Used Riggs Autopack Ltd Depositor for sale (3,804)

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Pgedpfx Aiowpunborsu Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: PI2512080FF001, tank capacity: 600 l, usable tank capacity: 600 l, total length: 2,000 mm, total width: 1,520 mm, total height: 1,700 mm, inner diameter: 1,200 mm, wall material: stainless steel, discharge height: 1,000 mm, input voltage: 38 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, 1. The pot liner is made of 304 food-grade stainless steel, with an inner liner of 5mm and an outer liner of 3mm. The pot liner is formed in one stamping process. 2. Pot inner diameter size: 1200mm, depth 750mm, working capacity approximately 200-400kg. 3. The dimensions of the equipment are approximately 2000mm in length (including control cabinet), 1520mm in width, and 1700mm in height. (The height when the large arm is raised is about 2450mm). 4. The total power of the equipment is 38.2 kW, with a heating power of 36 kW (controlled in three levels, each can be turned on separately). The mixing motor is 3 kW (using variable frequency speed regulation). 5. Heating method: The heating tube heats the thermal oil, allowing for setting the temperature, frying time, and continuous frying for extended periods. 6. The main structure of the frame is entirely made of 80*80 high-strength stainless steel. Psdpfxo Agm S Tj Airegu 7. Stirring system: It adopts a special planetary tilt rotation, 360-degree scraper without dead corners, and is equipped with a stirring auxiliary device. The stirrer uses a polytetrafluoroethylene scraper, and the pot has a side scraper device. 8. The stirring belt has variable frequency (the stirring speed can be adjusted), comes with a gear-free maintenance motor and uses thermal oil. 9. The equipment has dual-cylinder hydraulic discharge, equipped with a 1.5kw hydraulic station, with a discharge height reaching 900-1000mm.

Year of construction: 2014, condition: good (used), Riggs 1000 Depositor Pedpfxszvlkke Airjgu Stainless depositor, 50L hopper, filling 5ml to 55ml, with nozzle on hose, mobile

Year of construction: 2020, operating hours: 2 h, condition: good (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Pgjdozhifijpfx Airju Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Condition: good (used), Year of construction: 2016, Riggs 1000 Twin head depositor Pjdpfx Ajy Umxpjirsgu 2016, Stainless frame, twin head depositor, one head fills from 50ml to 600ml and the other from 125ml to 1200ml, on mobile scissor lift table

Year of construction: 2015, condition: excellent (used), functionality: fully functional, 1 x Atwell Labellers Ltd wrap-around label applicator fitted with rotary collection table and Markem-Imaje thermal transfer printer. Previously used to apply labels to 25ml - 80ml bottles. Manufacturer of system - Atwell Labellers Ltd. Date of manufacture - 2015. Supplied with: 1 x Modular belt conveyor fitted with guide rails. Belt dimensions - 2500mm long x 150mm wide. 1 x EME Series 2000 labelling head. Pgodpfx Ais Aa Drlerou 1 x Markem-Imaje SmartDate X45 thermal transfer printer/touch-screen control panel. Date of manufacture - 2025. Printhead - 53mm. 1 x Rotary collection table. Diameter - 900mm. Voltage - 230 V / 50-60 hz / 1 phase. Overall dimensions - 2500mm long x 1600mm wide x 1550mm high.

Condition: defective spare-parts repository (used), functionality: limited functionality, power: 41 kW (55.74 HP), gearing type: other, fuel type: diesel, color: yellow, overall weight: 5,740 kg, empty load weight: 5,740 kg, number of seats: 1, first registration: 06/2010, mast type: telescopic, brakes: engine braking, Year of construction: 2010, operating hours: 4,000 h, machine/vehicle number: 1296435, Equipment: cabin, rubber tracks, JCB Excavator • Manufacturer: J.C. Bamford Excavators Ltd., Rocester, Staffs, England. • VIN (Vehicle Identification Number): SHA08056201296435. • PIN (Product Identification Number): 1296435. • Engine serial number: 4JG1-376030. • Slew gearbox serial number: 0712095. • Left-hand track gearbox serial number: M10002991. • Right-hand track gearbox serial number: M10002351. • Weight: 5740 kg. Podpfx Aoz Ipkieirsgu • Year of manufacture: 2010. • Engine power: 41.0 kW / 2200 RPM. • Requires hydraulic pump replacement.

Condition: used, Year of construction: 2014, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 1, total height: 3,000 mm, total width: 3,000 mm, total length: 40,000 mm, overall weight: 40,000 kg, type of input current: three-phase, input voltage: 360 V, year of last overhaul: 2026, transport length: 12,000 mm, noise level: 70 dB, protection type (IP code): IP46, transport width: 2,500 mm, Equipment: documentation/manual, 21-STAGE LINE FOR PET BOTTLE RECYCLING, INCLUDING SORTING, WASHING, CLEANING, DEGREASING, LABEL REMOVAL, SHREDDING, AND DRYING. Pgjdpsz Syplefx Airju

Condition: used, Year of construction: 2007, Format: 920 mm Pjdpfx Aie Afn Ihjrsgu Equipment: Air table program 3x extra blades

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate Podpfx Aiszt Nbzjregu - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101022-76F, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 380 V, Up for sale is a high-performance BOPP Slitting and Rewinding Machine manufactured by KUO GANG MACHINERY CO., LTD (Model: KG-201). This versatile industrial machine is specifically engineered for precision slitting and high-speed rewinding of BOPP adhesive tapes, packaging tapes, and various plastic films. Built with a robust mechanical frame, it offers high stability, precise tension control, and reliable continuous operation, making it an ideal choice for packaging manufacturers, tape converters, and printing facilities. The machine is in fully complete condition and comes equipped with an extended discharge/loading framework and auxiliary support structures. Features & Capabilities: Precision Slitting & Rewinding: Designed to handle BOPP rolls with clean edge-cutting and neat rewinding finish. Adjustable Speed Control: Smooth operational speed adjustment up to 100 m/min for optimized production cycles. Heavy-Duty Construction: Solid steel frame designed to minimize vibration during high-speed runs. Integrated Extension Bench: Includes extended feeding/discharge rails and support tables for convenient material handling and core loading. Easy Maintenance: Simple access to slitting blades, roller guides, and drive systems for minimal downtime. Pgsdpfx Ais Admamerju

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Description Solid/liquid separation unit based on a centrifugal sifter (Centri-Sifter): solids are conveyed along the basket/screen by a paddle, while the liquid is separated and discharged through a dedicated outlet. Adjustable inclination to optimize residence time and separation efficiency. Sold with a 1000 L hopper and a flexible screw conveyor. In like-new condition (used only for testing), fully functional, and available immediately. Main equipment – Centri-Sifter • Type: centrifugal sifter (liquid outlet + solid outlet) • Construction: 304 stainless steel • Basket/screen: wedge wire basket (304 stainless steel) • Paddle: “expanded 7.5°” (304 stainless steel) • Safety: inspection door with interlock (operator safety) • Weight (machine): ≈ 220 kg • Purge air/gas (seals): clean/dry/filtered air/gas required Motor (motor plate) • Motor 3~: 2.2 kW, 50 Hz, 230 V Δ / 400 V Y • Speed: 1450 rpm (50 Hz) • Protection / efficiency: IP55, IE3 • Mounting: IM B35, service S1 Included equipment (sold with) 1) Hopper • Volume: 1000 L • 304 stainless steel, open design, “food grade” finish (Type C Plus) • Level probes: high + low • 30° outlet 2) Flexible screw conveyor Psdpfxjzc H H Ie Airsgu • Supplier: Spiroflow Ltd • Model: 146SH • Length / inclination: 3 m 30° • Outlet: Ø300, 30° standard • Components: reverse bung / drop trap / QR flanges (quick disassembly) Price and conditions • Availability: immediate • Location: Martigny (Switzerland) • Condition: like new, functional • Visit / inspection: upon request Transportation costs are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, product width (max.): 330 mm, working width: 330 mm, „Technically audited by Focus Machinery expert on June 5th, 2026 – 100% ready for production" 8 colour UV-Flexoprinting machine: Model eFlex 330-2 S Pgodpfx Aijrxrx Sjreu

Condition: used, functionality: fully functional, We offer this used Meter Mix Systems Ltd, United Kingdom PAR30 dosing system, year of construction 2004. Pgodpfxsz N Amhs Airju Manufacturer: Meter Mix Systems Ltd, United Kingdom Model: PAR30 Construction Year: 2004 Condition: used Category ID: 620 Type ID: 439 Type: dosing system If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Pgsdpezrmigsfx Airsu Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Riggs twin depositor system, 2 separate depositors with large hopper. Lovely condition, perfect for filling sauces into ready meals etc. Pjdpfx Ajm Sg H Deirogu

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high. Pgedpfxoynnlij Airsu

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Podpfxjy Uni Ns Airjgu Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, CNC mandrel bending machine including O-ring assembly Fully automatic, high-precision production cell for the series production of pipework systems (e.g. brake, fuel or hydraulic lines), including a robot, feeding system, dual O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology sectors. Technical data 1. CNC mandrel bending machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Pgedezz Hmqepfx Aireu Type: EMO-20R-S Year of manufacture: 2001 Control system: Multi-axis CNC control with operator panel Special features: Collet head movable in X / Y / Z, equipped with 3 bending planes for highly complex three-dimensional shapes without tool changes. 2. Loading and unloading robot Manufacturer: Motoman (Yaskawa) Model: ERCS-UP6-A00 Year of manufacture: 2000 Robot control: XRC including original teach-in terminal (handheld control unit) 3. Automatic O-ring assembly stations Manufacturer: ASM HASEMO GmbH Type: MOSA-800 / MOSA-1100 Year of manufacture: 2010 (high-quality upgrade/retrofit) Function: 2 O-ring assembly stations including a complete bulk material feed system (vibration hoppers/spiral conveyors) for twist-free and gentle external assembly of sealing rings. 4. Quality assurance & peripherals Measuring computer / leak tester: Innomatec, type: LT-C602 (for direct in-line testing) Blow-off station: Integrated for cleaning

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Pgsdpezbkl Sefx Airju Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Pedpfsy Hlvwsx Airjgu Condition – Fully operational.

Condition: excellent (used), Year of construction: 2020, Baling press, MACFAB, – used –: Price ex works: €13,500.00 (net)! Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of manufacture: 01/2020 Serial number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "Bale ready" indicator Horizontal door that pivots to the side Surface / Color: RAL6018 Feed opening: 1,500x880x769mm (WxHxD) Dimensions, press: 2,100x1,524x3,217mm (WxDxH) Former new price: €18,921.00 Pgodpfx Ajzxciioirju Condition: The machine was only used once for testing purposes. Available: immediately Location: 72336 Balingen

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase. Podpfx Aiovw I Nisrsgu

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 Pgodpfx Aexuhw Dsirsu 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new FoodMAC International Ltd BULLDOG 6000/600 Electric Fryer for frying cut potatoes and similar products, year of construction 2023. Model: FRE 6000/600 Voltage: 400 V Power: 200 kW Year of manufacture: 2023 Weight: 1980 kg Pedezgt D Hspfx Airegu Machine number: 3035 Capacity: 1500 kg/h If you have any questions or need more information, feel free to send us a message or give us a call.