holder for light and brake connection at the front of the headboar Iedpfszg R Hrjx Ab Isbb

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 540029, Heidelberg Speedmaster 70 x 100 cm - 4 colors - Format: 70 x 100 cm - Approximately 400 million impressions - Serial number: 540029 - CP Tronic - CPC 1.04 - Alcolor dampening system - Autoplate Ibjdjzd R Hyepfx Ab Ijb - Preset - Cocking - Fully automatic washing systems - 2/2 reversal (perfector) - Decurler - Powder spray unit

Condition: new, maximum load weight: 32,123 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Schmitz SCS 24/L Speed Curtain * Load securing: Body certified according to EN 12642 XL * with beverage certificate * with Daimler 9.5 certificate * Spare wheel holder basket design for 2 wheels * Wheelbase 7,700 mm * 1st axle liftable * Schmitz axles with air suspension and disk brakes * Lifting and lowering device * Jost landing gear * LED reversing lights * 6 tires 385/65R22.5 * 30 pairs of lashing eyes in the outer frame * Plastic tool box * Pallet box * 28 mm plate floor * Fire galvanized chassis Ibodpfx Aboupb Sdo Iob * Tarpaulin color RAL 9010 pure white For further information please do not hesitate to contact us

Condition: used, maximum load weight: 31,505 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2014, next inspection (TÜV): 03/2027, loading space length: 13,670 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Year of construction: 2014, Equipment: ABS, * NET TOP PRICE * Schmitz Rotos axles with disk brakes * Lift axle * SPEED CURTAIN tarpaulin L+R loading and unloading without stanchions/support slats * Pallet stop L+R * Varios hydraulic lifting roof with pump * Portal doors * Spare wheel holder * Tool box * Lashing eyes * LxWxH: 13.64 x 2.48 x 2.80-3.00 * Unladen weight: 7,295 kg * Tires: 385/55 R22.5 * German vehicle * good condition Ibodpfx Ajvaq N Rob Ijb Subject to errors and prior sale !!! Sale takes place under exclusion of any warranty! - Mi goworim po Russki - We speak english - Mówimy po polsku

Condition: used, empty load weight: 7,400 kg, maximum load weight: 28,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 05/2027, loading space length: 13,631 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, total length: 25,500 mm, total width: 40,000 mm, total height: 1,38,860 mm, suspension: air, tire size: 385/65 R 22.5, Year of construction: 2023, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, emission class: none, Equipment: tail-lift, ABS/EBS, axle manufacturer Schmitz SCB, anti-splash guard, disc brakes, plug-in side boards, 4 rows of aluminum slats, air suspension with lift function, lifting and lowering, Dhollandia tail lift, load capacity 2,000 kg (with battery and charging cable), lift axle on the 1st axle, pallet box for 32 pallets, quick-release fasteners, forklift-compatible, Edscha tarpaulin, 32 lashing points, flexible cargo securing system with 1 crossbar, XL cargo securing certificate according to VDI 2700 + beverage certificate + DaimlerChrysler, 2x 7-pin and 15-pin electrical connectors, document box, tensioning device at the front, customs cord, 2x LED reversing lights, pallet stop left/right, continuous lashing holes in the outer frame, very well maintained!!! Ibodpfx Aez Au Rgob Iob

Condition: used, Year of construction: 2007, 2007 | Holland-Lift Q 135 El 24 (15m) | Used Scissor Lift 📍Location: Estonia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 7000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 26 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Ijdpfxjyailbe Ab Iobb The hourmeter is broken, and the protection plate near the drive motor is bent. The drive motor is in good condition, and all operations work, except the lifting leveling sensor, which occasionally malfunctions. The customer defrosted the remote and charged the batteries before the inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38110 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Ibsdozxgtfepfx Ab Iob Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Condition: used, Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor, overvoltage protection switch, protective plug -Manufacturer: Phoenix Contact, surge protection plug Ovp -Type: PLT-SEC-T3-24-P -Number: 3 pieces available -Price: per piece -Dimensions: 60/17/H45 mm Ibsdpfxjf I Hqfo Ab Isb -Weight: 0.1 kg

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2018, Additional features * Adjustment group for mounting plate size 3 * Adjustment group for hydraulic couplings for Aebi MT/VT * Working width 2.4 m * Hydraulic lifting and swiveling device for adaptation to mounting plates * LED lighting * Kombi 25 wear strips * Side deflectors * Splash guard * Warning flags with plastic pole Other: Iodpeznvt Hofx Ab Iebb * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport and handover. * No liability for printing and typing errors. * Errors, changes and prior sale reserved. * Non-binding offer. * Photos may differ. Price applies to current condition. * All information without guarantee.

Condition: used, driver cabin: other, gearing type: other, Other: Iodszimd Sjpfx Ab Ijbb * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Ibedpfx Asxta U Eob Ijb Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER Ibsdpfx Absx Aqi Es Ijb N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: like new (used), Year of construction: 1999, functionality: fully functional, operating hours: 24 h, total width: 1,000 mm, total height: 2,500 mm, overall weight: 1,200 kg, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Ibedpjurb R Eofx Ab Ijb Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion