Used Pht Artikel Nr.: 2213401 for sale (1,869)

Year of construction: 1994, condition: good (used), multi-function punch, punch, hole punch, pneumatic hole punch -Article number: 296 346 -Dimensions: 800/400/H1200 mm Bljdpfx Afevmq Utj Asn -Weight: 170 kg

Condition: excellent (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Bedpjb A Hl Rofx Af Ajln Article No.: 296 566 -Weight: 170 kg

Condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated Blodsn Sru Hopfx Af Aen

Condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 180 kg Blsdpeb A I H Rjfx Af Aen

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: Bsdpjzw Apgjfx Af Asln We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Blsdpfxez Duhxs Af Aen Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Year of construction: 2022, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Gogeim TA08 Nr 1400, Gogeim TA 08 shot blasting machine #1400. Completely overhauled in 2022, including replacement of the metal belt, impeller, loading mechanism, shot feed hoppers, power panel, and air cleaning unit. Operational time was less than one year. Bodpfx Aezy U Eljf Ajln

Condition: used, Karton Former for Karton Sheets 6x0.7l inside Bsdpoz Ibgcjfx Af Asln

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. Bsdpfx Asyxhp Djf Ajln The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: excellent (used), Year of construction: 2006, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 5648400, fuel: liquefied natural gas (LNG), FOR SALE – WEISHAUPT G60/2-A ZM-NR Industrial Gas Burner – 6.1 MW Weishaupt G60/2-A ZM-NR industrial gas burner, manufactured in 2006, complete with gas train/rail and control cabinet. Professional heavy-duty industrial burner suitable for large boilers, steam boilers, thermal oil systems, dryers and other high-capacity industrial heating applications. Technical specifications Manufacturer: Weishaupt / Max Weishaupt GmbH, Germany Model: G60/2-A Version: ZM-NR Year of manufacture: 2006 Serial / factory no.: 5648400 Fuel: Natural gas Burner capacity: 800 – 6,100 kW Minimum gas connection pressure: 100 mbar Maximum gas connection pressure: 4,000 mbar NOx class: 2 Electrical supply: 380 V / 3 phase / 50 Hz Electrical power: 16.59 kW Protection rating: IP40 Manufactured in Germany CE marked Included in the sale Operating hours caa. 20,000 hours Complete burner package including: Weishaupt G60/2-A ZM-NR burner Gas train / gas rail Control cabinet Burner control and electrical components Associated fittings/components visible with the burner The burner is currently installed on an industrial boiler and can be inspected in its installed condition. Condition Used industrial equipment in good overall physical condition considering its age. The burner has been installed in an industrial application and is being removed as part of a system replacement. Inspection is welcome before purchase. The buyer is welcome to inspect the equipment and verify the technical condition and included components before removal. Removal / transport The burner is dismantled for transport. Loading and transport can be arranged by agreement. International buyers and export inquiries are welcome. price 8500 + VAT Price negotiable for serious buyers. Located in Slovenia, EU. Weishaupt G60/2-A ZM-NR industrial gas burner, built in 2006, complete with gas extractor and control cabinet. Professional high-performance industrial burner suitable for large boilers, steam boilers, thermal oil systems, dryers and other high-performance industrial heating applications. Technical data Manufacturer: Weishaupt / Max Weishaupt GmbH, Germany Model: G60/2-A Version: ZM-NR Year of manufacture: 2006 Serial/factory no.: 5648400 Fuel: Natural gas Burner power: 800 – 6,100 kW Minimum connection pressure: 100 mbar Maximum connection pressure: 4,000 mbar NOx class: 2 Power supply: 380 V / 3-phase / 50 Hz Electrical power: 16.59 kW Protection class: IP40 Made in Germany CE marking Scope of delivery: Operating hours approach. 20,000 operating hours Complete burner package included: Weishaupt G60/2-A ZM-NR burner gas pipeline control cabinet Burner control and electrical components Associated fittings/components (visible on burner) The burner is currently installed on an industrial boiler and can be viewed when installed. Used industrial plant in good condition, appropriate to its age. The burner was used in an industrial application and is being dismantled as part of a system renewal. Viewing requested before purchase. The buyer can inspect the plant before dismantling and check the technical condition and the components included. The burner is dismantled for transport. Loading and transport can be arranged by arrangement. International buyers and export requests are welcome. Bjdpszx R U Tofx Af Aoln 8500 € + VAT Price negotiable for serious prospects. Location: Slovenia, EU.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. Bjdpfxow U A Sks Af Ajln -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Voltage : 380-400V Geared Motors : 2 x 11kW Sew Eurodrive Infeed Rollers : 9 Pcs Feeding : Horizontal Drive : By Belt

Condition: new, Year of construction: 2023, functionality: unexamined, Equipment: CE marking, New, high capacity, Pallmann chipping line for sale. Specification: Cross feeding chain conveyor; Bljdpfxsw Uqqno Af Ajn Inclined separator, reversible; Longitudinal chain conveyor, reversible incl; Cleaning roller conveyor; Flat belt conveyor with metal-free zone, reversible; Metal detector; Crane for contaminated material; Vibratory feeding table; Drum chipper „ORIGINAL PALLMANN“, type PHT 850 x 1250 with mechanical clamping system (3 knives-rotor); Auxiliary exhaust system; Trough belt conveyor for bark; Scraper conveyor; Double screw conveyor; Trough chain conveyor, type Z-1600/2; Electric design & automation.

Condition: used, mileage: 25,000 km, power: 103 kW (140.04 HP), first registration: 09/2025, fuel type: diesel, next inspection (TÜV): 09/2028, color: white, gearing type: mechanical, number of seats: 9, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, 1 x Opel Movano, white, L 3 2 x Opel L 3, tenorit grey metallic 2 x Fiat Ducato L 3 - Flexible floor with 6 airline tracks - 7 individual seats in the passenger compartment, adjustable backwards by GRL, with armrests on the left and right, magazine net, and Isofix Blodpfx Ajz Ii Disf Ajn - Wheelchair space registered - Original driver and passenger seats, providing a total capacity of 9 passengers Lettering and design applied. Base vehicle with air conditioning, PDC (Park Distance Control) with rearview camera, radio with hands-free system, multi-function steering wheel, etc. H3 Wheelbase 4035 mm Overall length 5993 mm Height 2522 mm Width 2050 mm Permissible total weight 3500 kg !! Special equipment: Airbag, driver/passenger side, Cool & Sound package, Electrical interface for additional modifications, Driver assistance system: ParkPilot system with rearview camera, Light package 1, Tire repair kit, Seats in the cab: Adjustable passenger single seat, Seats in the cab: Heated driver's seat Additional equipment: Exterior mirrors, Single tires on the 2nd axle / rear axle, Driver assistance system: Side wind assist, Generator 185 A, Rear wing doors with glazing (opening angle 180 degrees), High roof H2, Permissible total weight 3.50 t, Body/structure: High-roof van, Body variant: Vehicle length L3 (2x available), Body variant: High roof (H2), Fuel tank: 80 L, Steering column (steering wheel) adjustable, Headlight range adjustment, Model update, Engine 2.3 L - 103kW CDTI, Pollen filter, Long wheelbase, Low emissions according to emission standard Euro 6e-TEMP, Sliding door, cargo/passenger compartment, right, Visibility package, Steel rims 6.5x16, Daytime running lights LED, Permissible total weight 3.5t Net export possible All information without guarantee These are German vehicles / no re-imports. Custom orders (new vehicles) also possible for Citroen/Peugeot/Fiat Ducato or Opel Movano. We offer worldwide shipping.

Condition: used, Year of construction: 2005, Pneumatic Press Tox Inventory No. 3941 Power Pack Press Tox Pressotechnik Blodpfx Afozzrugj Aon Type Stiskalnika 12050052 Year of Manufacture 2005 Type BS 15.30.100.06 No. 800322.35 * Two-hand control STE 003-03- 1/2" * Pressure force kN * Working stroke mm * Power stroke mm * Reach approx. 220 mm * Table size 450 x 400 mm * Installation height approx. 265 mm * 2 manual controls * Air inlet bar * Electrical connection 230 V * Space requirement: approx. W 700 x H 2050 x D 1050 mm * Weight approx. 500 kg

Condition: good (used), functionality: fully functional, Type 4 Technical data : Center width approx. 400 mm Bsdpfx Afjzt Syts Ajln Center height above bed 120 mm 24 speeds from 71 - 2240 rpm Drive power 0.6 / 0.8 kW Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: System-S/N: H 01 07 000-1 / Motor-S/N: 0141708310002, overall weight: 1,200 kg, The Pregler hydraulic power unit is a reliable and high-performance solution for supplying hydraulic systems in a wide range of industrial applications. It combines high-quality components in a robust housing to ensure stable pressure supply and efficient operation. The unit is versatile and can be easily integrated into existing installations, while its durable construction ensures long service life. Bedpfx Afewtgwij Aoln

Condition: used, Year of construction: 2019, MAXIMUM CHIPPER DIAMETER: 250 MM ENGINE POWER: 75 kW GRINDING DRUM WIDTH: 640 MM GRINDING ROLLER DIAMETER: 660 MM UPPER ROLLER WIDTH: 640 MM MAXIMUM OPENING OF UPPER ROLLER: 600 MM KNIVES ON MACHINE: 3 Bljdpfx Afeyffi Tj Aon FEED ROLLERS: 2

Year of construction: 2015, condition: good (used), Jocar Log Carriages, strong band line set consisting of: entrance transfer, half moons,Log Carriages whith Three fixed Headblocks model 30P900/SM/NR, mounted on a mechanical structure, desk with Mudata positioning system, all inside a closed cabin, exit roller train , Jocar band saw device model 1250/165/NR, with a diameter of 1250mm flywheels, bicut, the input transfer is 4 chains 12000mm long, the carriage is 3 towers ideal for wood cuts 1000mm minimum, since the distance It is from the first to the second 750mm and from the second to the third 1350mm, max length 3 meters, all Jocar machinery from the year 2015 Bedpfx Ajlzgncef Aoln

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,300 mm, total width: 1,400 mm, total height: 2,000 mm, Lithographic press, also known as a scraper press, for manual printing from lithographic stones. Used by artists for lithography, in schools, art academies, and museums. The machine was last used in the workshop of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 80 x 130cm. Also very interesting as an exhibit in a lobby, restaurant, etc., or for production. Many squeegees in various widths are included as accessories, as well as 4 different hand rollers with leather coverings for inking the stones. Bledsx A H I Dspfx Af Asn The wooden table needs minor restoration. Lithographic stones in various formats can also be supplied.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Fan RW No. 2 Volume m³/h: 7,120 Drive kW: 7.5 / V400 / Hz50 Pressure Pa: 1,977 Inlet diameter: 295 mm Outlet diameter: 300 mm Open impeller Bedpfxewu A H Nj Af Aoln New V-belts New bearings

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Blsdpozc D Dkefx Af Aen Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, color: white, gearing type: mechanical, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Opel Movano L4 H2, also available on request as L3 H2 (length 6300 mm / wheelbase 4005 mm), identical to the Fiat Ducato. Order vehicle / base vehicles usually in stock. - Acoustic and thermal insulation from the passenger compartment - 8 airline tracks in the passenger compartment - 7 individual seats with armrests, adjustable backwards, with armrests on the left and right - Isofix on all passenger seats - Storage nets - Original driver and passenger seats (total 9 seats) - Convector heater in the passenger compartment - Air conditioning (with second compressor) in the passenger compartment = dual-zone climate control with service kits - Electric step - Optional free electric door drive Bljdpfxsz Ii Egj Af Asn - Dark / black tinted glazing all around - Multi-stage night lighting - Roof hatch - Registered wheelchair space Optional wheelchair ramp / lift and/or swivel seats Special equipment: Spare wheel with road tires, seats in the driver's cab: adjustable passenger single seat Additional equipment: Airbag passenger side, airbag driver side, audio system: digital audio system (DAB) with 5" color display and Bluetooth hands-free system, exterior mirrors electrically adjustable, right, black box (Event Data Recorder, EDR), on-board computer, roof antenna digital (short), parking assistance system rear acoustic, driver assistance system: intelligent speed assistant, driver assistance system: drowsiness detection sensor, driver assistance system: emergency brake assist with pedestrian and cyclist detection, driver assistance system: lane keeping assist (with lane departure warning), driver assistance system: traffic sign recognition, rear suspension reinforced, generator 180 A, speed control system (cruise control) incl. speed limiter, cup holders in front and storage space, rear hinged doors glazed (opening angle 180 degrees), body/superstructure: high-roof van (standard), fuel tank: 90 liters, radiator grille painted, model refinement, engine 2.2 liters - 132 kW Blue-HDI FAP CAT, wheelbase 4035 mm, low emissions according to emission standard Euro 6e, sliding door cargo/passenger compartment right, power steering electronically controlled, seat cover / upholstery: fabric, lining in the cargo/passenger compartment: incl. roof, permissible total weight 3.5 t Net export possible. We make shipment worldwide.

Condition: good (used), Year of construction: 2004, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 80 mm, injection pressure: 2,500 bar, For sale: Injection moulding machine Arburg 820S 4000-2100, serial no. 195746. The item is in good condition. Technical specifications: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820×820 mm Platen size: 1171×1171 mm Maximum mould height: 850 mm Maximum opening stroke: 700 mm Maximum distance between platens: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Maximum weight of moving mould half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzles Bsdpfxexxi Nvj Af Aeln Net weight of machine: 22,700 kg Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Auto mode: 58,556 Transport and loading can be organised Europe-wide on request, at an additional cost. Prices excl. VAT Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase & sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing business? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Bedpfx Afjzc D Dqo Ajln Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Blodpfxeya Dage Af Ajn Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.