Used Schwimm-Ponton Floating Pontoon for sale (310)

Condition: ready for operation (used), Floating pontoon made from gravel extraction. Hnjdpozck A Tofx Akreu

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW Hnodpfx Aez N Sy Dekreu FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Year of construction: 2004, condition: ready for operation (used), For rent, I offer various bridges/gangways/landing platforms. Lengths range from 8 to 15 meters. Hjdpeiab Aijfx Akrsnu They can be used as construction bridges, pedestrian bridges, in water engineering, etc. Matching floating pontoons are also available upon request.

Condition: excellent (used), functionality: fully functional, For sale: an industrial submersible pump, ORPU Sonel B 60/2, manufactured in Germany, with a maximum flow rate of 80,000 liters per hour. This pump is designed for draining and pumping water. Technical specifications: Brand: ORPU Model: Sonel B 60/2 Maximum flow rate: 80 m³/h – 80,000 l/h Maximum head: 25 m Power: 5.2 kW Power supply: 400 V, three-phase Frequency: 50 Hz Hsdpfx Akez Syk Asrjnu Manufacturer: Oranienburger Pumpen + Verdichter GmbH Country of origin: Germany The pump is equipped with a metal housing, a lower suction basket, a discharge connection with a quick-release coupling, a power cable, a float switch, and a carrying handle.

Condition: used, functionality: unexamined, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Hnedpez S Nbwjfx Akrju Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: refurbished (used), functionality: fully functional, gearing type: mechanical, Year of construction: 2001, operating hours: 21,000 h, Float dredger for sale. Useful production depth from until 16 meters. The bucket conveyor consists of 46 members, it brings up about 3 m3 of material in a single rotation. The machine has a capacity of approx. 90-120 t/h depending on the depth. Hnjdpfx Akovv Nwxereu The length of the basic machine is 20 m, to which 4 pieces of 20 m floating conveyors with 650mm belt width and a 30 m discharge conveyor are connected together with the associated power cable. The floating dredger was completely renovated 4 years ago. The drive of the bucket conveyor has recently been modernized with a frequency converter for torque and speed control. The machine can be seen in operation near Letenye. As an option, a 400 kVA diesel aggregate is available for the machine, which allows the machine to be operated independently of the electrical network.

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster Hedsz Sw Nijpfx Akrsnu :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM Hjdpfez Dnr Rsx Akrenu NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Hjdpfxswm Nd Es Akronu

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, A significantly large capacity Float/Sink tank available from this renowned English specialised manufacturer. All mechanical parts are in excellent order , and apart from re-assembly the equipment is ready to go to work . Estimated at a capacity of 4 - 5 tonnes per hour on Rigid materials, this represents extraordinary value, and is available in the UK avoiding Internationaal transport costs and taxes. An inclined friction washer and materials drier/cleaner are also available - photos included. Hnedpfx Asw D Uggjkrsu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, LiSEC – PKL, SBL, ATL, LBR, GFB-60/30 RE-S, VB-45 Float (Low-E) and Laminated Glass Cutting Line with mobile overhead crane (gantry) with rotating suction frame for automatic pick-up of large-sized glass sheets (jumbo) and automatically movable shelf rack storage systems (LBR). Construction year: 2008 Max. glass size: 6000 x 3210 mm In good condition. Inspection is possible by appointment. Available: NOW Hnodey Ruliepfx Akrou

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Hnodpfx Aezzdyzjkrsu Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €39.900net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €39.900 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors - Automation and control systems - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Hsdpfx Ajz Rv Dpokronu Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Year of construction: 2016, operating hours: 9,580 h, condition: excellent (used), functionality: fully functional, Edge Polisher Comandulli Musa 7+4 DX Partially worked meters: 5578 m Hnodpszipzgofx Akreu Total operating hours: 9580 h Working direction: from right to left - Advance/feed speed (conveyor belt): 0 to 3 m/min - Belt width: 600 mm - Working thickness: 10 to 80 mm - Min. working width: 80 mm - Max. working width (without bar): 1200 mm - Max. working width (with bar): 3000 mm - Loading plane height: 750 mm Aggregates: - Calibrating spindle with vertical and horizontal positioning for a 260 mm diameter flat diamond wheel - Edge polishing spindles, no. 7, with floating mechanism – oscillation - Beveling spindles, no. 4. The first two beveling spindles (no. 1 upper and no. 1 lower) are inclined at 45° and equipped with the mechanical locking system TMM3. Two spindles at 45° (no. 1 upper and no. 1 lower) for polishing the previously generated bevels. Automatic valves for water 2 roller tables, each 1.5 m long Color touch screen Rated output: 22 kW Dimensions (excluding rollers): 5.15 x 1.8 x 1.74 m Weight: 4000 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Hedpfoz Ru Iyex Akrsnu Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: excellent (used), CATALOGUE NUMBER 8017 TECHNICAL DATA - track width 335mm - arbor width 400mm - max. blade diameter 350mm - blade arbor hole diameter 80mm - max. cutting height 120mm - table width with clearance 700mm - table length 1720mm from above: - guides/pawls - roller, sliding pressure, metal - guides/pawls - roller, sliding pressure, metal - arbor with saw blades - sliding pressure arbor, metal, 2 pcs from below: - pneumatic guide rail - sliding metal roller - guides/pawls - track - sliding metal roller, outfeed - electric body lifting 0.35kW - manual arbor lifting with saw blades - central lubrication - stepless feed rate adjustment 1.5kW - main motor 30kW - laser 3 pcs - floating blade - additional sleeve for multi-blade saw - saw blade cleaning - extraction nozzle diameter 260mm - overall dimensions L/W/H 2300x2000x2150mm - weight approx. 3000kg ADVANTAGES – German production – floating blade – laser 3 pcs – saw blade cleaning – additional sleeve for multi-blade saw Hodozrmqwjpfx Akrjnu – pneumatically adjustable guide rail – stepless speed adjustment – used multi-blade saw, very good condition Net price: 136900 PLN Net price: 31837 EUR depending on the exchange rate of 4.30 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, automatic laminated glass cutting table for glass sizes : 3710 x 2600 mm max. glass cut : 3700 mm laminated sheet thikness : 33.1 - 88.12 - 1010.4 float glass thikness : 3 - 10 mm min. squaring : 110 mm max. squaring : 2750 mm min. breaking : 60 mm min. separation : 60 mm work table height : 900 mm machine dimension : 5000 x 3500 mm including loading table BAVELLONI REV 372 R with integrated loading arms max. loading glass size : 3710 x 2600 mm machine dimensions : 3500 x 4250 mm Hsdpoz Nft Djfx Akrsnu total dimensions for both tables work space : 7000 x 5000 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm Hnedpfez N Dqujx Akrsu glass thikness : 2,3 - 19 mm This table has NO option for low e deletion

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 030-062962, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 6,000 mm, LiSEC ESL-6030RS-L – Automatic Glass Cutting Line Complete automatic LiSEC line for precise and high-speed cutting of float, Low-E and laminated glass. Manufactured in 2013, the line consists of four interconnected components that together form a complete system for glass loading, transport, cutting and breaking. The cutting table is equipped with a magnetic drive and a Low-E coating removal head, allowing coating removal and glass cutting within the same process. Line Components: 1. Float and Low-E Glass Cutting Table - Model: LiSEC ESL-60/30RS-L - Serial number: 030-062962 - Year of manufacture: 2013 - Glass thickness: 2–19 mm - Cutting of straight and irregular shapes - Low-E coating removal system 2. Laminated Glass Cutting Table Hnsdpfx Ajz Ilrijkrju - Model: LiSEC VB-33 - Serial number: 040-014769 - Year of manufacture: 2013 - Designed for cutting laminated glass - Supported configurations: 33, 44, 55, 66 and 88 3. Glass Breaking Table - Model: LiSEC BTS-37/33 - Serial number: 054-054715 - Year of manufacture: 2013 - Weight: 1,525 kg - Maximum load: 55 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 10.89 kVA - Operating pressure: 8 bar - Protection rating: IP32 4. Tilting and Transport Table - Model: LiSEC ATH-60/30FD - Type: Double-Sided Moveable Glass Un/Loading Station - Serial number: 011-071248 - Year of manufacture: 2013 - Weight: 6,040 kg - Maximum load: 48 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 7.80 kVA - Operating pressure: 6 bar - Equipped with new mechanisms and vacuum suction cups for handling glass sheets Condition: - The complete production line is in good working condition and fully operational, - Documentation and additional technical information are available upon request, - A set of spare parts is included with the production line, along with an estimated value of the spare parts, - The production line will be available for collection from December 2026, - On-site inspection of the machinery is possible by prior arrangement. Note: - Glass racks for jumbo glass sheets are not included in the sale (we provide drawings for their construction) - The metal guideways in the floor for the Tilting and Transport Table are not included in the sale

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Hsdpfx Akoz Alfusrsnu Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Condition: new, Year of construction: 2026, functionality: fully functional, The STF 3.0 float-sink separator with a highly efficient SP1000 Mk2 centrifuge and VS1 water screen. A compact yet powerful washing system that requires little maintenance and can wash and sort up to 3,000 kg/h of hard plastics. The machines are constructed entirely from 304 stainless steel, allowing salt solutions to be used without any issues. Hnjdpfx Akexhf H Nereu A zinc float tank with centrifuge, water screen and big bag station is in stock and available for immediate delivery; further machines are available to order. Please contact us for further information.

Condition: excellent (used), CATALOGUE NUMBER 7890 Technical specifications: - track width 245mm - shaft width for the edger 380mm Hjdpfxjzhvhks Akrsnu - shaft width for the multi-blade saw 320mm - max. blade diameter 350mm - blade arbor diameter for the edger 80mm - blade arbor diameter for the multi-blade saw 65mm - max. cutting height 120mm - table width with clearance 900mm - table length 1780mm – from above: - feed rollers/ejectors - smooth pressure shaft - feed rollers - smooth pressure shaft - insert for short pieces - shaft with saws - 2 smooth pressure shafts – from below: - guide - feed rollers/ejectors - track - central lubrication - laser - stepless feed speed adjustment - feed motor 1.1kW - main motor 30kW - manual lifting of the machine body - manual lifting of the saw shaft - dust extraction nozzle diameter 210mm - overall dimensions L/W/H 1900x1500x1800mm - weight approx. 2000kg ADVANTAGES - German production - stepless feed speed adjustment - floating blade shaft for edging - multi-blade saw sleeve included - laser - insert for short pieces - multi-blade saw, used, very good condition Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic tiltable float glass cutting table for half jumbo sizes workable dimension : 3760 x 2760 mm 5 tool store the pc is supplied complate with CR ROM drive , 3,5" modem and network card , color monitor and windows Hnedpfx Akjz Imnfereu with straight and shaped optimisation possibl for vinyl cut and digitalization with laser for templates glass thikness : 3 - 19 mm acceleration speed : 150 m/min cutting tolerance : 0,15 mm breaking bars : 2 + 1 workable table height : 900 mm machines sizes : L x w x H = 6000 x 2275 x 2250 mm installed power : 5,6 Kw weight : 2500 kg

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51.I613-020-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are kept suspended by injected air and consequently float downwards. The applications include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two unbalanced motors and a fan with a motor. Nominal width: 600 mm; sieve aperture 0.6 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, amplitude, inclination, speeds, etc. Design: dust-tight Control cabinet: is not included; 2 x 500 W unbalanced motors and 1 x 4 kW fan The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex works at a port or at the production facility in the Netherlands. Hnjdpfx Aszkup Eokrsu The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total width: 300 mm, total length: 300 mm, total height: 150 mm, overall weight: 10 kg, Equipment: documentation/manual, MarSurf M400 MarSurf RD 18 Mahr surface roughness measuring instrument with evaluation unit Brand: MAHR Model: MarSurf M 300 + feed unit RD18 Probing system: Free-floating probe system Measuring principle: Skid tracing method Probe: Inductive skid probe Measuring unit: selectable Measuring range: 350 µm Profile resolution: 8 nm Parameters: Ra, Rq, Rz (Ry (JIS) corresponds to Rz), Rz (JIS), Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) corresponds to Rmr), RSm, RSk, RS, CR, CF, CL, R, Ar, Rx, Rv Vertical scale: automatic/selectable Horizontal scale: dependent on the cutoff Total evaluation length according to ISO/JIS: 1.25 mm / 4.0 mm / 12.5 mm Number (n) of individual measuring lengths according to ISO/JIS: selectable 1-5 Hnsdpfx Akoz E Rkxorou Scanning speed: 0.5 mm/s Probe tip radius: 2 µm Measuring force: approx. 0.7 mN - Bluetooth connection between the feed unit and the display unit. - Measurement in all directions: horizontal, vertical, and overhead. - The battery in the feed unit and the central unit was replaced in 2025. - A roughness standard for calibration is included in the feed unit. - A new measuring tip is included, Mahr PHT6-350. The device is being sold because we had to purchase a combined contour and surface measuring instrument. You are welcome to come and inspect the device. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale.