Used Richard Hess Mbv Gmbh Rheometer for sale (68,427)

Condition: like new (used), Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Mini Rheometer – Precise Analysis of Crosslinking Behavior Ijdpfxjxzrbaj Agyeih The Mini Rheometer is a high-precision testing device for determining the crosslinking behavior of rubber and other crosslinkable polymers. Versatile Application Options ✔ Determination of processing time for resins, cements, and adhesives ✔ Use in the dental industry ✔ Suitable for research, development, and rapid product inspection Efficient & Fast Testing The test duration matches exactly the crosslinking time of 1 g of material at the set temperature. Operating principle: Linear shear deformation according to DIN 53529 Part 1 Innovative Technology for Reliable Results ✔ Hinged measuring chamber with integrated sensor paddle ✔ Fast temperature stabilization due to the small chamber volume ✔ Dynamic measurement using sinusoidal shear loading with low amplitude and frequency ✔ Precise data acquisition via a load cell, connected to modern electronics & software ✔ Display of the crosslinking isotherm & evaluation according to DIN 53529 Part 2 Scope of delivery: Mini Rheometer, software, Windows 11 PC, volume punch

Condition: refurbished (used), Year of construction: 2015, operating hours: 180 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS Extended version by 254 mm With 5KN 500N load cells, screw-type clamping device up to 5kN, and Windows 10-11 software For tensile, compressive, bending, and shear testing, etc., in accordance with EN ISO 7500-1, ASTM E4. The H5kS is a universal testing machine designed according to the latest standards. The machine operates in accordance with the relevant EU radiation protection and safety guidelines (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage within the machine is 48 volts. Special features: • Large, easy-to-read liquid crystal display with backlight • Graphical or numerical display mode Ijdpfozt S Hmex Agyoih • Alphanumeric file input • Speed range 0.001 to 1000 mm/min (2.5kN) • Speed range 0.001 to 500 mm/min (5kN) • High return speed 0.001 to 1500 mm/min • Precise crosshead positioning • Robust load frame • Output of test results with mean value and standard deviation via printer • Wide selection of testing software under Windows for various standards • RS232 interface for use with computer systems • Accuracy of the force display of the load cell: 0.5% across the entire range • Accuracy of the displacement display: 0.001 mm • Equipped with a force and displacement alarm system • 32-bit motor controller • 20% digital weight adjustment during calibration of the load cell capacity • Automatic motor alarm for over- or undervoltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of the displayed force in the range of 2% to 100% • Accuracy of position measurement: +/- 0.01% or 0.001 mm • Accuracy of speed: +/- 0.005% of the selected speed • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Technical data: • Single-column table model • Maximum load: 5kN in tension and compression • Maximum travel: 1004 mm without clamping device • For further details, please refer to the brochure. Dimensions: Height: 1394 mm Width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: good (used), Year of construction: 2013, operating hours: 300 h, functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, Iedpfxsq Ruw Ns Agyeih ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: new, Year of construction: 2025, functionality: fully functional, Pneumatic punching press HPA, 8 to 60 kN, available upon request. Direct-acting punching press with a pressing force of 17 kN. Pressing force 17 kN. Working stroke 40 mm. Overhang 100 mm. Table size W 300 x D 200 mm. Ram bore 20 mm. Ijdpfxezn Nqfo Agysih Weight 41 kg. Two-hand control panel. Two-hand operation: both buttons must be pressed simultaneously with both hands. Complies with the requirements of EN 574, Class IIIB 1. • Ram with anti-rotation feature. • Simple height adjustment of the press head via a threaded spindle and bevel gear. • Side-mounted measuring tape for quick reproduction of settings when changing tools. • Virtually maintenance-free, double-acting cylinder.

Year of construction: 2026, operating hours: 1 h, condition: new, machine/vehicle number: H10TM, Universal testing machine H10TM Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 84 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 10 kN Including evaluation electronics and basic software. Iedpfozuma Rjx Agyjih Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Load cells: 5N-10N-20N-50N-100N-200N-500N-1kN-2kN-3kN-5kN-10kN - Grips: Compression platens, bending fixtures, shear fixtures, wedge grips, scissor grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2026, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Isdpfjki Tqcex Agyjih Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Year of construction: 2025, condition: new, machine/vehicle number: H3000-H5000TM, Universal Testing Machine H3000TM-H5000TM according to DIN EN ISO 7500 The H3000TM-H5000TM series universal testing machine is a single-spindle machine with a robust design made of aluminum and V2a, featuring ball screws, ball bushing guides, and a toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a foil keyboard. A 2-line LCD display shows the force and displacement. The testing machine can be used as a standalone unit or connected to a PC via a USB interface. The displacement measurement is performed using an encoder with a visible resolution of 0.01 mm on the LCD (internally 0.0001 mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally, a second channel can be added for a second force transducer or a displacement sensor. The universal testing machine is manufactured with two different travel distances, 500 mm or 1200 mm (without load cell and testing tool). Further scope of supply: A load cell up to the nominal load, 220-volt cable, USB cable, description, CE declaration of conformity. Further information can be found in the attached description. Force transducer 3000N-5000N Measuring range: 5-5000N tensile and compressive, with nom. 2mV/V Output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate. Long-travel extensometer HE 900mm measuring path, measuring arms motorized, including electronics. Accuracy class Class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optically incremental Measuring path 900 mm, less the measuring length Display error 6 µm or 2 % Resolution 1 µm Actuation force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo setting is done manually Measuring arms Opening and closing are motorized Specimen diameter 0-30 mm Specimen thickness 0-30 mm Ijdpfxoiq Hxke Agyjih Specimen width 0-100 mm Weight approx. 32 kg Scope of supply Extensometer complete with electronics Cutting, round: 1 set of hard metal / rubber Wear parts Measuring blades optional rectangular blades CAUTION: When using optional blades, a readjustment of the Lo stop is required.

Year of construction: 2026, condition: new, Punching knives eroded from solid steel Our punching knives are manufactured from selected steels and are available in a wide range of geometries and standards of all types such as ISO, DIN, JIS, ASTM, IEC. They are characterized by: - competent steel selection Iedpfx Agskkhkujyjih - material specific cutting geometry - optional equipment with various specimen ejectors and clamping spigots - individual production in different heights possible - also possible as multicutter - long tool life - excellent cutting finish - optimal cutting results - suitable for every type of press e.g. manual toggle presses, pneumatic and hydropneumatic presses

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), 1 Hydropneumatic press type STHP 60 kN with two-hand operation - floor model with and without base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier which can increase the punching force up to 5 times. During the working stroke, the punching cylinder is pressurised with oil by the pressure intensifier and thus has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders. Iisdpfjpn Unvjx Agyoh

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,022 h, machine/vehicle number: 2621150, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: VARIOBEND / ASCO, controller model: VARIOBEND Touch Control, working width: 6,400 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,300 mm, overall weight: 8,800 kg, total length: 7,200 mm, total width: 2,150 mm, total height: 1,600 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, year of last overhaul: 2025, Equipment: CE marking, angle stop, centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, We are offering for sale a VARIOBEND CNC sheet metal folding machine, manufactured by ASCO GmbH, Germany. The machine is currently owned by DIMING d.o.o., a company based in Slovenia, specializing in construction and sheet metal works. The machine is designed for precise and efficient sheet metal bending and is particularly suitable for roofing, façade construction and architectural sheet metal fabrication. Its robust construction and CNC-controlled operation ensure accurate, consistent and repeatable bending results, making it suitable for professional sheet metal processing. We are upgrading our machinery and investing in a newer-generation folding machine. Isdpfxsz Sz Txs Agyoih The machine is available for inspection in Slovenia by prior arrangement.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) Iedpfxjz I Tkto Agyjih • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: good (used), Year of construction: 2013, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, Exo-Zell-EROWA automation with EDM314MF30+HSC600/5 Automation kit EROWA UPC table clamping system with adapter plate ITS/Powerchuck 10 pallet changing stations 150 electrode changing stations JMS-Certa identification Measuring machine DuraMAX EDM314MF30, year of manufacture 2013 Technical data: Travel ranges XxYxZ 905x705x455mm Workpiece table: 1150x850mm Tank size 1200x900mm Filling height of the work tank 500mm Distance table/electrode holder 250/700mm Workpiece weight max. 3000kg Dimensions WxDxH 2090x3416x3100mm Machine weight 7500kg Operating hours 10,000h Control interface MF30 Backflushing filter with dirt container Integrated cooling unit Automatic tank refill Iisdpfx Agez Sp Haoyoh Extinguishing system Co² Smoke extraction Fire protection flap Erosion generator exopuls+60A C-axis 100°/min with holding brake, direct measurement Direct measuring system in all axes HSC600/5, 5-axis, year of manufacture 2008 Control iTNC530i Milling spindle HVC140, 42000rpm Technical data: Travel range XxYxZ 650x550x400mm Travel range BxC B105+/- C endless Table diameter 410mm Distance table/spindle nose 600mm Workpiece weight max. 200kg Rapid traverse 50m/min Rotational speed B/C 80/80°/min HSK40-E 60-position tool changer Oil mist extraction Minimum quantity lubrication Manual control panel with handwheel Adjustable air/cooling supply Kinematics optimization Calibration sphere for kinematics optimization Length compensation for all axes HIB cooling unit Measuring probe Renisaw OMP400 Calibration ring Performance acceptance test Transport Commissioning on site Training

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Interfaces: Filling – Flange at the silo Discharge – Conveyor screw with filter and rotary valve Iiodpez Nkt Nofx Agyeh These are two silos – the package price is 15% lower than the stated individual price of a single silo.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. Iijdpfsz Iww Rox Agyjh The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Matching base frame Wired hand control unit Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 Ijdpfxsz D Htgj Agysih The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Price: net 12,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Ijdpfx Ajz Ikzpsgyoih Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Iisdozw Ukcepfx Agyjh Chip-free Easy to maintain No cooling and lubricating agents required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 16274986/1, functionality: fully functional, Multiripsaw for edging boards, max cutting height 125 mm, max passage 950 mm, el.power 75 kW Iijdpfx Agjz N Tfusyeh operating panel, conveyors

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Ijdpfoz Ixc Isx Agyeih

Year of construction: 2011, condition: used, Build volume including build platform: 250x250x325mm, laser type: Yb fiber laser (ytterbium), 1x 200W, 1x 400W, manufacturing process: metal powder bed fusion (DMLS/SLM), precision optics: F-theta lens, high-speed scanner, max. scanning speed: 7m/s, variable focal spot diameter: 100-500µm, power supply: 32A, connected load: 8.5kW, nitrogen generator: integrated, compressed air supply pressure: 7,000hPa, volume flow rate: 20m³/h, argon supply pressure: 4,000hPa, volume flow rate: 100l/min, length: 2,200mm, width: 1,070mm, height: 2,290mm, min. recommended installation space: 4,800x3,600x2,900mm, weight: 1.325t, operational hours counter: 1138h, both lasers must be configured or initialized before operation. On-site inspection is possible. Isdpfx Asz R Uxgsgyjih

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Isdpfx Agsziaqfoyoih

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Iodpfozilz Nox Agyoih Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1250 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. Iiedpfewq I U Rox Agyeh No backgauge *

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring Isdpfezqucfsx Agysih PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: used, Year of construction: 1988, machine/vehicle number: 112 009 00, Na sprzedaż sprawna maszyna przemysłowa renomowanej niemieckiej marki Ramisch Kleinewefers GmbH (rok prod. 1988, nr fabryczny: 112 009 00). W zestawie znajdują się dwa dodatkowe, duże wałki (cylindry) na zmianę/wymianę, co pozwala na dostosowanie maszyny do różnych procesów i materiałów. Stan techniczny: Maszyna w pełni sprawna, w dobrym stanie, gotowa do pracy. Iiodozz Iz Njpfx Agyjh W zestawie: Kalander + 2 kompletne wałki wymienne (np. o innej twardości, strukturze lub powłoce). Zastosowanie: Przemysł tekstylny, wykończalnictwo tkanin, obróbka włóknin, gładzenie, prasowanie, embossing/tłoczenie lub przetwórstwo tworzyw sztucznych. Jakość: Solidna, ciężka, zachodnioniemiecka konstrukcja (Made in Western Germany).