Used Premixer for sale (28)

Condition: used, Year of construction: 1969, Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data - Capacity: approx. 15,000 L/h - Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) - Configuration: Multi-tank system (product tank, vacuum tank, saturator) - Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) - CO₂ content: approx. 6.5 – 7 g/l - Electrical: 380 V, 3-phase - Drive power: approx. 5.5 – 7.5 kW Ledpfoz I R N Hex Akmsru Scope of Delivery  - Premix beverage mixer | Stork Jansen & Sutorius N.V. | 1969 / 2020 | Multi-tank system with carbonation unit - Plate heat exchanger | Alfa Laval  - Pump unit | Siemens | With motor - Control system | Kinco | HMI touchscreen - Frequency converter 

Condition: used, Year of construction: 2016, For Sale: Complete TU premix bunker installation with accessories. Included: - 5 premix bunkers, micro-dosing system, dosing system 1400 liters per storage tank - 1 micro-dosing system with 5 storage tanks - dust extraction system - other components from Technology Unlimited It has been disassembled, but it is possible to view a similar, operational installation at our location. Lrjdszlt S Ispfx Akmsu The installation can be viewed on-site.

Condition: like new (used), Demaco Gen III premixer, Pasta technology Pre-mixer Completely finished with stainless steel 316, sanitary grade Excluding electric motor Documentation available (including data for the electric motor) See our other listings Lrsdpjwyfyvjfx Akmeu VMA Wekerom

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Ledpfx Akox T Aqfemjru Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Condition: used, Year of construction: 1998, machine/vehicle number: PX15, Used Premix PARMATEC Drinkmix 12000 l/h The Used Premix PARMATEC Drinkmix 12000 l/h, which PARMATEC manufactured in 1998, delivers high-performance beverage preparation. This machine precisely mixes water, syrup, and CO₂ to produce a final product with excellent stability. Furthermore, its modular configuration and advanced process control make it highly suitable for medium and large-scale production lines. Technical Features Model: Drinkmix 12000 l/h Manufacturer: PARMATEC Year of manufacture: 1998 Processing capacity: 12,000 liters per hour Main components: Base structure provides support and ensures machine stability. Water tank stores water for mixing. Syrup tank holds syrup for blending with water. Circulation pump moves the product continuously through the process line. Carbonation and mixing unit injects CO₂ and ensures complete homogenization. Storage tank stabilizes the mixed product before filling. Sanitizing transfer pump moves the sanitizing solution efficiently. Control panel houses all operational and monitoring controls. Work Cycle of the Used Premix PARMATEC Drinkmix The Used Premix PARMATEC Drinkmix 12000 l/h follows a structured four-step process that ensures accurate proportioning and thorough mixing of ingredients. Ljdpfsv Ai Hyox Akmeru DeaerationFirst, the system removes oxygen from the water to facilitate carbonation. It does this by injecting a precise amount of CO₂ before the water enters the main tank. Additionally, a specially designed nozzle creates a “rain effect” that enhances oxygen separation. As a result, the system achieves optimal preparation for the next stage. DosingNext, the deaerated water and syrup pass through micrometric valves that regulate their flow with exceptional accuracy. Moreover, the machine displays these flow rates on dedicated graduated indicators, allowing operators to monitor the process in real time. This phase ensures that the final premix meets the beverage’s exact specifications. Final Carbonation and MixingAt this stage, the system injects carbon dioxide in the first section of the heat exchanger coil. Then, a micrometric valve controls the amount of CO₂ while a flow meter displays the exac...

Condition: used, Year of construction: 1980, Premixer, manufacturer Famix Falterbaum, capacity 5,000 l/h, 2-component: syrup + water + CO2, with 2 stainless steel tanks, dosing pump from Bran&Luebbe + 2 additional pumps, with fine filter, control cabinet, all mounted on a base frame. L: 1,500 mm, W: 1,300 mm, H: 2,200 mm. Lodpjyzhxqsfx Akmsru

Condition: used, Year of construction: 2000, Overview Ljdpfx Aozcgabjkmeru This FAMIX-Falterbaum 20000TD premix system, manufactured in 2000, is a fully automatic beverage mixing and carbonation system designed for continuous dosing, mixing, deaeration and carbonation of beverage components before filling. The system is suitable for the production of mixed and carbonated beverages using components such as water, syrup and CO₂. It is built as a compact stainless steel skid with integrated tanks, pumps, valves, piping, instrumentation and control cabinet. The premix unit has a capacity of approx. 22,000 l/h and includes two vertical stainless steel pressure vessels, which can be used for product deaeration, buffering and carbonation. The liquid flow is controlled via automated pneumatic valves and a manual stainless steel pipe connection panel, allowing flexible routing for production and CIP operation. The machine is operated via an integrated FAMIX control cabinet mounted directly on the skid. Inline measuring technology is installed in the stainless steel piping for process monitoring, such as Brix, flow or density control. The system is suitable for beverage producers requiring precise continuous beverage preparation ahead of the filling process. Technical Data - Manufacturer: H. Falterbaum FAMIX-Maschinenbau GmbH - Model / Type: 20000TD - Machine Type: Premix / beverage mixing and carbonation system - Year of Manufacture: 2000 - Capacity: approx. 22,000 l/h - Application: Continuous mixing, dosing, deaeration and carbonation of beverages - Product Components: Water, syrup, CO₂ and beverage components - System Design: Compact stainless steel skid with integrated piping and process equipment - Process Functions: Product deaeration, buffering and carbonation - Construction: Stainless steel frame, tanks and piping - Condition: Used, installed in industrial beverage production environment

Condition: good (used), Premixer, manufacturer Falterbaum, type: Famix 3000, for 3,000 l/h, 2-component (water + syrup + CO2), with 2 stainless steel tanks, dosing pump and 2 additional pumps, with control cabinet, mounted on base frame. Dimensions: L: 1,400 mm, W: 1,100 mm, H: 2,200 mm. Lrodpfx Asyzgatskmsu

Condition: good (used), Year of construction: 1997, USED, IN GOOD CONDITION. Lrjdpfx Ajzdiqlokmou

Condition: used, Year of construction: 1995, Premixer, manufacturer Famix Falterbaum, for 30,000 l/h, with 2 stainless steel tanks, dosing pump by Bran&Luebbe plus 2 additional pumps, control cabinet, IDM retrofitted in 2011, all mounted on base frame, Lredpfoyzhzrox Akmju

Condition: used, Year of construction: 2006, machine/vehicle number: M324, Used SACMI VOLOMAS 3S10020 filling triblockTechnical Specifications & Performance DataThis rotary isobaric filling monoblock is engineered for high-speed PET bottle applications in beverage production and industrial packaging. Designed and manufactured by Sacmi, it combines precise filling with integrated capping to deliver reliable performance in a used bottling line or second hand packaging environment. With neck-handling transfer and CO2 capability, it is suitable for both still and carbonated products, including soft drinks.Production speed: up to 40,000 bottles per hourCurrent bottle format: 1.0LContainer type: PET bottles, neck-handling transferFiller valves: 100Capper heads: 20Machine type: Rotary, counterclockwise rotationCO2 capability: Yes (isobaric filling for carbonated products)Maximum container height: 350 mmMachine pitch: 113.1 mmOverall dimensions (mm): 8,964 x 6,663Electrical supply: 400V, 3Ph + Earth, 50 HzInstalled power: 25 kWWorking pressure: 6 barModel code: VOLOMAS 3S/100/20Advanced Automation & Control SystemsThe monoblock integrates robust automation for stable, repeatable operations and quick format handling. Operator-friendly controls and diagnostics streamline changeovers and daily production tasks.Control system: PLC and HMI by leading industrial automation platformsAutomation: Fully integrated monoblock with synchronized filling and capping turretsQuick change: Neck-handling design to minimize mechanical adjustments between formatsElectrical specs: 400V, 50 Hz, 25 kWOperator protection: Enclosed guardings with interlocks and emergency stopsProduction Line Integration CapabilitiesOptimized for in-line operation within complete bottling lines, this monoblock interfaces seamlessly with upstream and downstream equipment in beverage production and industrial packaging environments.Integration: Compatible with conveyors, premix/carbonation systems, and downstream labeling/packagingOperation modes: In-line with synchronized transfer at the neckFlexibility: Suited for PET bottle ranges including typical sizes such as 0.5L and 1.0LAccessories included: Cap elevator, premix interface, and CIP connectionMachine Condition & Maintenance HistoryThis second hand filling monoblock is presented refurbished and guaranteed, ready for operation with compatible spare parts. It is configured for 1.0L PET and is prepared for rapid commissioning within a used bottling line.Status: Ready for operationCondition: Refurbished and guaranteedSpare parts: Delivered with c... Lrodpfx Ae Adyy Hekmou

Condition: used, Premixer, manufacturer: Falterbaum, model: Famix, 4,000 l/h, 2-component: with 2 stainless steel tanks, dosing pump and vacuum pump, mounted on a stainless steel base frame. Lodoyzhwgepfx Akmoru

Condition: ready for operation (used), Year of construction: 2014, operating hours: 35,000 h, laser power: 6,000 W, travel distance X-axis: 4,090 mm, overall weight: 24,500 kg, total width: 7,700 mm, total height: 2,400 mm, product length (max.): 15,000 mm, number of axes: 3, CO2 laser cutting machine manufactured in 2014. This Bystronic ByAutonom 4020 features a powerful ByLaser 6000 with a cutting range of 4090 mm x 2060 mm x 80 mm. It has a maximum workpiece weight of 1580 kg and can handle sheet thicknesses of up to 25 mm for steel and stainless steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic ByAutonom 4020 machine we have for sale. Contact us for further details. - Cutting Range X-axis: 4,090 mm- Nominal Sheet Size X-axis: 4,000 mm- Cutting Range Y-axis: 2,060 mm- Cutting Range Z-axis: 80 mm- Max. Positioning Speed Parallel X/Y: 120 m/min- Max. Positioning Speed Simultaneous: 169 m/min- Max. Axis Acceleration: 30 m/s²- Cutting Hours: Approx. 14,500 hours- Overall System Length (L): Approx. 15,000 mm- Overall System Width (W): Approx. 7,700 mm- Overall System Height (H): Approx. 2,400 mm- Max. Workpiece Weight: 1,580 kg- Max. Sheet Thickness Steel: 25 mm- Max. Sheet Thickness Stainless Steel: 25 mm- Max. Sheet Thickness Aluminium: 15 mm- Wavelength: 10.6 µm- Laser Source Weight: 2,050 kg- Laser Source Dimensions (L x W x H): 2,850 mm x 1,150 mm x 2,100 mm- Table Exchange Time: 35 s- Cutting Lenses / Focal Lengths: 5", 7.5", 9"- Total Power Consumption (with extraction, chiller): 78 kW- Electrical Connection Machine: 3x400V / 3x480V, 50/60 Hz, Max. Power 73 kVA (125 AT)- Chiller Unit: ef cooling WKL560 (Refrigerant R407c, 18 kg, 3x400/480V, 40 kVA, Weight 1,050 kg, Dimensions 2,550 x 1,000 x 2,000 mm)- Laser Gas (Premix): He/N2/CO2, Normalmix consumption 12 Nl/h, Fastmix consumption 120 Nl/h- Cutting Gas: Oxygen (12 bar) / Nitrogen (25 bar)- Compressed Air: 9 bar dynamic, max. consumption 4.5 Nm³/h (machine) + 3 Nm³/h (dust collector) Ledpfjz Nh Sijx Akmsru

Year of construction: 2006, condition: used, machine/vehicle number: PX20, Used KHS INNOPRO CMX-18 mixer 18 m³-h - Year 2006Technical Specifications & Performance DataThe KHS INNOPRO CMX-18 is a premix mixer designed for beverage production and integration into an industrial packaging or used bottling line. Manufactured in 2006, this process unit has a nominal capacity of 18 m³/h and is engineered to prepare, deaerate, mix and transfer beverage product toward the filling area.Manufacturer: KHSModel: INNOPRO CMX-18Manufacturing year: 2006Nominal capacity: 18 m³/hBuffer tank capacity: 850 LMaximum pressure: 8 barTest pressure: 11.44 barTemperature range: 20 / 100 °CAdvanced Automation & Control SystemsThe premix system includes process instrumentation for pressure, flow and level monitoring. Flow transmitters, flow-indicating controllers, pressure indicators, pressure alarms, pressure switches, level switches and level alarms support controlled product handling through the deaeration, transfer and buffer stages.Control air is supplied at 4–5 bar, with an associated gas or air line indicated at 6–6.5 bar. The process arrangement includes controlled flow sections and valve manifolds for product routing, CIP circulation and syrup-return functions.Production Line Integration CapabilitiesThis KHS premix mixer is suited to installation upstream of a filler in a beverage production line. The process schematic shows a dedicated outlet connection to the filler, allowing the prepared product to be transferred from the buffer tank to downstream filling equipment.Water and CIP connections are integrated into the valve manifold, while dedicated CIP syrup-return branches support cleaning and product-return operations. The system uses carbon dioxide supply connections for deaeration and beverage preparation, making it appropriate for production environments where controlled mixing and gas management are required.Water connection: Ø2.1/2"CIP connection: Ø2.1/2"CIP syrup-return connections: Ø1.1/2"Filler outlet connection: Ø4"Sealing-water connection: DN15Machine Condition & Maintenance HistoryThis second hand KHS premix mixer was manufactured in 2006. The available technical documentation identifies the process configuration, vessel ratings, utility connections and instrumentation layout. The equipment is configured as a complete mixing and transfer unit with deaeration, buffer storage, pumps and process-control instruments.Operational Performance & VersatilityThe INNOPRO CMX-18 incorporates a deaeration vessel, buffer tank, six pumps and a product-transfer circuit. Product passes through controlled flow sections before entering the buffer tank and being pumped toward the filler. Carbon dioxide connections, deaeration capability and a dedicated buffer stage support stable product preparation before packaging.The integrated CIP and syrup-return manifold enables cleaning circulation through the process circuit. This configuration is valuable for beverage production operations requiring hygienic product changeover and e... Lredj Adtqropfx Akmeu

Condition: used, Year of construction: 2014, functionality: fully functional, pressure: 8 bar, temperature: 20 °C, type of input current: three-phase, input voltage: 400 V, overall weight: 1,250 kg, usable tank capacity: 90 l, rotational speed (max.): 758 rpm, Equipment: rotational speed infinitely variable, We are offering this used RESPECTA DB13A/20-30L mixing and stirring unit, year of manufacture 2014. Manufacturer: RESPECTA Model: DB13A/20-30L Year: 2014 Condition: used Machine type: Mixing and Stirring Unit Weight: 1,250 kg Voltage: 400 V Frequency: 50 Hz CE safety standards The machine is in perfect working condition. This machine can also be purchased together with other units for a complete production line. Technical Details - Mixing Unit: The mixing unit is designed for blending dry fillers with liquids. Maximum filler particle size: 2mm Mixture output rate: approx. 20 – 30 l/min Mixing tool: single-flight mixing screw, left-handed, equipped with wear-protection coating, robust cylinder design with high surface hardness Drive: 3-phase motor, 4 kW – 379 rpm, 400V / 50 Hz Speed range: adjustable from 0 to 758 rpm Screw overload protection: set at 80% of the rated current Quantity adjustment: potentiometer, stepless, without altering the mixing recipe Technical Details - Binder Premixer: Dynamic mixing of pure liquids without any solid content. Mixing performance: max. 5 l/min Mixing tool: single-flight mixing screw, left-handed System materials: stainless steel, Viton, PTFE Drive: three-phase motor, 0.55 kW, 2830 rpm, 230-400 V / 50 Hz Pressure monitoring: S-11 pressure transmitter, 0-4 bar G ½" Pressure display: control terminal at switch cabinet Technical Details - Filler Dosing System: Four dosing systems for volumetric dosing of free-flowing, non-bridging dry fillers. The dosing units are interchangeable with identical units and secured with quick-release clamps. All dosing units are equipped with level sensors. For fine fillers, a horizontal agitator is integrated in dosing unit 2 to prevent bridge formation as much as possible. Fillers with max. grain size 2mm Dosing rate: approx. 2 – 10 l/min Dosing tool: single-flight spiral, left-handed Dosing drive: geared motor, 0.75 kW – 91 rpm, 230-400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 182 rpm Quantity adjustment and display: control terminal at switch cabinet Storage vessel Capacity: approx. 90 l (4x) Technical Details - Resin Dosing System: Pump unit for volumetric dosing of pure liquids without admixtures of solid or reactive substances. Dosing rate: approx. 400 – 2000 ml/min Viscosity at 20°C: approx. 2,000 mPas Pump type: gear pump Pump pressure: max. permitted 8 bar Drive: three-phase geared motor, 0.37 kW – 291 rpm, 230–400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 582 rpm Quantity adjustment and display: control terminal at switch cabinet Dismantling and removal at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or give us a call. Lrsdpeyxg Dgefx Akmsu

Condition: ready for operation (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm Ljdpevw Urwefx Akmeru - Fine chippings 2-4mm - Chippings 4-8mm - Premix chippings/sand - Play sand 0-2mm - Washed sand 0-4mm - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Year of construction: 2015, condition: excellent (used), Complete line for producing sugar syrup. Batch cooker with steam connection Including a storage tank Additional storage tank Terlet - Mondotherm scraped heat exchanger DTE cooler for cooling Mondotherm - Terlet Lredpszpg Rxofx Akmou Additional premixer for Fatcream

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated Lrjdpfx Ajza Tx Sekmeu - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Lrodpfxszdrufj Akmju

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Labelling Machine – ANKER Roland 8/3 For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Lodpfsz Ri Riex Akmeru Steam-heated for filler CIP, with disk change system, Year: 2012.

Condition: used, machine/vehicle number: LC680, Used KRONES Gera Returnable Glass Bottling Line, 20000 BPHTechnical Specifications & Performance DataThis used bottling line is a complete returnable glass bottling line designed for handling bottles in crates, covering the process from crate preparation through filling, labeling, inspection, crate packing and palletizing. The line combines equipment from Krones, Kettner, Rink, Syscona, Matec, Falterbaum and Bohrer.Filler capacity: 20,000 bphFilling type: isobaric filling (counter-pressure) - ( Heineken-style)Premix capacity: 22,000 L/hContainer formats: 0.33L and 0.75L returnable glass bottlesPackaging configuration: bottles in cratesClosure type: plastic screw caps Labeling technology: wet-glue labeling with 2 aggregatesMain equipment years: 1996–2016Advanced Automation & Control SystemsThe line includes automated systems for crate sorting, crate decapping, bottle unloading, washing, bottle inspection, closure inspection and finished-bottle quality control. The Krones Linatronic empty bottle inspector, Syscona Expert FHK closure inspection system and Krones Checkmat inspection equipment support controlled handling and verification throughout the returnable bottle process.Automated crate handling and inspection equipment can help reduce manual intervention while supporting repeatable product flow between washing, filling, labeling and repacking stages.Production Line Integration CapabilitiesThis complete bottling line is configured for returnable glass bottle production in reusable crates. Its process layout supports the preparation of returned containers, removal of existing closures, bottle and crate washing, empty-bottle inspection, filling and screw capping, wet-glue labeling, final inspection, crate packing and palletizing.Machine typeManufacturer / modelYearDecraterKettner Robot Junior RA3/C-T1996Decapping MachineRINK KM 690/4K2012Bottle WasherGM GERA ARCADE GEL32005InspectorKrones Linatronic2014Various EquipmentSyscona Expert KSA2014Various EquipmentBohrer R 302011Filling Monoblock Ljdpfjz E Dhdex Akmjru

Condition: new, We build your premixer! Our field-proven MultiMix is available in various configurations. Your benefits: • Small footprint, on stainless steel base frame, easy to clean. Nominal capacities from 3,000 to 10,000 l/h Lodoyzf Uispfx Akmoru • Automatic water pressure degassing with vacuum degassing • Fully automatic syrup Brix dosing via a proven gravity-venturi mixing tube system • Reliable CO₂ carbonation with high-pressure pump and temperature-pressure dosing • Fully automatic CIP function • Digitalization with recipe management and syrup blending documentation • Two-component water CO₂ and syrup, optional 3 to 5 components possible • In-house pressure vessel manufacturing with TÜV certification • Intuitive operation via touchscreen and remote maintenance module

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History Lrsdpew D E Ubefx Akmeu This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 750 kg, Industrial system designed for the safe and efficient emptying of bags and Big Bags, ideal for handling powders, granules, and dry bulk materials. Main Features Heavy-duty steel frame 4 pneumatic cylinders for complete bag emptying Lredpfxjz Dq Smo Akmeu Ø 136 mm electric screw conveyor, customizable in X and Y dimensions Lower discharge slide gate FULL AISI 304 STAINLESS STEEL – FOOD GRADE Safety access door Integrated collection hopper Easy cleaning and maintenance Applications Ideal for the food industry, including: Bakeries and industrial bakeries Pasta and flour processing Confectionery and pastry production Pizza and frozen dough production Food premixes and powdered ingredients Animal feed production

Condition: used, Year of construction: 2001, PET single-use filling line for water, soft drinks and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/hour (with 1.0 L) The new bottles are destacked on pallets at the new bottle unstacker and transported pneumatically to the rinser. The system consists of: - Markant 1ASH-PL new bottle unstacker Manufacturer: KHS Year of manufacture: 2001 - Pneumatic bottle transport Manufacturer: KHS Year of manufacture: 2001 - Premix system Intermix 240 EIÜD Manufacturer: Ortmann & Herbst Year of manufacture: 1978 with downstream Velcorin dosing - PET rinser: Innoclean FR-ZR 70/113, 1 B/RL Manufacturer: KHS Year of manufacture: 2001 With chlorine dioxide and sterile water rinsing - PET filler Innofill DRV-VF-PET Manufacturer: KHS Year of manufacture: 2001 With Alcoa screw capper and liquid nitrogen dosing - Fill level control Manufacturer: miho Year of manufacture: 1992 - Container transport Manufacturer: KHS Year of manufacture: 2001 - Labelling machine for wrap-around labels Manufacturer: KHS Year of manufacture: 2003 With hot melt glue melter and best-before date printer Lredpfx Akoxhd Apjmsu Features: New glass removal system; pneumatic bottle transport; premix; rinser/filler/capper; fill level control; container transport; labelling machine