Used Samag Samag Mfz 2-2 for sale (78,830)

Condition: used, Year of construction: 2007, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 72 kVA, torque: 65 Nm, controller manufacturer: Indramat, controller model: MTC 200, total height: 3,000 mm, total length: 6,000 mm, total width: 5,500 mm, table width: 700 mm, table length: 1,100 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 70 bar, distance between spindles: 450 mm, spindle motor power: 28,000 W, number of spindles: 2, number of slots in tool magazine: 100, mount diameter: 63 mm, tool length: 320 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine is offered for sale as part of a package that includes two other machines of the same type and with similar operating hours. Godpfxjzk U Hwj Akaoug The advertised price is for the purchase of all three machines, plus a large spare parts package (including two reconditioned spindles), as well as an additional, fourth machine, which the buyer will receive free of charge. The machines can be inspected under power at any time by appointment.

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Guedpfx Aksvn Sv Usaeg Height: 4300mm Weight: 31000kg

Condition: used, Year of construction: 2012, machine/vehicle number: 51357, overall weight: 14,000 kg, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. Guodpjzy Ui Rofx Akasg For sale is a horizontal machining center manufactured by Samag, model: SM. TECHNICAL DETAILS Type of machining: Internal machining MACHINE DETAILS Total weight: 14,000 kg

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) Gjdpfxszxgf Uj Akaeug EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system

Condition: used, Year of construction: 1996, Technical details: x-travel: 2500 mm y-travel: 560 mm z-travel: 600 mm control: TNC 426 CA bore capacity in steel (diameter): 400 cm³/min Max. Milling-capacity: 400 cm³/min tool changer with: 34 Plätze Tool pull-in force: 12 kN spindle taper MT: SK 40 spindle throat: 580 mm Revolution per minute: 20...7500 steples U/min. max. torque on the spindle: 210 Nm distance spindle nose and table: 0 - 600 mm feed:: X/Y/Z = 1 - 24.000 steples mm/min. rapid traverse:: X/Y/Z = 24 steples m/min feed power: X/Y = 6 kN und Z = 8 kN kN table-size: 3300 x 500 mm table load capacity - central/maximum: 2500 kp interface: ja total power requirement: ca. 43 kW Weight approx.: 14,4 t dimension machine approx.LxWxH: 3,05 x 5,6 x 3,0 m dimension swarf conveyor LxWxH: 6.6 x 0,6 x 1,3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design. with integrated coolant supply link belt chip conveyor MAN+HUMMEL with cooling water tank and pump cooling lubricant treatment ALLWEILER AG, size L:1550 x W: 1000 x H:1200mm; filter belt width 500mm; pressure 30bar Hydraulic unit Gjdpfsvad Hpex Akasug Machining area can be partitioned, partition wall available *

Condition: used, Year of construction: 2017, operating hours: 1,113 h, machine/vehicle number: G30XL320839, The machine would be serviced by Zünd Spain! TECHNICAL DETAILS Zünd G3 XL-3200 Plotter Vacuum system: 1–9 kW Tool heads Universal tool head UM-ZS G3, working width: 60 mm Gsdpfx Akjzyktleasug Universal tool head UM-ZP G3, working width: 60 mm Operating hours: 1,113 h EQUIPMENT Zünd G3 XL-3200 Plotter, item no. 6343200 G3 Vacuum system, CIC, item no. 6438104 ICC camera for S3/G3, item no. 6539101 UM-ZS G3 Universal tool head, item no. 6531006 UM-ZP G3 Universal tool head, item no. 6531007 Universal cutting tool (UCT), item no. 6532001 EOT-250 Oscillating tool, G3, item no. 6532018 V-CUT tool, G3, item no. 6532021 Creasing tool type 1 (CTT1), item no. 6532051 Creasing tool type 3 (CTT3), item no. 6532053 Zünd Cut Center software package, item no. 6731200 Zünd Cut Center camera option, item no. 6731250 Zünd Cut Center V-Cut option, item no. 6731240 PC and monitor for Zünd Shipping costs for the plotter

Condition: used, Year of construction: 2004, machine/vehicle number: 1130.2623-31, No minimum price – guaranteed sale to the highest bidder! Gjdpfx Akozy Ukusaeug The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a CNC lathe manufactured by VDF Boehringer, model: NG 180-2. TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Type of current: AC Frequency: 50 Hz

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Gusdpsz Ad Dcefx Akaeg Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: ready for operation (used), functionality: fully functional, Facing and centering machine KUHN KAZ 80-2 -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering length / endless -Clamping unit with self-centering vice -Spindle drive 1.8 kW Gujdpfxoz Aquue Akaeg -Drill chuck -Chip tray -Connection cable -Forklift pocket for transport Dimensions: L x W x H 1.7 x 0.7 x 1.4 meters / Weight 600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 315 mm, feed length Z-axis: 175 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 50 rpm, quill travel distance: 175 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 9 m/min, rapid traverse Z-axis: 4 m/min, total width: 2,480 mm, total length: 1,620 mm, table width: 1,230 mm, table length: 410 mm, position of the milling head: vertikal, type of input current: AC, rotational speed (max.): 9,000 rpm, rotational speed (min.): 50 rpm, overall weight: 3,200 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, space requirement width: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 2,450 mm, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Due to restructuring measures, we are selling our CNC milling machine – Fehlmann Picomax 80 CNC 2/3 - robust Swiss precision machine - year of manufacture 1995 - low operating hours - very good condition considering its age - Heidenhain 315B control system - 4 axes (X, Y, Z + A [rotary axis]) - axes can be moved in parallel - travel distances X700 x Y315 x Z170 (+W495) mm - table 1,320 x 410 mm - 4th axis (rotary axis) AT100 original Fehlmann with 140mm three-jaw chuck and collet chuck - manual control panel - spindle 50 – 9,000 rpm - complete steel sheet enclosure with safety glass - fully functional - complete operating and programming manual - spare parts and service available from Fehlmann - machine can be inspected while powered on Gsdpozzd Hhjfx Akasug Depending on the price, a wired measuring probe (Renishaw), an electric fine milling and grinding spindle from RAY (Switzerland) 10,000 - 40,000 rpm, and various tool holders can be included. This offer is subject to change. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made with the exclusion of any warranty. Pick-up only (EXW) - no shipping.

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 1.511.030, functionality: fully functional, planing width: 240 mm, spindle diameter: 40 mm, number of spindles: 6, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 6 Min. planing width: 44 mm Godpfxozxch Ej Akaeug Max. planing width: 240 mm Min. planing height: 18 mm Max. planing height: 150 mm Infeed table length: 1,150 mm Spindle 1 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 2 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 3 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 5 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 6 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Feed rate: Automatic Min. feed rate: 6 m/min Max. feed rate: 24.1 m/min Feed rate control: Stepless Conveyor motor power: 8.7 kW Conveyor drive: Cardan drive Diameter of feed rollers: 140 mm MACHINE DETAILS Control system: Schneider Voltage: 415 V Current consumption: 144.3 A Fuse rating: 200 A Connected load: 60 kW Diameter of dust extraction nozzle: 125 mm Lubrication system: Manual Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,800 mm Unladen weight: 2,000 kg Shipping packages: 1 unit

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, rotor diameter: 600 mm, rotor width: 1,000 mm, year of last overhaul: 2026, Shredding mill, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 75 kW Hopper: Conveyor belt hopper Working width: 1000 mm Rotor diameter: 600 mm Year of manufacture: 2015, completely overhauled with - new rotor Gedez Ak A Ejpfx Akaeug - new hopper - new base frame Examples of applications: Shredding of solid lumps, start-up blocks, profiles, beverage crates, boxes, vegetable crates, etc.

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser Godpfxjuxfu No Akajug - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Gusdovbdyfjpfx Akasg Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 100 mm, throat depth: 400 mm, overall weight: 6,000 kg, working length: 3,000 mm, TECHNICAL DETAILS Axes: 5 Pressing force: 1,000 kN (100 t) Maximum bending length: 3,000 mm Distance between side supports: 2,600 mm Overhang: 400 mm Guodpfx Aozxnggjkaeg Stroke: 100 mm Installation height: 370 mm Number of cylinders: 2 Rapid traverse: approx. 85 mm/s Working speed: 10 mm/s Return speed: approx. 80 mm/s MACHINE DETAILS Oil filling capacity: approx. 85 l Motor power: approx. 10 kW Dimensions & Weight Dimensions (L x W x H): approx. 3,300 x 1,930 x 2,325 mm Machine weight: approx. 6,000 kg

Condition: good (used), Year of construction: 1995, For sale is a used Langzauner LZK 3/2 edge grinding machine with a grinding belt length of 2600 mm. The machine is in good condition and has been inspected by our qualified personnel. Godjz Anxdepfx Akajug Technical data: - Table size 980 x 340 mm - Grinding belt length 2600 x 150 mm - With oscillation - Incl. veneer grinding attachment - Incl. feed mechanism - Motor power 2.4 kW / 3.3 HP - Year of manufacture 1995 The machine is located in A-5431 Kuchl and can be inspected during our opening hours. Related terms: grinding machine, edge grinding machine, edges, KSM, KSM 260 Reference: R-F13KS

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters Guedpsy A Ei Nsfx Akajg • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Condition: good (used), Year of construction: 2013, functionality: fully functional, arm reach: 1,611 mm, For sale is a Kuka industrial robot, model KR 16-2. - 1x pedestal for the robot, height approximately 30cm Guedpfx Aezzaclskaeg - 1x KRC4 control cabinet - 1x KCP4 operator panel, 00-168-334 - Connection cables - Shipping is possible for an additional charge.

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, overall weight: 1,069 kg, load capacity: 120 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 120 R2700-2 with KR C4 – AS NEW / only 19.95 operating hours We offer a KUKA KR 120 R2700-2 industrial robot in as-new condition with KUKA KR C4 controller. Manufactured in 03/2019 with only 19.95 operating hours. Robot specifications - Model: KUKA KR 120 R2700-2 - Payload: 120 kg - Reach: 2701 mm - Year of manufacture: 03/2019 - Operating hours: 19.95 h - Cable set: INT 084ST2700 Guodpfxszyyyns Akasg - Configuration: ES13 133 CTR MB1 PNT EPS AIR - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.5 - Servo configuration SC4.1 - 400 V transformerless power supply - Siemens SCALANCE X208 - Parallel Safety interface X11 - Ethernet interface X66 - CSP 2x USB 3.0 - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PROFINET M/S 4.1 - KUKA.DiagnoseSafety 3.0 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 4557182, overall weight: 57 kg, load capacity: 10 kg, arm reach: 901 mm, controller manufacturer: KUKA, controller model: KRC5 micro, We are offering this very well-maintained KUKA KR 10 R900-2 industrial robot and KRC5 micro controller, manufactured in 2022. Year of manufacture: 11/2022 Payload: 10 kg Reach: 901 mm Gedpjzzkg Ujfx Akaoug Robot weight: 57 kg Including KRC5 micro controller Including complete robot cell as shown in the picture The system provides an excellent basis for a wide range of automation tasks, such as pick & place, machine loading, machine unloading, assembly, parts handling, sorting, inspection, measurement, packaging or singulation tasks. The robot or cell can also be sold separately! Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, overall weight: 59 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: Kuka, For sale is a modern robotic cell with a KUKA industrial robot, model KR 10 R1100-2 / SEL, from the AGILUS-2 series. The system is in very good, like-new condition and is ideally suited for various automation, handling, assembly, or testing applications. The robot is installed inside a robust, fully enclosed safety cabin made of aluminum profiles with large, transparent protective elements. The cell features an integrated linear/positioning unit and a customer-specific gripper or tool mounting. Due to its compact design, the system can be easily integrated into existing production environments. Technical data of the robot: - Manufacturer: KUKA - Type: KR 10 R1100-2 / SEL - Series: AGILUS-2 - Year of manufacture: 03/2025 - Payload: 10 kg - Reach: 1,101 mm - Robot weight: 59 kg - Article number: 0010028076 - Serial number: 4613832 Godszznziepfx Akaeug - Origin: Germany The offered unit includes the robotic cell shown in the pictures, including the robot, enclosure, and the mechanics or peripherals installed within the cell, as depicted in the images. The system is suitable, for example, for pick-and-place applications, machine loading, parts handling, assembly, testing, and sorting tasks, as well as a basis for customer-specific automation projects. Condition: very well maintained / like new Year of manufacture of the robot: 2025 Inspection: possible by appointment. Subject to prior sale and errors.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8696, Year of construction: 2015, operating hours: 7,673 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: simplex, construction height: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,500 mm Overall height: 3,100 mm MACHINE DETAILS Gsdpfx Akezy U Sreasug Mast type: Simplex ISO class: 3 (2,500–4,999 kg) Drive type: Internal combustion engine Operating hours: 7,673 h EQUIPMENT Fork positioner Heater Full cabin External reference: SL9839SP

Condition: repair required (used), functionality: not functional, Year of construction: 2014, Paper Spike 2 G, typ 2000, Dimensions of machin 2850 x 2350 x 2000mm (L x W x H). weight 2800 kg Guedpszzzq Rsfx Akaeg

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 13341-T, total width: 1,420 mm, total length: 1,576 mm, total height: 1,100 mm, overall weight: 2,000 kg, cooling capacity: 20 kW (27.19 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, Equipment: cooling unit, The system was taken out of service a year ago due to a switch to a centralized system. One year before decommissioning, all TCF elements were replaced. We can provide support for recommissioning. Technical data: - Total filter capacity approximately 210 l/min - Filter fineness approximately 3 μm nominal - Tank capacity approximately 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter columns - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system via a settling tank and scraper conveyor - In-line cooling via the return flow from the filter columns to the clean oil area via the plate heat exchanger, including flow control in the chilled water circuit - Color RAL 7035 Guodpezxhcnefx Akasg - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 2 pcs. machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approximately 100 l/min - Delivery pressure: approximately 10 bar - Drive: 400V, 50Hz 2 pcs. drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approximately 30 l/min - Delivery pressure: approximately 6 bar - Drive: 400V, 50Hz 1 pcs. screwed plate heat exchanger with cooling control approximately 20kW Designed for cooling water 70 l/min, 13°C supply temperature.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10006472, total height: 2,200 mm, overall weight: 900 kg, space requirement length: 1,800 mm, space requirement width: 100 mm, Filter and extraction unit with automatic cleaning. Suitable for smoke extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 2020 Gusdpozwxanjfx Akasg Model: 10124806 Serial number: 10006472 Motor: 4 kW - 400 V Number of filter cartridges: 2 Raw gas inlet: 200-250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,200 x 1,800 x 2,200 mm Weight: 900 kg Note: No warranty, installation, commissioning, and transport are included. Subject to prior sale.