Used Quasser Ux 500 for sale (15,408)

Condition: used, Year of construction: 2023, operating hours: 1,285 h, QUASER UX_500 C 23.12.2025 Year of manufacture: 2022, Commissioned: 2023, Like-new, flawless condition, Only 1,285 production hours Standard Specification: - Siemens 828 D PPU29 control with 15" touchscreen - Adjustable operator panel (tiltable and rotatable) - Heat exchanger for climate-controlled electrical cabinet - Tool system: SK40_BigPlus, suitable for holders with/without face contact according to DIN 69871 - Pull studs according to DIN 69872 - Portable electronic handwheel - Double-arm tool changer with 30 stations - Pneumatically actuated tool change door - Direct position measuring system on rotary axis - Direct position measuring system on tilting axis - Infrared receiver for workpiece and tool measurement - Three-color signal beacon - Coolant spray gun - External air blast for dry machining - Automatic central lubrication for ball screws - Computer-optimized, heavy machine base from heavily ribbed cast iron - Sturdy and rigid portal-type machine design - Chip disposal consisting of work area chip flushing system with Grundfos pump (75 L/min at 3 bar) - Chip channels made of stainless steel - Two auger conveyors in the work area - Full work area protection with two corner view windows and two work lights - Flood coolant with 4 ring nozzles at spindle nose, Grundfos pump (75 L/min at 3 bar) - Machine color: RAL 7035 light grey - Coolant tank, spindle headstock, and doors painted RAL 9005 deep black Nedpoy D T H Ejfx Akfjla Existing Siemens options: - SW option: Kinematic measurement cycle 996 for Siemens 828 D - Cycle for measuring the center point of rotary and tilting axes - SW option: In-process measuring cycles for Siemens 828 D - Measurement cycles for automatic workpiece inspection/measurement - Workpiece zero-point probing with infrared 3D probe - Operating manual UX500 Siemens 828 D - SW option 3D simulation - Network drive management Further details, including video, available upon request by email.

Condition: excellent (used), Year of construction: 2008, HEIDENHAIN iTNC530 Nlsdott R E Tspfx Akfsa with A + C axis Working travels 712 x 508 x 515 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw Tool breakage control Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN CH

Condition: new, *IMMEDIATELY AVAILABLE* Including 18 mm floor plate / parabolic suspension / loading ramp / tiltable Technical Data: • Type: New vehicle • TÜV (MOT): New/2 years • Availability: IMMEDIATELY • Permissible total weight: 3,500 kg • Unladen weight: approx. 1,072 kg • Payload: approx. 2,428 kg • Internal dimensions: 520 x 210 x 30 cm (L x W x H) • Overall external dimensions: 673 x 220 x 159 cm (L x W x H) • Loading edge height: approx. 65 cm • Tyres: 195/50R13C • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Vehicle Structure: • Floor: 18mm phenolic resin laminated plywood • Side walls: double-walled aluminium • Side wall height: 30 cm • Chassis: KNOTT parabolic suspension • Tipping function: YES Nljdpfxoyyw Rge Akfja • Hydraulics: manual hydraulic • Loading ramp angle: approx. 11° • Overrun device & brake: KNOTT • Frame/chassis: fully welded, hot-dip galvanized steel frame • Extension: no • Lashing eyes: 8 pieces along side edge • Supports: via rear when tilting • Ramp: 1 upright ramp on shaft, 90 cm • Lighting connector: 13-pin • Registration: ZBII & COC documents Standard Equipment: • Parabolic spring axle (leaf spring) for extreme loads and driving comfort • Fold-down aluminium side walls • Welded side wall/frame construction made from sheet steel, hot-dip galvanized by immersion • Very robust bolted V-drawbar, reinforced • 30 cm high side walls • Hot-dip galvanized steel loading ramp, upright • Very robust fully welded steel frame • Frame completely hot-dip galvanized by immersion • Rubber suspension axle • Multiple reinforced cross members for high point loading capacity • Lashing rings mounted on the outer frame, 8 pieces (4 pairs) • Automatic reverse • KNOTT overrun device and parking brake • Sturdy ramp locks • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog lamp • Recessed lighting in rear frame • Rear side marker lights • Automatic centrally mounted jockey wheel • Registration documents: ZBII & COC papers Optional Accessories – available on request: • 100 km/h approval • Spare wheel • Toolbox • Net hooks • Additional lashing eyes • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing possible - Nationwide delivery available - Vehicle registration documents can be sent in advance or temporary plates (Germany) can be provided. - Export plates incl. customs clearance available All descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been a specialist dealer & service workshop for over 30 years for the following brands: Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix and many more. - Subject to errors, mistakes, and prior sale -

Condition: new, * IMMEDIATE AVAILABILITY * Including parabolic suspension / 18 mm phenolic plywood floor / loading ramp / tiltable Technical Data: • Type: New vehicle • TÜV (inspection): New/2 years • Availability: IMMEDIATE!! • Permissible total weight: 3,500 kg • Unladen weight: approx. 972 kg • Payload: approx. 2,528 kg • Internal dimensions: 420 x 210 x 30 cm (L x W x H) • Overall external dimensions: 573 x 220 x 159 cm (L x W x H) • Loading edge height: approx. 63 cm • Tyres: 195/50R13C • Brakes: yes • Support wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Vehicle Structure: • Floor: 18 mm phenolic plywood • Side walls: aluminum, double-walled • Side wall height: 30 cm • Chassis: KNOTT parabolic spring axle • Tipping function: YES • Hydraulics: manual hydraulics • Ramp angle: approx. 12° • Overrun brake & coupling: KNOTT • Frame/chassis: welded steel frame, hot-dip galvanized • Extension: none • Lashing rings: 8 pieces on the outer edge • Supports: via rear when tilting • Ramp: 1 upright on shaft, 90 cm • Lighting connector: 13-pin • Registration: COC papers Standard Equipment: • Parabolic spring axle (leaf suspension) for extreme loads and driving comfort • Foldable aluminum side walls • Welded steel sheet side wall/frame construction, hot-dip galvanized by immersion • Very robust bolted, reinforced V-drawbar • Side walls 30 cm high • Hot-dip galvanized steel loading ramp, upright position • Very robust welded steel frame • Complete frame hot-dip galvanized by immersion • Multiple sturdy cross-supports for high point load capacity • Lashing rings mounted on the outer frame, 8 pieces (4 pairs) • Automatic reverse function • KNOTT overrun coupling and parking brake • Solid ramp locks • 13-pin plug • Reversing lights • Large safety lighting • Integrated rear fog light • Recessed lighting in the rear frame • Rear side marker lights • Central automatic support wheel • Registration documents: COC papers Nsdpfx Aeyyw Rajkfola Optional Accessories (available on request): • 100 km/h approval • Spare wheel • Storage box • Net hooks • Additional lashing rings • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing possible - Nationwide delivery available - Vehicle registration documents can be sent in advance, or temporary registration plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! For over 30 years, we have been a specialist dealer and workshop for sales and repairs of Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Subject to errors, mistakes, and prior sale -

Condition: new, * IMMEDIATELY AVAILABLE * SPECIAL PRICE for STOCK VEHICLE! Including 18 mm floor plate / parabolic suspension / loading ramp / tiltable Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE • Permissible total weight: 3,500 kg • Unladen weight: approx. 1,164 kg • Payload: approx. 2,336 kg • Internal dimensions: 620 x 210 x 30 cm (L x W x H) • Overall external dimensions: 773 x 220 x 159 cm (L x W x H) • Loading edge height: approx. 65 cm • Tyres: 195/50R13C • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Superstructure: • Floor: 18 mm phenolic plywood • Side walls: Double-walled aluminium • Side wall height: 30 cm • Suspension: KNOTT parabolic suspension Nlodpfx Aoyyw Rmskfoa • Tilting function: YES • Hydraulics: Manual hydraulics • Loading angle: approx. 10° • Overrun device & brakes: KNOTT • Frame/chassis: Welded, hot-dip galvanized steel frame • Extension sides: none • Lashing eyes: 10 along the sides • Props: via rear for tilting • Ramp: 1 upright on shaft, 90 cm • Lighting connector: 13-pin • Registration: ZBII & COC papers Standard equipment: • Parabolic leaf-spring axle for heavy-duty loads and driving comfort • Foldable aluminium side walls • Welded steel sheet side wall/frame construction, hot-dip galvanized by immersion • Reinforced, very stable bolted V-drawbar • Side walls 30 cm high • Hot-dip galvanized steel ramp, upright • Very stable welded steel frame • Complete hot-dip galvanized frame • Rubber spring axle • Numerous stable cross members for high point loads • Lashing rings mounted on outer frame, 10 pcs (5 pairs) • Automatic reversing system • KNOTT overrun device and parking brake • Robust ramp locks • 13-pin plug • Reverse light • Large, safety-sized lighting • Integrated rear fog light • Rear frame recessed lighting • Rear side position lights • Automatic centre jockey wheel • Registration documents: ZBII & COC papers Optional accessories (on request): • 100 km/h approval • Spare wheel • Toolbox • Net hooks • Additional lashing eyes • Reverse light • Lashing straps • and much more New vehicle with warranty and TÜV certificate. ————— - Financing or leasing available - Nationwide delivery available - All prices include VAT - Advance shipment of vehicle registration document possible, or temporary license plates (Germany) can be provided - Export license plates incl. customs clearance available Descriptions and photos are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available from us! We have been specialist dealers & repair workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes, and prior sale excepted -

Condition: used, mileage: 19,300 km, power: 368 kW (500.34 HP), first registration: 03/2025, fuel type: diesel, next inspection (TÜV): 04/2028, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Internal vehicle no.: 153094 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Phone: Interior * Automatic climate control * Air-sprung passenger seat Njdpfx Akeyt Akqjfsla Comfort and Environment * Retarder * Auxiliary heater Additional Features * 3-year warranty from first registration * Adaptive & predictive cruise control * Armrests for passenger seat * Automatic headlight function and rain sensor * DAB radio * Dual PTO with Cabin Interior Control Unit (NH4C) * Air horn * Electric cab tilting system * Electro-hydraulic steering (EHPAS) * Main fuel tank 600 L + additional tank 450 L * Refrigerator * LED lights * Luxury trim * Metallic, Race Red * Hire purchase / financing or leasing available through F-Trucks Finance GmbH. We will be happy to provide you with an offer. * Multimedia system with 7.2" touchscreen & truck navigation system * TPMS tyre pressure and temperature monitoring system * Side panels * Parking air conditioning with 210 Ah AGM battery Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all vans: Optional 12 or 24-month Mercedes-Benz used vehicle warranty available on request. * We are happy to trade in your current vehicle, offset it against the new vehicle or pay you the purchase amount. * Leasing / financing via Mercedes-Benz Bank. We are happy to provide you with an offer. * No liability for printing or typographical errors * Subject to change and prior sale ----.

Condition: used, mileage: 19,300 km, power: 368 kW (500.34 HP), first registration: 03/2025, fuel type: diesel, next inspection (TÜV): 04/2028, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Internal vehicle number: 153094 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postcode 49076), Prof.-Porsche-Str. 7 * Phone: Interior * Automatic climate control * Air-suspended passenger seat Comfort and Environment * Retarder * Auxiliary heater Other Features * 3-year warranty from initial registration * Adaptive & predictive cruise control * Passenger seat armrests * Automatic light function and rain sensor * DAB radio * Dual PTO (Power Take-Off) with Cabin Interior Control Unit (NH4C) * Air horn * Electric cab tilting system * Electro-hydraulic power steering (EHPAS) * Main tank 600 L + auxiliary tank 450 L * Refrigerator * LED lighting * Luxury specification * Metallic finish, Race Red * Hire purchase/finance or leasing possible through F-Trucks Finance GmbH. We are happy to provide you with an offer. * Multimedia system with 7.2" touchscreen & truck navigation system * TPMS Tyre Pressure & Temperature Monitoring System * Side fairings * Stationary air conditioning system with 210Ah AGM battery Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all transporters: Option of 12- or 24-month Mercedes-Benz used vehicle warranty available on request. * We are happy to accept your current vehicle in trade-in, offset it against your new vehicle, or pay out the purchase amount. * Leasing/finance available through Mercedes-Benz Bank. We are happy to provide you with an offer. * No liability for printing & typographical errors * Subject to prior sale and errors. Nljdpeyt Akwofx Akfea

Condition: used, Vacuum cutter Manufacturer: Laska Nodpfx Aevytf Uskfjla Model: KUX 500 Made of stainless steel Dimensions: 4170x3280x2850mm Electric power: 199kW Voltage: 3 x 400V 50Hz Weight: 6000 kg

Condition: new, empty load weight: 1,164 kg, maximum load weight: 2,336 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 6,200 mm, loading space width: 2,100 mm, loading space height: 300 mm, loading space volume: 3.9 m³, color: silver, construction height: 1,590 mm, working width: 2,200 mm, Automatic reverse drive, 18 mm floor plate / parabolic suspension / drive-on ramp / tiltable, hot-dip galvanized, * IMMEDIATELY AVAILABLE * incl. 18 mm floor plate / parabolic suspension / drive-on ramp / tiltable Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 3,500 kg - Unladen weight: 1,164 kg - Payload: 2.336 kg - Interior dimensions: 620 x 210 x 30 cm (L x W x H) - Overall exterior dimensions: 773 x 220 x 159 cm (LxWxH) - Loading sill height: 63 cm - Tires: 195/50R13C - Brakes: yes - Support wheel: yes, automatic - 100km/h: optional - Incl. Vehicle documents Vehicle superstructure: - Floor: 18mm screen printing plate - Side walls: double-walled aluminum - Side wall height: 30cm - Chassis: KNOTT parabolic suspension - Tipping function: YES - Hydraulics: manual hydraulics - Drive-on angle: approx. 10 - Overrun device & brake: KNOTT - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: no - Lashing eyes: 10 on the side edge - Supports: when tipping through the rear - Ramps: 1x upright on shaft 90cm - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Parabolic spring axle (leaf spring suspension) for extreme loads and driving comfort - Folding aluminium drop sides - Welded drop side/frame construction made of sheet steel, hot-dip galvanized - Very stable bolted V-drawbar REINFORCED - Drop sides 30cm high - Hot-dip galvanized steel ramp, upright - Very stable welded steel frame - Frame cpl. hot-dip galvanized frame - rubber spring axle - many sturdy cross beams for high point loading - lashing rings mounted in the outer frame 10 pieces (5 pairs) - automatic reversing - KNOTT overrun device and parking brake - sturdy locks for ramps - 13-pin plug - reversing lights - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - rear side position lights - automatic center support wheel - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - spare wheel - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Njdpfx Aju Hrmhjkfsla

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Nsdpfx Akjy Hgltjfjla Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Available with QSA slots (quick format change by disabling selected needles without removing the slot) Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) 3-phase powered Weight: 120 kg

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Nodpfx Asy Hglmokfola Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up.

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm Njdpfx Ajydc R Sekfsla - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Nodpfxoyrhb Ss Akfjla Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Nljdpfeyy Ripsx Akfja Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system.

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm Nljdpey Hiphjfx Akfsa - Length : approx. 8.4 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: good (used), Renz ABL-500 Automatic Spiral Binding Machine A powerful machine for the production of calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined lengths, inserts the hanger, and clamps the binding. Max. feeder size: 500 x 700mm Min. feeder size: 70 x 135mm Max. thickness: 15mm Table with folded sheet feeder Automatic hanger loading and mounting Automatic wire pick-up from the roll with wire spacer removal Closing module Delivery Central controller for the entire machine Capacity up to 2500 cycles/h Nledpoywdugefx Akfsa 380V power supply + compressed air The machine has a central lubrication system. Weighs 1300kg Includes many additional components, tools, and documentation.

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Nodpfx Asywdrfskfola Power supply: 230V + compressed air Weight: 615 kg.

Condition: good (used), Rilecart R-500 Semi-Automatic Spiral Binding Machine Efficient semi-automatic machine for producing calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined sections, inserts the hanger, and clamps the binding. Maximum binding width: 500 mm; minimum: 50 mm Automatic hanger loading and installation Capacity: up to 1500 cycles/h Power supply: 230V + compressed air Nljdpfx Ajywdntekfja Made in Italy. Weight: 450 kg

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: Nlodoyw Ua Topfx Akfsa - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. Nsdpfx Akoyr Aacofjla This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Weight: 60kg

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers Nlsdjxmrwfjpfx Akfoa • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Nljdsyym Sajpfx Akfoa

Year of construction: 1997, operating hours: 54,646 h, condition: used, Traub TNA500 Serial No. 253 Spindle speed: 2800 rpm 12-position tool turret Equipped with driven tools Njdpfx Aoyt Slwokfjla Power: 46 kVA

Condition: excellent (used), For sale: Industrial deburring machine from the German manufacturer Rolei Eisenblätter GmbH, model PEF 500. The device is designed for precise deburring, chamfering, and edge preparation of steel, aluminum, and other metallic workpieces. Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust steel construction Nodpfx Akow R E Hpofjla V-shaped work table—ideal for guiding components Electric drive with safety switch Application: edge processing, chamfering, weld seam preparation, and the removal of burrs after cutting and machining The machine is fully functional and in good technical condition. Extremely stable construction, ideal for workshops, metalworking shops, toolrooms, and series production.

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Nlodpeyhnukjfx Akfsa Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.