Used Rsa Stl 1 for sale (78,634)

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Laedjxpqy Repfx Afuoc Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Condition: excellent (used), Year of construction: 1980, I will sell a brush sander in good condition. - 1500/3000rpm. Ljdpfx Asv T Tq Rjfueac - 380V.

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Lajdpfx Ajx An Eqefuoc

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Laedjx Eg T Espfx Afuec

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Laedpex Ek Rdofx Afuoc Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: used, Year of construction: 2014, Used equipment. Please ask for additional details. Lodpfsyzgpzjx Afusac

Condition: good (used), Min. Pipe length: 100-1800 mm Lodpfxoq U Rccj Afusac The system was previously used for deburring cut pipes!

Condition: good (used), Motor: 2.2 kW Extraction capacity: 1800 m3/h Laodpfxjq U Rbqe Afujc

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm Lsdpfsrcnm Nex Afuoac -Weight: 1.5 kg

Year of construction: 2025, condition: refurbished (used), REVISED by RSA in 2025 Revised & Cleaned & Repainted Replacement of wear parts Tested in our facilities in production prior to shipment Round: Ø 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting & deburring lengths : 100 – 1.000 mm One heavy duty RSA cutting unit model NC2001 with : -Bundle loader, size approx. 600 x 600 mm, usable length approx. 6.200 mm and maximum bundleweight 3.000 Kg -Double feeding rolls -Heavy-duty cutting motor and gear box, with 5,5 kW motor; cutting motor speed 30-250 rpm -CNC movement up/down for precision cutting. (new version, NO hydraulics) -Hydraulic regulation in clamping units -1 Full automatic adjustable length control with CNC stopper One deburring unit RASAPLAN 1000 with : -Automatic length adjustment according to cut length -Synchronised chain transport Lajdpfsvtpd Tjx Afusc -Integrated dust exhaust unit Electric : -Program for short lengths -Special program module for calculation of swivelling discharge -Operator panel Siemens OP 17 -Combined cooling through spray mist & jet cooling -Servo axes Revised: 2024 Round: 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting & deburring lengths: 100 – 1.000 mm

Condition: new, Siemens C98043-A1210-L20 Simoreg board with accessory set C98043-A1210-D2-1 < unused > in opened original packaging, 100% functional Ledpsxahqnjfx Afusac

Condition: new, Schunk PZN+160 / 1 AS universal gripper 303514, unused, 100% functional, scope of delivery as per photos Laedjulqk Iopfx Afuec

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2011, loading space length: 13,870 mm, loading space width: 2,550 mm, Due to the large number of illegitimate emails / Emails will not be answered WhatsApp Loading height: 85-90 cm Last axle = steering axle Tyres: 215/75R17.5 Laodpfxoxptnqj Afuoc NO TÜV / NO SP "SUBJECT TO ERRORS, TYPOS AND PRIOR SALE"

Condition: new, maximum load weight: 32,703 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,712 mm, Equipment: ABS, * NET PRICE * SAF axles with disc brakes * Lift axle * Pallet box for 32 pallets * Anti-vandal tarpaulin * Lashing eyes left and right * Pallet stop edge right and left Ljdpewklhuefx Afueac * Toolbox * Code XL/Beverages/Waste Paper/Daimler * Edscha roof * Portal doors * Aluminum slats * LxWxH: 13.63 x 2.48 x 2.71 * Tires: 385/65 R22.5 * 4 available * New vehicle available immediately from stock * Financing * Rental possible (Krone, Schmitz, or similar) Subject to errors and prior sale! Sale is subject to exclusion of any warranty! We speak Russian - We speak English - We speak Polish - We speak Spanish

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Lasdjuu Rthjpfx Afujc Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Year of construction: 1961, condition: used, General / technical data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Ledpfxelwu Hrj Afusac Model: RSA 10 T/Zw. Year of manufacture: 1961 weight: approx. 6.500kg tractive force: 10t clearing speeds: 1 - 11m/min return speeds: 7 - 25m/min maximum stroke: per machine unit 1250mm clamping area: 500 x 500mm passage width: 380mm power supply: 380 Volt / 50 Hz Remark: The machine is under power in our warehouse and can be inspected.

Condition: excellent (used), Year of construction: 2006, operating hours: 1 h, functionality: fully functional, K+G Wetter VCM 120 STL Lajdpoxpwc Sefx Afuoc Condition like new, used only few times to try. The blades are never sharpened, in factory installed. Everything works. Machine length 2400 mm Machine width 2250 mm Machine height 1780 mm Machine weight 1650 kg Bowl Volume 120 liters

Year of construction: 2025, condition: new, We manufacture new row cleaners according to customer requirements. Lasdpfsxrcyhjx Afuoc

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield Lodpogvu Aljfx Afueac - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: used, mileage: 1,000 km, power: 375 kW (509.86 HP), first registration: 10/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #391 Mercedes-Benz AROCS 3545 L 8x4 B13 Kroll K 1.0-18.0 /36PESP, Suction Unit This Mercedes-Benz Arocs 3545 L 8x4 is equipped with a powerful KROLL suction/pressure tank superstructure of ADR class L4BH. With a tank capacity of 18,000 liters, VacuStar W1600, Speck P52/100-150, and hydraulic tank equipment for 18,000 L, this vehicle is ideal for demanding industrial, sewer, and emulsion suction applications. A robust suction system for professional operations. Superstructure * Manufacturer: KROLL * Tank Material: S355J2+N (St 52.3) * ADR Suction/Pressure Tank K 1.0–18.0 / 36PESP * Tank Volume: 18,000 L (air volume) * Sludge Volume: 15,000 L * Emulsion Chamber: 3,000 L * Rinse Water Chamber: 1,000 L, non-pressurised * Discharge via robust ejection piston Vacuum System * CVS VacuStar W1600 – approx. 1,550 m³/h at 400 mbar * Approx. 30 m DN80 suction hose mounted on the tank lid, can be fully cleaned through High-Pressure System * Speck P52/100-150 – 100 L/min at 400 bar * Small hydraulic HD hose reel for 60 m DN13 * Equipped with approx. 60 m cleaning hose DN13 Special Features Lasdpsx Egx Usfx Afusc * ADR L4BH, incl. EX/II, EX/III & AT * Remote-controlled suction inlet for pre-chamber DN100 * Manhole DN500 (left side) * High-pressure gun * Soundproofing enclosure left and right in front of the pumps * Removable, swiveling halogen work lights * LED perimeter lighting * Radio remote control (including 2 batteries) * Tiltable scrap box * Reversing camera * Ladder with bracket and anchor points * Advertising boards left and right on the tank Technical Data * Gross vehicle weight: 32,000 kg * Length: 10,700 mm * Height: 3,800 mm * Width: 2,550 mm * Wheelbase: 3,900 mm Conclusion A high-performance Mercedes-Benz Arocs 3545 L 8x4 with large 18,000 L KROLL suction body, VacuStar W1600 and Speck P52 high-pressure system. Ideal for industrial, sewer, and emulsion suction projects requiring high durability and reliable technology. For further detailed information and pictures, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is made exclusively on our general terms and conditions and under exclusion of any warranty.

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, We offer these ready-to-use AUMA actuators and JC Spain gate valves, 10" to 42" gate valves with actuators, model "Valves for Oil Industry," year of manufacture 2016. Lsdpfx Ajy D Ilijfujac High-performance gate valves Sizes: 10" to 42" Pressure class: 600 lbs, Stellite 6 hardfacing and 13% Cr trim (internal parts) BWE (butt-weld ends), wedge type gate valve, bolted bonnet, OS&Y ASTM A-216 WCB (cast carbon steel) The majority of units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can refurbish the actuators and gate valves and provide a factory acceptance test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Model: 10" to 42" gate valves with actuator - 42" gate valves (2 units): equipped with AUMA SAEX 30.1 actuators. - 32" gate valve (1 unit): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (4 units): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (2 units): handwheel (can be fitted with actuators). - 16" gate valves (9 units): equipped with AUMA SAEX 14.6/GK30.2 Germany actuators (Ex-proof). - 10" gate valve (1 unit): handwheel Location: Ras al Khaimah, UAE If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Reach: 1300 mm Ljdsw N N Dcspfx Afueac Payload: 12.5 kg Weight: 33.5 kg Type: MSIP-REM-URK-UR10 Year of manufacture: 2018 Serial number: S300711 Welding machine Lorch S5 RoboMIG XT Cobot Welding current: 400 A.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Complete system for the cutting and optimization of both edged and unedged boards, ideal for sawmills and woodworking companies seeking high productivity and precision in the selection and cutting process. The line consists of a chain transfer for handling bundles, a robustly constructed bundle tilter with automatic collection of slats, a singulator, and a turning system for controlling both faces of the boards. Feeding is accomplished by loading directly onto the cutting line, which leads to the cutting machine. The core of the system is the Cursal model TROE 120-550-1000 cutting/optimization machine, equipped with a motorized carriage with a laser pointer for defect detection, brushless motorization, and a feed speed of up to 100 m/min, ensuring high precision and rapid processing. Main features of the cutting machine: Usable stroke: 400 - 5,000 mm Cutting length: 250 - 4,000 mm Workpiece height: 15 - 125 mm Board width: 100 - 960 mm Blade motor: 15 HP Optimization system with defect detection via laser. Lsdpfx Ajzf Rnyjfujac The system is also complete with: automatic discharge of waste directly into containers; discharge line for finished pieces leading to 6 sorting stations; complete electrical and electronic control panel; documentation and CE marking. Year of manufacture: 2010 Condition: disassembled and ready for transport.

Condition: new, KISTLER 4618A0 amplifier + 4067A2000 SN 1804719 sensor, unused in opened original packaging, 100% functional, scope of delivery as per photos Ljdpjy Srpuofx Afusac

Condition: new, Kistler 9041A piezoelectric force sensor SN 1607020, unused in original packaging, 100% functional, delivery contents as shown in photos. Laodpfx Aoy R Ivzsfuec