Used Philips Industrie / P.millier Lyon Weighbridge for sale (25,984)

Condition: good (used), 2 weighbridges: Philips Industrie 18 m / 3 m, P.Millier Lyon 13 m / 3 m. Price: €2,000 each. Iisdpfx Anoy Av Hlj Dsa

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO - Tungsten carbide saw blade Ø 300mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Iiedpfx Anef Nwxwo Dja

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure Iisdpfxohyuglj An Dja - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop Ijdpfxjpl Tgmo An Dsia - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Year of construction: 2024, condition: new, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Machine in stock and ready for shipping Equipment: - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support Iodpfx Aned Izq Hs Deia - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Year of construction: 2024, condition: new, XX100329 CNC Machining Centre with 3 axes and worktable with pneumatic positioning at 0°/90°/180° FOM INDUSTRIE FMC 120 Machine in stock and ready for shipping Standard configuration: - Servo-ventilated three-phase spindle motor 3 kW, regulation of spindle rpm by numerical control - inverter (1000/17000 rpm) Iodpfx Anshlkqpo Dsia - 6 position tool-holder for manual change with pneumatic locking (ISO 30) - Pneumatic rotation of the work table 0° to 90° to 180° - Mobile control console with PC, 24'' - No.4 pneumatic vices with manual positioning and double pressure with safety valves - Manuallly adjustable profile reference stops on right and left of work table - Minimum quantity lubrication (MQL) with pure oil - Perimeter safety casing on 3 sides and retractable front door - FST CAM 4 program Optional equipment installed on the machine: - PR204851 5-position automatic tool magazine (ISO 30) - PR207680 4-vice Easy-to-Set configuration: • Transformation of standard vices into vices with automatic movement and pneumatic locking • 2 retractable pneumatic side stops • SW for vice positioning - PR-28965 Beam rotation stop for intermediate angles with manual adjustment - PR204833 External stop with tunnel - PR202971 Data import software for data in accordance to FOM protocol with wireless bar-code reader - PR-27602 Tool set for aluminium - QN-28849 ISO 30 cone with milling cutter Ø 75 mm thickness 6 mm for end milling

Condition: new, Year of construction: 2023, Corner crimping machine FOM INDUSTRIE BAIHA L Machine in stock - Max. profile height 200 mm - Hydro-pneumatic drive - Three pneumatic clamps - Min/max height of blade position from 0 to 180 mm - Kit for profile support - Digital counters for profile positioning - No. 2 right tool-holder - No. 2 left tool-holder - No. 2 knives 2 mm thickness - No. 4 tools 5 mm thickness - No. 2 fold-away profile fences Iodpfx Ansd E Eims Doia

Condition: new, Year of construction: 2024, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Iijdjwh Rlgopfx An Dea Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil Iiedpfx Asiv Imnsn Dja - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Year: 2019 Condition: excellent, as new Equipment (standard + options): - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m Iiodpfewk R A Dsx An Dea - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Condition: used, Used DC motor Iisdpfx Anewbhg Us Dsa Anchor 460V // Current 325A field 340V // current 4,7 A Speed 1880rpm Power 138kW

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,286 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 35 m/min, Submitting a bid constitutes an obligation to collect the item on time on 21.04.2026! Within Europe, the disassembly team can also reassemble the system directly at the buyer’s site afterwards (Estimate: approx. 20,000 EUR, approx. 15 working days required). 5-axis simultaneous milling with Heidenhain iTNC 530 control! TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feed rate: 35,000 mm/min MACHINE DETAILS Control manufacturer: Heidenhain iTNC 530 Tool magazine: 40 stations Electrical Data Supply voltage: 400 V AC Frequency: 50 Hz Current consumption: 116 A Total installed power: 69 kW Operating hours Program run time: 23,286 h Machine on hours: 51,450 h Iodpfxeyzrvte An Deia Control on hours: 70,739 h EQUIPMENT Measuring probe Note: Further technical specifications of the machine can be found in the attached data sheet.

Condition: used, tank capacity: 680 l, GENERAL Design: suspended Internal diameter: 850 mm Overall height: 1,550 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 90 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.00 bar Iedpjxqc Rdjfx An Djia Base type: Lugs Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 680 liters Double jacket volume: 55.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,050 mm Last use: chemicals TANK Max. permissible operating temperature: 134 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top cover MATERIAL PROPERTIES Outside surface: ground Inside surface: ground Feet material: stainless steel

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, In January 2025, a new spindle was installed! The machine has been regularly maintained! TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 800 mm Feed rates Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous duty) Vertical: 10,000 rpm Spindle speed S1 (continuous duty) Universal swivel head, 2 axes: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Ijdpfx Aoy Dgyfon Deia Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Current draw: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT DINO series Precision linear guides and ball screws Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Includes documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Interchangeable milling head with 4th/5th axis

Condition: used, Height-adjustable workbench HANDKE Industrial Technology Height-adjustable workstation, work table, electric workbench Table length: 1100 / 1700 mm Table depth: 600 mm Foldable table length: 600 mm Working height: from 830 to 1200 mm - Tabletop coated with melamine resin: 40 mm - Tabletop with hydraulic lift system - Height adjustment via hydraulic pump with hand crank - Sturdy base frame made of aluminium system profile - Mobile with 4 large castor wheels (swivel castors) - Rear panel with standard square perforation - 1 drawer compartment W x D x H = 675 x 210 x 80 mm - 1 cabinet base unit W x D x H = 160 x 580 x 560 mm Overall dimensions L x W x H: 1200 x 660 x 1560 mm Weight: 90 kg Very good condition, as new 2 units available Price per unit Iisdpfxoitv Nvj An Dja

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC530, spindle speed (max.): 18,000 rpm, spindle nose: hsk 63, number of spindles: 30, Equipment: chip conveyor, documentation/manual, FPT vertical machining center model RAID Travels 1500X1100X600 mm 30-position tool changer HSK 63 spindle, 18,000 RPM (overhauled in 2025) Iiodpfsx H Iylsx An Dea CNC HEIDENHAIN iTNC 530 Remote electronic handwheel Chip conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, We offer you: Manufacturer: FPT Model: Spazio 25-L Year of manufacture: 2003 Control: Heidenhain iTNC 426 Technical Data: Travel distances: x-axis: 2,500 mm y-axis: 800 mm z-axis: 1,250 mm Main spindle: Tool holder: ISO 50 Max. spindle speed: 4,000 rpm Work table: Clamping surface: 2,200 x 750 mm Max. table load: 4,000 kg Iodpoyz Adbefx An Deia Technical features: - Automatic universal milling head, 0 and 180 degrees The machine is already dismantled. A video is available on request. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. All technical data and information are subject to change and error. Prior sale reserved!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: GM0619195, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table length: 2,000 mm, table width: 2,500 mm, torque: 1,180 Nm, table load: 30,000 kg, Equipment: documentation/manual, Milling machine Moving column Brand: FPT Model: RONIN EVO C.N.C: HEIDENHAIN TNC640 Rotary-translating table 2000 × 2500 mm, load capacity 30,000 kg, Chain-type tool magazine, 60 tools, ISO 50, Laser tool integrity probe, workpiece alignment measuring probe, Coolant system, Chip conveyor, Anchoring and leveling equipment for X axis 6000 mm, Vibration detection sensor, Double cradle for loading/unloading two milling heads, with dedicated software. TABLE Table dimensions: 2000x2500 mm Table load capacity: 30000 kg TURNING CAPACITY Longitudinal X-travel: 6000 mm Cross Y-travel: 1500 mm Vertical Z-travel: 2500 mm Iiodsyzrb Nspfx An Doa HEAD Motor power: 37 Kw SPECIFIC PROPERTIES Worktable 2500 × 2500 mm, height 300 mm Spindle motor for mechanical heads: 42 kW, torque 1180 Nm, 5000 rpm Automatic head clamping system for mechanical heads + electrospindle heads Universal head with thousandth-degree positioning, 37 kW No. 2 mechanical spindles ISO 50 Spindle extension Ø 200 mm, length 400 mm, 42 kW, 5000 rpm Rigid tapping for mechanical heads (x2) AUTOCAL software for automatic calibration Rotary-translating table with table surface

Condition: used, Year of construction: 2014, In excellent condition, ready to use immediately Iijdpfx Ajywhd Een Doa

Condition: excellent (used), functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, Aluminum profile processing and cutting line – Mutlimandrino /LMT 2P - LH/ Short description: Fast and precise work, thanks to 2 feeding "hands" /grippers/. One - to the milling station /Multimandrino/, the second - to the cutting station, with a 550mm disc. Technical characteristics: - Management and control software – FOMCam - Possibility to enter cutting in .xml format /P2K2/ - Disc 550mm – with electronic positioning - 12 pcs. spindles with a power of 3.3 kW, for work on 4 sides of the profile, including 1 pc. tilting - Maximum profile size – 200 x 200mm - Profile rotation system from 0-90* - Maximum bar length – 7000mm - Working direction – LH /left/ - profiles are fed from the right to the left side - Feeding table with a capacity of 18 bars - Unloading of finished positions – manually - Industrial label printer Iedpfxsv Ucbno An Dsia NOTE: A gift to the Line is an “Automatic warehouse” for finished positions!!! Functional

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Iiedpfoyylikjx An Dja Year: 2002 Carbide blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Roller table for mobile head (3 m) Machine in working condition.

Condition: new, 🧰 Product Features • Condition: new • Colour: grey • Volume: 650 l • Load capacity: 4000 kg (at 5°C ambient temperature) • Dead weight: 43 kg • Length: 120 cm • Width: 100 cm • Height: 78 cm • Stackable: Yes • Dimensionally stable: Yes • Special features: suitable for racking storage, liquid-tight, optional drain valve 💰 Price €155 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Iijdpfjhvrk Tjx An Doa Always over 5000 linear metres of pallet racking from numerous manufacturers in stock (Specifications, information and prices subject to change and errors excepted. Intermediate sale reserved! Please see our T&Cs. All prices excl. VAT, ex warehouse.)

Condition: new, functionality: fully functional, Good day, We are pleased to offer you, subject to prior sale, new and originally packaged Philips LED street lights of the type BGP307 LED120-4S/740 l DM11 48/76S. Iiodeyzr Tlspfx An Dsa Here are some technical specifications: Manufacturer: Philips Product family: ClearWay gen 2 Type: BGP307 LED120-4S/740 l DM11 48/76S System luminous flux: 10,200 lm Rated luminous efficacy: 142 lm/W System power: 72 W Light color: 740 neutral white Color temperature: 4000 K Optics: Medium light distribution type 11 Beam angle: 160° – 42° x 54° Input voltage: 220 to 240 V Input frequency: 50 to 60 Hz Inrush current: 47 A Dimensions: 330 x 525 x 110 mm (W x L x H) Tube diameter: 76 mm Weight: approx. 6.13 kg Protection rating: IP66 For further technical information, please refer to the manufacturer's PDF product data sheet and PDF installation manual, both available for download. Application areas, suitable for lighting: - Public facilities, sports grounds, open areas, street lighting - Company premises, industrial sites, loading zones, transshipment areas - Warehouse, hall, and logistics lighting, etc. Mounting type: Suitable for pole mounting with a diameter of 48 – 76 mm. We would be pleased if these LED lamps are of interest to you. Your service team, Mertens & Frowein GmbH

Condition: new, functionality: fully functional, overall weight: 8 kg, total length: 486 mm, total width: 389 mm, input voltage: 220 V, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP66, Good day, We are pleased to offer you, without obligation, brand new, original packaged Philips LED luminaires of the type BVP130 LED210-4S/740 PSU S ALU C1KC3, from the CoreLine Tempo Large product family. Here are some technical specifications: Manufacturer: Philips Product family: CoreLine Tempo Large Type: BVP130 LED210-4S/740 PSU S ALU C1KC3 System luminous flux: 21,000 lm System power: 164 W Light color: 740 neutral white Optics: Symmetrical Beam angle: 70° x 21° Input voltage: 220 to 240 V Input frequency: 50 to 60 Hz Dimensions: 389 x 486 x 40 mm (W x H x D) Weight: approx. 7.5 kg Protection class: IP66 Iijdpsyzq Ubofx An Dja For further technical details, please refer to the manufacturer’s PDF product data sheet and PDF installation instructions available for download. Application areas, lighting for: - Public facilities, sports complexes, open areas, street lighting - Industrial sites, company premises, loading zones, transshipment areas - Building facades, billboards - Warehouse, hall, and logistics lighting, etc. Mounting options: Suitable for surface, wall, truss, and pedestal/floor mounting We would be delighted if these LED luminaires are of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 35 m/min, spindle speed (max.): 5,000 rpm, table width: 2,000 mm, table load: 15,000 kg, table length: 2,000 mm, CNC HEIDENHAIN ITNC530 HSCI ANNO 2016 Longitudinal X-travel: 6000 mm Cross Y-travel: 1250 mm Vertical Z-travel: 2000 mm Rapid feedrates: 35 mt./min. Semi-automatic accessory change Spindle motor power: 34 kW Constant power speed range: 400 – 5000 rpm Maximum torque: 830 Nm Maximum feed rate: 35,000 mm/min Acceleration: 1.5 m/s² Iiodjyugbiopfx An Dsa Maximum spindle speed: 5000 rpm Hydrostatic rotary-translating table TRT15 Table size: 2000 × 2000 mm (15.000 KG) Universal bi-rotary head with thousandth-degree positioning Taper: BT 50 Double cradle for loading/unloading two milling heads, with dedicated management software Chain-type tool magazine, 40 positions, ISO 50 High-pressure coolant system, external/internal through the tool, with paper filter External pressure: 4 bar Internal pressure: 20 bar Through-tool compressed air coolant Chip conveyor with right-side discharge Remote control panel