Used Promotech Pro-72T for sale (5,977)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1595 € 23 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 500 mm 17 kg 23 mm 50 mm 75 mm 190 mm 160 - 250 / 390 - 580 U/min 8 mm The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base (ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash Settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”)Weldon tool holder • Safety strap • Cooling system Itedeyrht Iepfx Acroh • Protective spring for cooling hose • MT2 drift • 6 mm hex wrench • 5 mm hex wrench with a handle • 2.5 mm hex wrench • 8 mm combination wrench • Tool can • Operator’s Manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 lt Vacuumpad Compressed air ecjector Pipe attachement

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: Isdpfx Acoyrhtneroth • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW 316 mm 235 mm 328 mm 115 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current Iodpeyrhqtefx Acreth condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Standard shipping set: • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1055 € 12 mm 19 mm Weldon 1.1 kW 400 mm 126 mm 185 mm 10 kg 12 mm 40 mm 40 mm 45 mm 370 U/min 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank. Features&benefits: • Low profile mag drill of 185 mm height only • Ultra-strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design of just 10 kg • Milling capacity up to 40 mm with annular cutters • Accepts also twist drills with 19,05 mm (3/4”) Weldon shank • Extended stroke of 45 mm allows up to 40mm depth of cut • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Integrated swarf guard • Detachable feed lever (feat. ratchet) can be fixed from either side • Lifting handle for easy transportation • Cooling with a bottle Standard set includes: • Drilling machine • Plastic box • Handle • Pilot pin 6.34 x 102 mm for HSS cutters • Pilot pin 7.98 x 103 mm for TCT cutters • Safety strap • Hex wrench 4 mm • Operator’s Manual Itjdpoyrhp Aofx Acreh OPTIONS (PRICES ON REQUEST): Cutter extension Coolant bottle with nozzle 250ml

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm Ijdpoyrhppjfx Acroth 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: new, Year of construction: 2025, neu 2025 090185 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm Itedpjwirmbsfx Acrsh 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-

Condition: new, neu ca. 6-8 Wochen ab Auftrag Polen 16980 € 326.02 € 1 Itedpfx Asyrhrkjcreh 66 mm 60 ° 300-800 U/min 0 - 1,2 mm/min 6 mm 6.5 kW 1179 mm 853 mm 1524 mm 320 kg portable auto-feed bevelling machine real time measurement and on-screen display double-sided bevelling variable spindle speed milling head including 8 replaceable inserts remote control panel with LCD display max. bevel width: 66 mm at 15° 52 mm at 30° 50 mm at 45° 51 mm at 60°

Condition: new, neu ca. 6-8 Wochen ab Auftrag Polen 26880 € 513.41 € 1 1 30 mm Iodsyrhrdspfx Acroth 60 ° 500-2920 U/min 50 - 150 m/min 3 mm/min 100 mm 7.5 kW 1216 mm 1275 mm 850 kg continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum high speed rotary milling head equipped with 10 inserts cutting inserts for various materials 3D contact wheel control for proper workpiece alignment ergonomic ball roller bench swarf drawer BASIC SET: SBM-500 stationary bevelling machine set of tools user manual in ENGLISH

Condition: new, neu ca. 4 Wochen ab Auftragse Polen 1595 € 1 Iedpfx Aoyrhq Tjcreth 1 21 mm 60 ° 2740-3290 U/min 2.2 kW 21 kg portable heavy-duty machine designed for bevelling steel plates and -pipes guide rolls for easy operation automatic overload protection two milling heads with 10 square cutting inserts

Condition: new, neu ca. 4 Wochen ab Auftragse Polen 2095 € 1 1 21 mm 60 ° 2820 U/min Itsdpfx Acjyrhq Hjroh 1.1 kW 20 kg portable bevelling machine for processing plates and pipes integrated milling head with 10 square TCT inserts one universal guide plate for bevelling both plates and pipes continuous angle adjustment anti-vibration system for comfortable operations induction motor with increased start-up current pipe bevelling adjustmen: 150 - 300 mm 260 - 600 mm (optional)

Condition: new, neu ca. 4 Wochen ab Auftragse Polen 1760 € 1 1 18 mm 60 ° 2-5 mm 1800-5850 U/min 40 mm 2.2 kW 585 mm 156 mm 238 mm 10 kg portable bevelling machine for milling edges of plates and pipes made of steel, aluminum alloys, brass or plastic bevel angle and bevel radius depends on accessories continuous bevel width adjustment overload protection electronic speed control BASIC SET: BM-18 bevelling machine without accessories Ijdpfxeyrhpie Acroth plastic case 32mm open end spanner allen wrench hex s = 6 Grease for fixing screws(5 g, 0.17 oz) user manual

Condition: new, neu ca. 4 Wochen ab Auftragse Polen 7390 € 142.63 € 1 1 14 mm 30 ° 9 U/min 6 - 40 mm 55 mm 100 mm 2600 mm/min 2.2 kW 589 mm 541 mm 320 mm 65 kg bevelling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloys bevelling of lower edge in inverted position standard shearing cutter for processing stainless/alloyed steel reversible spindle against stuck milling tool STANDARD SET ABM-14 beveller milling cutter for stainless steel cutter extraction tool tube bevelling shaft tube bevelling washer Itodpfx Aoyrhn Sscrjh flat wrenches: 12 - 13 mm, 18 - 19 mm, 24 - 26 mm hex wrenches: 5 / 6 mm user manual

Condition: good (used), Morgana Autocreaser PRO 33 Automatic Creasing Machine The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: The Morgana Autocreaser Pro 33 is one of the world’s most popular automatic creasing machines, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, and micro-perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Working width up to 330 mm Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Option to install additional perforating discs – 20, 28, 56, or 90 notches Technical parameters: Maximum format (width/length): 330 x 700 mm Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in a single pass: 16 Number of programs: alphanumeric, unlimited Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1450 mm x 522 mm x 1224 mm Itsdpfx Acezdaw Nsreh Net weight: 121 kg Power supply: 230V, 50 Hz

Condition: good (used), Technical data for the pallet racking crossbar: Racking system: Bito Itsdpfezd Ut Djx Acreh Type: PRO Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: blue Crossbar type: PT150M Box profile: 150 x 50 mm Clip: 5 hooks Clear width: 2,700 mm Maximum load per crossbar pair: 4,250 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Bito Type: PRO Iedpfxezd R I De Acroth Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Crossbeam type: PT150M Box profile: 150 x 50 mm Clip: 5 hooks Clear width: 2,700 mm Max. load per crossbeam pair: 4,250 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports To prevent unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Bito Type: PRO Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: blue Crossbeam type: PT150M Box profile: 150 x 50 mm Clip: 5 hooks Clear width: 3,600 mm Max. load per crossbeam pair: 3,200 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional lifting Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately Itedpfxezd At Se Acreh depending on the delivery location and scope of delivery.

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Iedjy U Ignspfx Acrjth Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Itjdpsywcrwjfx Acrjh Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: excellent (used), For sale: professional screw compressor from renowned German manufacturer BLITZ Model: Monsun Pro Eco 15 – industrial unit with excellent build quality, quiet operation, and high performance. Ideal for workshops, production plants, paint shops, and wherever constant and stable air pressure is required. Itedpfx Acoy A Tp Rjrsh ⸻ TECHNICAL SPECIFICATIONS: • Manufacturer: Blitz • Model: Monsun Pro Eco 15 • Motor power: 15 kW • Working pressure: 10 bar • Capacity: approx. 2.0 m³/min • Speed: 1500 / 3000 rpm • Year of production: 2011 • Power supply: 400V (3-phase) ⸻ OPERATING HOURS: • approx. 17,954 h ⸻ EQUIPMENT: - Control panel - Sound-insulated enclosure - Installation ready for connection - Compact design ⸻ TECHNICAL CONDITION: • Compressor fully functional • Normal signs of wear • Operates correctly ⸻ APPLICATION: • Automotive workshops • Industry • Manufacturing • Paint shops • Service centres

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. Iodpfx Ajvupa Rjcrjth - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Ijdpfx Aevt Tn Ajcrsth Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine Itjdpfx Asy Sd Uijcrsh The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. Isdpfsy Sd Txjx Acroth This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Condition: good (used), The scope of delivery includes: 01x End upright extension, used Shelving system: Bito Type: PRO Material color: sendz. galvanized Frame profile: P5 Profile dimensions: 120 x 76 x 2.25 mm Grid perforation: 50|50 mm Ijdpfx Ajyfq Hwjcroth Height: 500 mm + extension bracket Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is desired, additional costs will apply; these can be requested from us depending on the place of delivery and scope of supply.

Condition: good (used), Technical data for the extension brackets: Manufacturer: Bito Type: PRO Scope of delivery includes: 02x extension brackets, used Material color: Sendzimir galvanized Total height: approx. 295 mm Total width: approx. 85 mm For frame profiles: P6, P5, P4 Depth: approx. 40 mm Material thickness: approx. 4.00 mm Weight per piece: approx. 2.02 kg Note: No fastening material included in the scope of delivery. Your contacts at our company: Itodpfsyfl R Dsx Acreh Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is additionally required, extra costs will apply, which can be quoted separately depending on delivery location and scope of delivery.