Used Sas Sas Super80 Air Sampler for sale (27,326)

Condition: used, This listing is for a SAS Super80 Air Sampler The unit is in full working condition and is ready for immediate release. The SAS Super series (by SAS / Bioscience International, also referenced under other distributors) are impaction‑type microbial air samplers. They draw a known volume of air through a sampling head so that airborne microorganisms are impacted onto an agar contact plate (or Petri dish) for subsequent incubation and colony counting. Iodpfx Aiexv Abasysbb These instruments are commonly used in cleanrooms, pharmaceutical manufacturing, hospitals, and other controlled environments to assess airborne microbial contamination. Good combination of high airflow + relatively compact unit; allows efficient sampling of large volumes in minimal time. Wide usage and long track record (models from this family have been used since the late 1970s/80s) which implies reliability and a mature support ecosystem. Flexible head options (aluminium, stainless steel, resin), choice of plate types (contact plates or standard Petri dishes) in some variants. Strong traceability / data capture features, which are important for regulated environment

Condition: used, This listing is for the Churwell PBI air sampler SAS Super with case and charger The unit is in full working condition and is ready for immediate use Churwell PBI Air Sampler SAS Super 100 L with Case and Charger The Churwell PBI Air Sampler SAS Super 100 is a widely used microbiological air sampling device designed for cleanrooms, pharmaceutical environments, operating theatres, and laboratories. It enables reliable air monitoring by collecting air-borne microorganisms onto contact plates or Petri dishes. Key Features: Sampling Principle: Designed to collect airborne microorganisms on microbiological agar by impaction, produced through controlled air aspiration. High Sampling Efficiency: The SAS Super models—such as the SAS Super 100 and SAS Super 180—can collect particles down to 1 micron. The SAS Super 100 offers a sampling rate of 100 liters of air per minute. Digital Control: Features a digital interface for setting sampling volume, duration, and storing operator information. Battery-Powered: Equipped with a rechargeable battery, allowing for multiple sampling sessions on a single charge. Comes with a charger included. Portability: Lightweight and easy to carry with a protective case, ideal for field use or portable cleanroom monitoring. Technical Specifications: Air Flow Rate: 100 liters per minute Dimensions: 10.5 × 11 × 29 cm Weight: 1.75 kg Data Management: Some models support data logging and CFR 21 Part 11 compliance (varies by version) Materials: Typically stainless steel or autoclavable materials for sterile environments Accessories and Options: Iedsxv Dpxepfx Aiyebb Aspirating heads (stainless steel or disposable) Tripods and stands Calibration adapters USB data cable (for models with digital logging)

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). Iodpfszlhp Usx Aiyebb A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 500 mm, For Sale – Elumatec SA 142/25 Aluminum Saw (1997) Machine: Elumatec SA 142/25 Type: Automatic aluminum cutting saw (suitable for aluminum and light-metal profiles) Year: 1997 Ijdpfxjxz R Ixs Aiysbb 🔧 Technical Specifications Saw blade diameter: 500 mm Blade rotation speed: 2800 rpm Feed length per cycle: 5–600 mm Cutting angle: 90°, with possible bevel/mitre capability depending on machine configuration Power supply: 230/400 V, 3-phase, 50 Hz Air supply required: 7 bar Suitable materials: Aluminum profiles, thin-wall light-metal profiles, window/door profiles and general industrial aluminum cutting ✅ Features & Benefits Reliable industrial saw designed for high-volume aluminum profile cutting Strong and stable construction with a 500 mm blade for fast, clean cuts Step-feed system (5–600 mm) enables efficient serial production and flexible cutting lengths Ideal for window & door manufacturers, metal workshops, façade builders, and any company working with aluminum extrusions Simple, durable design – easy to maintain, spare parts widely available 📌 Notes Requires 3-phase electrical connection and compressed air (7 bar) Angle-cutting functionality should be verified depending on the machine’s configuration Machine condition and accessories can be confirmed upon inspection. Chip vacuum is included in this sale! Please verify the accuracy of the machine specifications with the seller.

Condition: used, Year of construction: 2006, FIAC CRS20 Soundproof Screw Compressor – Year 2006 Complete with a 500-litre air receiver and FIAC DS20/AC refrigerated air dryer, ideal for ensuring a continuous supply of compressed air with low noise levels. Ibjdpfjzq Amrjx Aiyjb Technical Specifications Air delivery (F.A.D.): 1,860 l/min Maximum pressure: 10 bar Power consumption: 17.6 kW Motor power: 20 HP Air receiver capacity: 500 litres Weight: 461 kg Availability: Delivery scheduled for September 2026.

Year of construction: 2004, condition: excellent (used), The complete line includes: 1. GUSBI – 24 Station rotary table with PU ( polyurethane ) robot applicator. Brand : GUSBI Italy Model : PF24 Serial no. 4625 Year of production : 2004 Number of station : 24 Size of each station : 600mm x 500mm Iedpfx Ajgcvc Tsiyebb Power – 30 KW Pneumatic – 500nl/min by 8bar Output / shift 8h – 2.000 – 3.500 pcs. – depends on size and quantity filter on each station 2. Automatic Rotary Pleating Machine Brand : SAS Italy Model: PANELFILTER Type : 350/190 Power – 3,5 KW Pneumatic – 6 bar – minimal consumption Year of production 2004 No. of rotary rollers / blades / sets – 8 pcs. - pleat height 20mm - pleat height 28mm - pleat height 32mm - pleat height 36mm - pleat height 38mm - pleat height 40mm - pleat height 48mm - pleat height 53mm - pleat height 60mm Machine is design ready for trapezoidal pleat pack. 3. Hot Melt dispenser / applicator : Brand : NORDSON USA Type : VA 025-4FFXX4, 400V Model : Versa Blue 8036-189 Serial no. LU04B01511 Year of production 2004 Tank size for HM : 50kg No of heads – 3 Power - 11 KW Pneumatic – 6 bar – minimal consumption 4. Aluminium moulds - 131 pcs. for 100 types of diffrent automotive air panel filters. Additional we offer transfer of know how & trainning.

Condition: good (used), Year of construction: 2013, MANUFACTURER GRASSAIR TYPE RLR150V7 AIR Serial No. API211340 Year 2013 Power (kW) 110 Capacity (m3/min) 10 Iedpeykagqjfx Aiyjbb Pressure (bar) 9.5 Operating hours (DOC/TOTAL) 43007 Frequency inverter yes Built-in dryer no Heat exchanger yes Cooled (air/water) air On tank no Documents no Connection 2 NEW/USED used

Condition: good (used), Year of construction: 2000, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 20FT ISO CRYOGENIC TANK CONTAINER Manufacturer: Air Liquide Italia S.r.l. ISO Code 6346: 22KW IMO Portable Tank IMO Type 7 Transport Instructions: T75 Ibodpezd Sauefx Aiyeb ADR RID Tank Code: R11.7BN ISO Code 6346: 22KW Max. working pressure: 8 bar Hydr. test pressure: 11.7 bar Design Temperature: min -196 °C Material (Inner & Outer Vessel): High-grade Stainless Steel (X5CrNiN1810 UNI 7500) Insulation: Vacuum Double Envelope (Excellent current vacuum: 0.052 mbar) Safety Valves: 2x Herose Relief Valves (Set at 8 Bar) (p. 1) Vaporizers: Included & complete with piping Last Inspection: June 9, 2026 (5-Year Periodic Inspection by Bureau Veritas) Next Inspection Due: 12-2028 CSC Validity: Until 12-2028 (p. 1) Approval/Regulations: IMDG, ADR, RID, CSC, US DOT (p. 1) = Further Information = Year of Construction: July 2000 Model Year: 2000 Usable Material: Gas Unladen Weight: 8,300 kg Payload: 25,700 kg GVW: 34,000 kg Technical Condition: good Optical Condition: good Please contact Arne Honingh for further information.

Condition: good (used), Year of construction: 1984, operating hours: 5,800 h, Linde H30D, Duplo315, with 3rd function, 3-cylinder, air-cooled DIESEL, as traded in. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Iodpfx Aisz Dhc Noyebb Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each Ibsdpfx Asxc T Evsiyeb o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Iodpfxsyy U Shj Aiyebb Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Year of construction: 1996, Compair Cyclon 6000N screw compressor 75kw power: 75 Kw air transport : 12.9 /min :774 m3/h Ijdpfx Aeh Unhneiyebb pressure: 8 bars voltage: 400v 50Hz 3 phase Construction of year: 1996 hours:51000h weight: 1800 kg Size: length: 2100mm width: 1700mm Height: 1510mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Filter system, clean air filter, fine filter, filter, compact filter, HEPA filter, filter cassette Isdpfxjz Ahkas Aiysbb -Handover: in its current condition as inspected -Filter: slightly damaged, see photos -Manufacturer: Filt Air, Air filter type GT4-13AE-YACO -Front frame dimensions: 1210 x 600 mm, see photo of the type plate -Connection: Ø 205 mm -Quantity: 1x air filter included -Dimensions: 1210/130/H600 mm -Weight: 16 kg

Condition: excellent (used), Year of construction: 2019, overall weight: 500 kg, total length: 2,000 mm, total width: 1,600 mm, total height: 2,200 mm, Load capacity: 2,200 kg Table – Ø: 1,525 mm Band width: max. 150 mm Band thickness: max. 1.27 mm Stack height: max. 760 mm Ibjdpezvqzzefx Aiyob Speed: max. 10 RPM, continuously adjustable Design: o Frame in a robust welded construction o Loop control via a joystick with a roller o Speed can be pre-selected via a display o Right/left rotation o Fixture for inner diameter

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m Iodou Nz Dnspfx Aiyebb compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar *

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 Ibsdpfsy Iplfjx Aiysb 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar Iedpfjzav Ddsx Aiysbb - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: good (used), Year of construction: 2024, Refrigerant dryer, OMEGA AIR, RDP 75 – used: Price ex works: €750.00 (net)! Manufacturer: OMEGA AIR Type: RDP 75 Isdpfxezbydwe Aiyjbb Year of manufacture: 2024 Nominal flow rate: 75 m³/h Max. operating pressure: 16 bar Ambient temperature during operation: 1 °C to 45 °C Max. air inlet temperature: 55 °C Ph~V-Hz: 1~230-50/230-60 | 0.40 kW Protection class: IP20 Contains fluorinated greenhouse gases Refrigerant: R513a | 0.39 kg | CO₂ equivalent 0.22 t Operating hours: unknown Condition: good Available: from approximately August 2026

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Hotronix Thermal Transfer Press XRF” Item for Sale: 1x Hotronix Thermal Transfer Press XRF with the following features: Includes compressor Condition: This listing is for a used device that may show signs of wear (minor scratches or discoloration). The device has been tested to ensure it is in working order. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please schedule an appointment to do so! Sturdy packaging and worldwide shipping are available upon request! Ibedozpwzuepfx Aiyeb Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: good (used), Year of construction: 2008, Offer 26289 Approximate technical specifications: Ibsdozvnb Sspfx Aiysb - CNC flame cutting machine with 2 torches, as shown in the picture - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Supporting table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons - Without supporting table!

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Ibsdpoy Ryrbefx Aiysb Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 removal unit / CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: excellent (used), Screw compressor Ecoair Type D40 Final pressure 10 bar Power 30 kW Read operating hours 58403 Ibedpfx Ajvu S Ideiyjb

Condition: used, suitable for nitrogen all stainless steel Ibjdpfx Aozz H T Rjiysb belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,500 kg, cooling capacity: 50 kW (67.98 HP), volume flow: 10 m³/h, The Air Liquide cooling and heating system is a process thermostat designed for optimal and precise temperature control for any application demanding rapid, precise, and powerful thermal control between -80°C and +70°C. The temperature control unit works by thermally conditioning the heat transfer fluid Syltherm XLT within a closed-loop circuit. For cooling, liquid nitrogen (LIN) is used as the cryogenic medium to lower the fluid's temperature. For heating, an integrated electric resistance heater raises the fluid temperature to a maximum of +70°C. The conditioned fluid is then circulated from the unit to the external application to enable precise process temperature control. The system is fully automated, ensuring precise and reliable process control with minimal manual intervention. Original paper documentation is included. • Year of manufacture: 2016 • Manufacturer: ALTEC GmbH • Condition: Fully functional Ibedpfxswt A Eij Aiyeb • Cooling Capacity: 50 kW • Operating temperature: -80°C - 70°C • Automation: Fully automated operation • Documentation: Original paper documentation included • Heat transfer fluid: Syltherm XLT • Heat transfer fluid flow rate: 10 m³/h • Material: Stainless steel 304L (1.4541) Dimensions: • Width: 1800 mm • Height: 2000 mm • Length: 3500 mm • Weight (empty): 2500 kg • Insulation: PU foam and aluminium sheet cladding Potential Applications Include: • Pharmaceuticals: API synthesis, reactor cooling, vaccine storage, biotech applications. • Food Processing: Flash-freezing, quality preservation. • Aerospace/Automotive: Component testing, material treatment. • Electronics: Manufacturing and testing. • Materials Science: Cryogenic milling and processing. • Research & Development: Any application requiring precise thermal cycling. We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Ibodpsyl S Ebsfx Aiysb