Used Press Brake Ukb - Type 1 Radius for sale (1,02,475)

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dodpsx Sxuksfx Ap Dswc

Condition: used, Year of construction: 2007, functionality: fully functional, FINN-POWER E-BRAKE 200-4100 TS 1 Fully operational servo-mechatronic press brake, supplied with WILA tooling. ⚙️ Bending force: 200 t / 2000 kN 📏 Working length: 4100 mm 📅 Year: 2007 Dwjdpez Nx Nfjfx Ap Doc ⚡ Servo-mechatronic drive – no hydraulics 🛠️ WILA tooling included The machine is in working condition and available for inspection and test bending. 📍 Location: Tukums area, Latvia For further information, photos or videos, please contact us.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) • Die diameter: 850 mm Dsdpfx Apoz I Tkte Dowc • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, operating hours: 23,390 h, pressing force: 85 t, overall weight: 8,600 kg, controller model: TASC 6000, operating pressure: 300 bar, TECHNICAL DETAILS Pressing force: 85 t Pressing force: 850 kN Operating pressure: 300 bar MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Dsdpfxoz Hxtdo Ap Dewc Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

Condition: good (used), We offer a range of tools for press brakes, almost exclusively from the Trumpf brand: OW / OWZ: Upper tool (punch), Top Tool UW / UWZ: Lower tool (die/matrix), Bottom Tool/Die Details, prices, and specifications: OVERVIEW OF INDIVIDUAL SETS (Radius / Angle / Composition): 1. Upper tool (punch) – OW 210/S (R1 / h-240 / 28°) Set composition: 3 pcs x 500 mm, 8 pcs x 300 mm, 2 pcs x 250 mm, 4 pcs x 200 mm, 1 pc x 170 mm, 1 pc x 140 mm, 1 pc x 110 mm, 3 pcs x 100 mm, 2 pcs x 100R mm, 2 pcs x 100L mm, 1 pc x 75 mm, 2 pcs x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 2 pcs x 35 mm, 2 pcs x 30 mm, 2 pcs x 25 mm. Total length of the set: 6,760 m Price per meter: 1,069 EUR Total price of the set: 7,226 EUR 2. Upper tool (punch) – OW 200/S (R1 / h-220 / 86°) Set composition: 7 pcs x 300 mm, 7 pcs x 200 mm, 1 pc x 100R mm, 1 pc x 100L mm. Total length of the set: 3,700 m Price per meter: 935 EUR Total price of the set: 3,460 EUR 3. Lower tool (die) – EV 004 - W12 (R1 / h-150 / 30°) Set composition: 5 pcs x 500 mm, 1 pc x 200 mm, 1 pc x 180 mm, 3 pcs x 100 mm, 1 pc x 55 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 3,485 m Price per meter: 802 EUR Total price of the set: 2,794 EUR 4. Upper tool (punch) – OW 202 K (R1 / h-120 / 28°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 1 pc x 200 mm, 1 pc x 100 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4,050 m Price per meter: 735 EUR Total price of the set: 2,976 EUR 5. Lower tool (die) – EV 004 - W12 (R1 / h-100 / 30°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 1 pc x 200 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4,050 m Price per meter: 668 EUR Total price of the set: 2,706 EUR 6. Lower tool (die) – EV/S-W10 (R1 / h-100 / 84°) Set composition: 2 pcs x 500 mm. Total length of the set: 1,000 m Price per meter: 601 EUR Total price of the set: 601 EUR 7. Upper tool (punch) – OW 280/K (R0.5 / h-140 / 80°) Set composition: 1 pc x 500 mm, 1 pc x 300 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 1,350 m Price per meter: 735 EUR Total price of the set: 992 EUR 8. Lower tool (die) – EV 005 W16 (R1.6 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm, 1 pc x 200 mm. Total length of the set: 4,050 m Price per meter: 802 EUR Total price of the set: 3,247 EUR 9. Lower tool (die) – EV 006 W 20 (R2 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 2 pcs x 300 mm, 1 pc x 200 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4,350 m Price per meter: 802 EUR Total price of the set: 3,487 EUR Total length in the package: 36.960 m Djdpfx Apszrw A Re Dewc Please feel free to request a custom price for the entire tool package!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, pressing force: 86 t, stroke length: 215 mm, overall weight: 7,300 kg, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm MACHINE DETAILS Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V DC Dwodoz Hvgzepfx Ap Doc Compressed air connection: 6 bar Weight of the press: 7,300 kg

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Dwsdpfx Apsz Hwhye Dec Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Equipment: PRESS BRAKE Dsdpfx Aey Um S Njp Djwc Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2023, power: 11 kW (14.96 HP), pressing force: 220 t, stroke length: 3,100 mm, throat depth: 650 mm, total length: 4,500 mm, total width: 2,200 mm, total height: 3,100 mm, overall weight: 16,200 kg, Press brake DURMA - AD-SERVO 30220 MACH-ID 9836 Make: DURMA Type: AD-SERVO 30220 Control: Delem DA69-T YOP: 2023 New 2023 very little working hours ! Hydraulic top and lower clamping CNC Crowning DAM Laser Measuring and Angle correction system Delem DA69-T 3D graphical controller Component Backagauge with R and Z Axis   Under power ! New EUR 120.000 Max. bending length: 3050mm Dwjdpfx Apjz Nwztj Dec Distance between column: 3100mm Max. pressing force: 220T Adjustment X-Axis back gauge:650mm Number of controlled axis: 4 Power: 11kW Length: 4500mm Width: 2200mm Height: 3100mm Weight: 16200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250009, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dodpfez Dh Ifox Ap Djwc Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250010, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis Dodez H Tx Ijpfx Ap Djwc 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_202500011, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Dsdpfjz Eii Tsx Ap Dewc Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_202500010, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Dedpfx Apjz D T Rls Dowc Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Capacity 2050 x 50 tons Delem control system Y1, Y2, and X-axis CNC Dodpfx Apez N Exgj Dewc Includes a set of tooling

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_6, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Dwjdjz A U H Ejpfx Ap Djc Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: B0501A0285, functionality: fully functional, operating hours: 6,560 h, input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, stroke length: 215 mm, operating speed: 220 mm/s, reverse speed: 220 mm/s, table width: 100 mm, table length: 1,275 mm, table height: 950 mm, throat depth: 420 mm, clearance between the columns: 1,040 mm, total length: 2,190 mm, total width: 1,740 mm, total height: 2,375 mm, overall weight: 4,900 kg, Equipment: CE marking, documentation/manual, safety light barrier, I am offering my well-maintained TruBend 5050 for sale. It has no defects, no quirks, and no hidden costs. You are welcome to inspect and test it at any time. I can also take care of the loading. The setup is also not complicated. The buyer is responsible for arranging the shipping. This machine is being offered for sale solely for tax-related reasons. We do not need to and, above all, do not want to sell it below its market value, as it is very reliable and we have grown attached to it. Anyone who is genuinely interested is welcome to contact me. And yes, these are the original operating hours. Nothing has been replaced, falsified, or anything of that nature. The machine has been used very little by both the previous owner and us. The last maintenance was some time ago, but everything else is in absolutely original condition. From the operating manual to the last screw. Dwjdpfxozlutae Ap Djc

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Dwsdpfx Apsyznhls Doc Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Dwjdpfszdgnbox Ap Doc Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 9 kW (12.24 HP), pressing force: 125 t, stroke length: 220 mm, throat depth: 410 mm, total length: 4,200 mm, total width: 2,400 mm, total height: 2,500 mm, overall weight: 10,500 kg, controller manufacturer: CYBELEC, controller model: DNC 800, working width: 3,050 mm, distance between stands: 2,610 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, lower tooling, upper tooling, Hydraulic crowning CN CYBELEC DNC 800 CN axes: Y1/Y2/X1/X2/Z1/Z2/R1/R2 Hydraulic clamping of punches Dwsdpfx Aewrx Tmep Dec Segmented tooling MACHINE OFF GROUND Specifications Bending length: 3050 mm Power: 125 tons Throat depth: 400 mm Distance between uprights: 2610 mm Ram stroke: 220 mm Machine dimensions L x W X H: 4200 x 2400 x 2500 mm Weight: 10500 kg Year: 2001 Main motor power: 9 kW

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Colour: Grey Weight: 10.000 kg - Year: 2007 Dsdpfxezrxfto Ap Djwc - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 11520 - Drive system: CNC - Control system brand: Baykal - Control system type: EC4-CNC - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), overall weight: 7,700 kg, United Austrian Iron and Steel Works press brake Type: AG BAHM 100 4 Capacity: 4000 x 100 tons Djdpfsz Hbu Rex Ap Dowc Weight: 7700 kg The machine can be placed in a museum and is sold as is, where it is.

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Press force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS with back gauge Dwsdpsz A Ia Sefx Ap Djc Weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are probably lost.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: -CNC control Cybelec DNC 880 S -2 support arms Dwjdpfezt R D Dex Ap Djc -Foot switch -Side protective doors -Laser safety system -Tool holder EHT -Pneumatic die shifting system -Crowning -Controlled axes: y1, y2, x, R

Condition: repair required (used), Year of construction: 1993, functionality: not functional, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. Djdpfxjz E U Dpj Ap Dowc An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: ready for operation (used), Year of construction: 2015, Well-maintained, used press brake from Durma. Dwodpfoy Urp Hox Ap Djc Type: AD S 25100 Capacity: 2550 x 100 tons Y1, Y1, X, and R axes CNC controlled Delem DA66T CNC control CNC crowning Akas Fiesler laser safety system Amada/Euro clamping system Includes 1 set of tooling